Ethernet is on en0, iMessage and AppStore are working fine.
I have not a webcam but I have a microphone connected on front panel.
There is nothing connected to usb atm.
Each OC update
- I rebuild my config.plist from "Sample.plist" in the Opencore package. following dortania's guide and my previous version config.plist.
- Update the 4 OC files
- Update the Kexts if avalable
- Keep the same "Drivers" and "Tools" as the previous version
Ethernet is on en0, iMessage and AppStore are working fine.
I have not a webcam but I have a microphone connected on front panel.
There is nothing connected to usb atm.
- Under Nvram : -v darkwake=0 npci=0x2000 alcid=7 shikigva=80 : npci=0x2000 not need for Asus (F.E.) , alcid=7 : must be adjusted according to your system , you can add keepsyms=1 debug=0x100 to see/stop debug infos while booting
- Under PlatformInfo :generate your own SMBIOS : add MLB, SystemSerialNumber, iMacPro 1,1 or MacPro 7,1 if you prefer, add SystemUUID etc...
3 / replace USB.kext with yours
While booting at OC gui press the space bar if you want more boot options
I just put a (genuine) BCM943602CS with a cheap PCIe adapter and it works oob in both BT and WIFI.
But.. But I have got some problems with Airdrop and Handoff.
First of all I cannot see my daily iPhone XS on Airdrop page inside macOS nor see the this hack on that iPhone XS, but on my older iPhone 7 Airdrop works just fine on both directions. Moreover, after I enable Airdrop on that iPhone 7 I can see the iPhone XS on finder and vice versa.
The only difference between those two iPhones is that my old 7 is settled with US locale while the new XS is settled in Italian.
I read somewhere that some BCM cards have problem with the right region code, but this model isn't mentioned. Anyone uses this card?
Also I found out that if I get a call on my iPhone and answer via this Hackintosh (just like I usually do on my MacBook Pro), AppleALC will crash and system is restarted.
Here is the report:
Based on your report you're using macOS 11 Big Sur Public Beta 9. Do you have this same issue with previous BS release or Catalina?
Apple has made some important changes in this version of Big Sur ( HEVC stopped working, Wifi, Airdrop, Airplay connection that were ok are now buggy or non functional... ) ; It might just be related to this OS Version ( Still beta ).
Lastly, To avoid confusion it would be nice if people who do not use BS or this version of Big Sur ( on a Hack ) refrain from posting or answering. This is why we have other X299 threads.
- Under Nvram : -v darkwake=0 npci=0x2000 alcid=7 shikigva=80 : npci=0x2000 not need for Asus (F.E.) , alcid=7 : must be adjusted according to your system , you can add keepsyms=1 debug=0x100 to see/stop debug infos while booting
- Under PlatformInfo :generate your own SMBIOS : add MLB, SystemSerialNumber, iMacPro 1,1 or MacPro 7,1 if you prefer, add SystemUUID etc...
3 / replace USB.kext with yours
While booting at OC gui press the space bar if you want more boot options
the right number is 0.6.2
You have an ACPI patch ... is it required for all X299 mobo ?
You have 2 Kernel Patches ... that on is no linger needed (SSDtrim) and another specific (Aquatia 10G)
Thanks
I should be right, and using 255 for this usb port. I used Hackintool to generate ssdt-uiac and UsbInject.kext but I will switch to newer @Loloflatsix ‘s kext approach. In ssdt-uiac this port is mapped as 0xFF (255) but in hackintool is marked as USB2 port, not Internal. Is very strange and I would get rid of prebuilt things since is very difficult to debug iussues.
Meanwhile I also updated lilu and applealc and the problem is still there.
Based on your report you're using macOS 11 Big Sur Public Beta 9. Do you have this same issue with previous BS release or Catalina?
Apple has made some important changes in this version of Big Sur ( HEVC stopped working, Wifi, Airdrop, Airplay connection that were ok are now buggy or non functional... ) ; It might just be related to this OS Version ( Still beta ).
Lastly, To avoid confusion it would be nice if people who do not use BS or this version of Big Sur ( on a Hack ) refrain from posting or answering. This is why we have other X299 threads.
Yes, I’m on latest Developer Beta (should be the same as Public).
I did not know l, based on the latest page of this thread that this beta has that many iussue..
the right number is 0.6.2
You have an ACPI patch ... is it required for all X299 mobo ?
You have 2 Kernel Patches ... that on is no linger needed (SSDtrim) and another specific (Aquatia 10G)
Thanks
Yes, you're right. The ACPI pach seems right for Gigabyte or Asus : I can boot both with.
I keep the two kernel patches but for Aquantia 10G there is a change for Big Sur, see on this post : #24
to verify it.
The ACPI patch does a similar job to cover the RTC mapping of 0x0070 to 00x0078 ( Check your DSDT /Device RTC, to see if you need it ).
If you use the latest method for USB mapping you can get rid of the SSDT for USBX.
Attached is my EFI for Gigabyte WU-8. Version OC 0.6.3. Fully functional without any SSDTs.
To be replaced or adjusted:
-USBPorts.kext
-Device properties
-PlatformInfo.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.