Updated 2013-08-16: MacMan's Haswell Test Build: Core i7-4770K + GA-Z87X-UD5H

[fussel]

at the back of the pc: front, rear, center, mic

 

[jvangorkum]

at the back of the pc: front, rear, center, mic

Could be that I'm on F6. We're on the same rev (1.0) from what I can tell.

 

[fussel]

running Bios F7
http://www.gigabyte.de/products/product-page.aspx?pid=4483&dl=1#bios

 

[Stork]

This thread is for questions on MacMan's Haswell test build. Questions on other Haswell motherboards should be addressed in a new or another thread.

Questions on using Mountain Lion on Haswell motherboards and processors are allow so long as it's using the currently released OS X and not developer builds or other unreleased software. There are several Haswell based systems described in User Builds forum section.

 

[thewarlock97]

I have the same hardware and I have installed 10.8.5 using unibeast 2.1. I am using gtx 650 for my display. Once os x was installed, I ran multibeast and selected the audio driver and hknacs ethernet only. When I rebooted, I got the Apple logo and then a grey screen at which it gets stuck, it would not continue booting. Please tell me what to do.

 

[genzai]

I have the same hardware and I have installed 10.8.5 using unibeast 2.1. I am using gtx 650 for my display. Once os x was installed, I ran multibeast and selected the audio driver and hknacs ethernet only. When I rebooted, I got the Apple logo and then a grey screen at which it gets stuck, it would not continue booting. Please tell me what to do.

fakesmc dude...

g\

 

[saahil]

Same too u dude...

 

[freituk]

i bought GA-Z87X-UD3H

i have a very stable system right now running 10.8.5

The only thing strange is this log message.

The IOUSBFamily did not receive enough extra current for the SuperSpeed device (HubDevice) at 0x15600000, asked for 400mA but got 0 mA

The IOUSBFamily did not receive enough extra current for the SuperSpeed device (HubDevice) at 0x15500000, asked for 400mA but got 0 mA

I think they are one of the 2 USB 3.0 internal header (the one i never used) and the Hub is Renesas uPD720210
Its possible to fix this with hub firmware update like i saw in post about ​

GA-Z77X-UD5H usb 3 problem?

I love to talk with some one with same board

thanks

 

[P1LGRIM]

The only thing strange is this log message.

The IOUSBFamily did not receive enough extra current for the SuperSpeed device (HubDevice) at 0x15600000, asked for 400mA but got 0 mA

Take a look here : http://www.tonymacx86.com/general-help/82678-solved-usb-devices-requires-too-much-power-error-when-nothing-connected.html

Also, put 'The IOUSBFamily did not receive enough extra current' into the Search box at the top right of this page to see other related threads.

 

[freituk]

Take a look here : http://www.tonymacx86.com/general-h...-much-power-error-when-nothing-connected.html

Also, put 'The IOUSBFamily did not receive enough extra current' into the Search box at the top right of this page to see other related threads.

Thanks
Already saw all that posts about Z77X-UD5H USB problem, and tried "remove the power plug completely" trick.
I m confused because Z77X-UD5H use Hubs form VIA and seems firmware can be update and all the stuff i read on http://www.tonymacx86.com/mountain-...nside-ga-z77x-ud5h-usb3-problem-under-ml.html

This board now use Renesas Hubs, its possible to update firmware? or i need to wait for new bios? or i have faulty Board? This questions are tormenting me