UniBeast: Install OS X Mavericks on Any Supported Intel-based PC

[jnormen]

Have strange problem, installation went well. till I used MultiBeast.
First I installed the LAn driver apple relet... no connection. and USB error.
Than I installed the other Lan driver and suddenly after reboot I only reach a white screen direct after the apple.
I dont know what happend here if it was the second reboot or the driver.

I started my other old Mountain SSD (was disconnected) a backup I use, got it started ran multibeast 6.0 from that one build on my new installation, but no success... still the same problem. white screen where it usually gets black if other problems. tried to reinstall it from USB still same problem. Any clue what might have happened?

At the white screen (no mouse etc) the hard drive are working for a ling time, but nothing happens, in verbose mode it stopped about USBM info and a root devide time out message repeat it self each 10-20 sec... This is all I know

 

[itscience]

Article: UniBeast: Install OS X Mavericks on Any Supported Intel-based PC

I've created a bootable USB drive and I can boot to it but it hangs at the Chimera boot screen, which shows the USB drive and my SSD with ML installed. I can't choose and continue. I also can't seem to type in any boot flags.

Sounds like your keyboard isn't working. Try plugging the keyboard into a different usb port.

and/or set the USB KB bios setting to auto.

 

[jnormen]

Article: UniBeast: Install OS X Mavericks on Any Supported Intel-based PC

Have strange problem, installation went well. till I used MultiBeast.
First I installed the LAn driver apple relet... no connection. and USB error.
Than I installed the other Lan driver and suddenly after reboot I only reach a white screen direct after the apple.
I dont know what happend here if it was the second reboot or the driver.

I started my other old Mountain SSD (was disconnected) a backup I use, got it started ran multibeast 6.0 from that one build on my new installation, but no success... still the same problem. white screen where it usually gets black if other problems. tried to reinstall it from USB still same problem. Any clue what might have happened?

At the white screen (no mouse etc) the hard drive are working for a ling time, but nothing happens, in verbose mode it stopped about USBM info and a root devide time out message repeat it self each 10-20 sec... This is all I know

 

[draganche]

Article: UniBeast: Install OS X Mavericks on Any Supported Intel-based PC

Same problem!

I'm trying to install Mavericks on a GA-P55M-UD2 F11 with an Nvidia GeForce 9500 GT 512 MB card. After the apple logo appears, the screen goes black and the monitor is going to sleep. I tried the boot flags writing them as outlined above (with no "-" in front) and did not work

GraphicsEnabler=Yes PCIRootUID=1

Let me know if I'm doing something wrong.

 

[martyrdub]

Im having problems creating the USB, I've downloaded Mavericks and unibeast, followed the steps for formatting the drive, then chose mavericks 10.9 in the unibeast menu, and it gives me this message, any tips?

 

[Londonmark]

Article: UniBeast: Install OS X Mavericks on Any Supported Intel-based PC

What was the actual fix you found to get past your Mavericks installation just going black, flashing Apple logo and restarting machine? I have the same issue, tried booting with rd=uuid boot-uuid= (logical volume string) just stays at the Apple logo screen?

I'm having a similar problem. I get to the installer and it seems to install OK. At the end of the installation process, it reboots but doesn't get as bootloader screen (freezes with a forward slash on an otherwise blank screen), so I have to reboot. When I do that it shows my old Mountain Lion disk (that I am trying to install over the top of) with a an apple logo on it (white on black). Then after about 2 seconds of starting to boot into OSX, it crashes to a dark screen and restarts.

Any ideas? I've tried several times and it's getting very frustrating!

I never see a Tonymac Mavericks logo except on the USB drive when it goes to the installer.

 

[iry]

I tried also to delete network settings from library, reboot, same problem, iMessage error still there.

 

[DrFaust21]

Working like a charm, 1h to get it fully working.
Unibeast used from a VM on Windows then fresh install on a spare HDD.
Boot with graphicsenabler=yes.
Desactivate fast boot and windows 8 bios optimisations.
Easybeast postinstall with ethernet for realtek 8***
then chameleon wizard to edit smbios.plist get a fresh about my mac with a random serial.
I use an usb audiocard so no need to fix built in audio.
Triple screen 1080p handled right away.
I get only the screen attached to the Quadro working until reboot for multibeast.

Gigabyte Z68XP-UD3 UEFI bios U1J
Core i5 3570k (only OC was to set max multiplier to 38)
Nvidia ENGTX 560ti
Nvidia Quadro FX 3700
8Gb Corsair

A great thanks to you guys.

 

[Elite2k]

Gigabyte Z68MA-D2H-B3 Motherboard - UEFI BIOS version U1b
-16GB RAM
-Samsung 840 256 SSD
-Nvidia GT640 2GB
-Cheap chinese usb 2.0 bluetooth ebay
-retail apple airport card mod via pci

Machine works perfectly no boot flags DSDT FREE
Sound ALC889 + Sleep Wake all works

 

[Offo]

Article: UniBeast: Install OS X Mavericks on Any Supported Intel-based PC

Installed on a ga-z77-ds3h using UniBeast. Went very smoothly. Haven't noticed any issues yet, though I've only been running it for a couple of hours now.

Thank you very much for your message, i just have the same motherboard, rev. 1.0, does you install any additional kexts, using flags or bios settings? Adiitionally, what is your graphic card?