- Joined
- Feb 14, 2019
- Messages
- 203
- Motherboard
- Gigabyte Z390M
- CPU
- i5-8400
- Graphics
- RX 570
- Mac
- Mobile Phone
.Ok thanks for the prompt answers, I'll keep them ON, and add -v for seeing what clover is doing
- dart=0 protects against VT-d issues, so it's always recommended.
- slide=0 works alongside OsxAptioFix2Drv-free2000.efi to prevent "Couldn't allocate runtime area" errors during boot. Both of these are virtually essential on Z390 Gigabyte motherboards.
This is odd and should not happen. Are you running the latest BIOS? It might be a good idea to update or re-flash BIOS then configure BIOS parameters once again starting with "Save & Exit --> Load Optimized Defaults".
Yes I have latest bios drivers for my motherboard, if you want I can provide you the bios setting screenshots...?
If this does not remedy the problem, there might be a hardware problem. Do you have Firewire or other PCIe cards other than a graphics card? If so, try removing them (keep the graphics card installed, however).
yes I have fence wifi & bluetooth PCie card installed for internet & its working flawlessly...
If this also does not help, test your memory using Memtest for Mac as explained here.
Also ensure that all PCIe cards and memory DIMMs are properly seated on the motherboard. Also check power cables.
They are all on and solid connections
And lastly, how many SATA drives are connected internally (how many of the onboard SATA ports are you using)? And how many of the NVMe slots are occupied? Based on this, please consult the motherboard user manual to determine which SATA ports can and cannot be used.
I have m2samsung 500gb drive which has OS on it, and a 1tb sata wd green hdd
This looks okay. You may want to add "-v" (verbose) until the 1-in-5 boot-freeze problem is resolved.
ok
İ have a 500w power supply & sometimes when I open computer after 3 days off period, graphics card leds on it won't turn on and I can't see screen after I restart the computer everything get backs to normal, do you think my power supply is a bit underpowered for my system ...???
I replied under your questions in green
Thank you again