Contribute
Register

The 660 Ti Thread: Questions and Answers Here!

Status
Not open for further replies.
Build 1
GA-Z77X-UD5H |  i7 3770K |  GeForce GTX 660 Ti
The cake was a lie..... :(
 
What settings are you guys using on Unigen? I just scored 1814 but i left it at stock settings. you can see them below. I'll test it again at whatever settings you guys are using to get an idea of what it should be maybe.
thanks ;)
61d860510f1819f962099ba477cb3855.png
 
trza said:
What settings are you guys using on Unigen? I just scored 1814 but i left it at stock settings. you can see them below. I'll test it again at whatever settings you guys are using to get an idea of what it should be maybe.
thanks ;)
61d860510f1819f962099ba477cb3855.png
Click to expand...

That seems pretty reasonable, seeing that my 560 Ti gets: (Sorry, it's an html and it wouldn't load as an image)


FPS:
45.8
Scores:
1154
Min FPS:
23.0
Max FPS:
98.5
Hardware

Binary:
MacOS 64bit GCC 4.2.1 Release Mar 7 2012
Operating system:
Darwin 11.0.0 x86_64
CPU model:
Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
CPU flags:
3309MHz MMX SSE SSE2 SSE3 SSSE3 SSE41 SSE42 HTT
GPU model:
GeForce GTX 560 Ti 1024Mb
Settings

Render:
opengl
Mode:
1920x1080 8xAA fullscreen
Shaders:
high
Textures:
high
Filter: bilinear
Anisotropy: disabled
Occlusion:
enabled
Refraction:
enabled
Volumetric:
enabled
Tessellation: disabled​

And that's at 1920x1080 vs your 1600x1200
 
ElKanyeEast said:
That seems pretty reasonable, seeing that my 560 Ti gets: (Sorry, it's an html and it wouldn't load as an image)


FPS:
45.8
Scores:
1154
Min FPS:
23.0
Max FPS:
98.5
Hardware

Binary:
MacOS 64bit GCC 4.2.1 Release Mar 7 2012
Operating system:
Darwin 11.0.0 x86_64
CPU model:
Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
CPU flags:
3309MHz MMX SSE SSE2 SSE3 SSSE3 SSE41 SSE42 HTT
GPU model:
GeForce GTX 560 Ti 1024Mb
Settings

Render:
opengl
Mode:
1920x1080 8xAA fullscreen
Shaders:
high
Textures:
high
Filter: bilinear
Anisotropy: disabled
Occlusion:
enabled
Refraction:
enabled
Volumetric:
enabled
Tessellation: disabled​

And that's at 1920x1080 vs your 1600x1200
Click to expand...
Thanks for doing that for me, I reran with what I think are closer to what you ran it as and got some meh results..

Heaven Benchmark v3.0 Basic

FPS:
40.4
Scores:
1019
Min FPS:
19.7
Max FPS:
104.1
Hardware

Binary:
MacOS 64bit GCC 4.2.1 Release Mar 7 2012
Operating system:
Darwin 12.1.0 x86_64
CPU model:
Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
CPU flags:
3309MHz MMX SSE SSE2 SSE3 SSSE3 SSE41 SSE42 HTT
GPU model:
NVIDIA GeForce GTX 660 Ti 2048Mb
Settings

Render:
opengl
Mode:
1600x1200 8xAA fullscreen
Shaders:
high
Textures:
high
Filter:
trilinear
Anisotropy: disabled
Occlusion:
enabled
Refraction:
enabled
Volumetric:
enabled
Tessellation: disabled​

I also just came back upstairs to a totally frozen screen, stuck at 19:00 oclock. reminded me of fermi freeze when i had 560ti 2gb.

correct me if i did my stuff wrong but bascially

- I had this set up perfect (i think) with my HD300 onboard card

- Got my new card today, put it in, installed it, checked out windows, played bf3 works beautiful.

- booted to mac (different SSD) and got white screen. ok - i booted again with GraphicsEnabler=no

- Then i opened multibeast and installed the 670 680 690 driver along with the customization -> graphicsenabler=no and restarted then ran tests.

Should I have like.. REDONE all of the multibeast stuff from before? or is it like, once you do it its always done?

What about maybe changing my setup from mac mini to imac 12,1 or something? tbh im not sure what the profiles actually do for functionality.

Thank you so much for replies guys.
 
trza said:
Thanks for doing that for me, I reran with what I think are closer to what you ran it as and got some meh results..

Heaven Benchmark v3.0 Basic

FPS:
40.4
Scores:
1019
Min FPS:
19.7
Max FPS:
104.1
Hardware

Binary:
MacOS 64bit GCC 4.2.1 Release Mar 7 2012
Operating system:
Darwin 12.1.0 x86_64
CPU model:
Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
CPU flags:
3309MHz MMX SSE SSE2 SSE3 SSSE3 SSE41 SSE42 HTT
GPU model:
NVIDIA GeForce GTX 660 Ti 2048Mb
Settings

Render:
opengl
Mode:
1600x1200 8xAA fullscreen
Shaders:
high
Textures:
high
Filter:
trilinear
Anisotropy: disabled
Occlusion:
enabled
Refraction:
enabled
Volumetric:
enabled
Tessellation: disabled​

I also just came back upstairs to a totally frozen screen, stuck at 19:00 oclock. reminded me of fermi freeze when i had 560ti 2gb.

correct me if i did my stuff wrong but bascially

- I had this set up perfect (i think) with my HD300 onboard card

- Got my new card today, put it in, installed it, checked out windows, played bf3 works beautiful.

- booted to mac (different SSD) and got white screen. ok - i booted again with GraphicsEnabler=no

- Then i opened multibeast and installed the 670 680 690 driver along with the customization -> graphicsenabler=no and restarted then ran tests.

Should I have like.. REDONE all of the multibeast stuff from before? or is it like, once you do it its always done?

What about maybe changing my setup from mac mini to imac 12,1 or something? tbh im not sure what the profiles actually do for functionality.

Thank you so much for replies guys.
Click to expand...

I got a little confused towards the end. Did the card work after setting graphicsenabler=no? Because that's a 600 Card thing that I don't believe is fixed yet, though I may be wrong
 
When I manually set the GraphicsEnabler=no, it worked enough for me to boot up.
I booted up and then ran multibeast for mountain lion and ran those two options
- NVIDIA GTX 670/680/690 GeforceGL
- Customize->Boot Options->GraphicsEnabler=No

Now like i said it's booting up just fine but that score is a bit bad and every time it wakes out of sleep it is totally locked up at the time of sleep (clock is frozen too, no mouse no nothing)
 
trza said:
When I manually set the GraphicsEnabler=no, it worked enough for me to boot up.
I booted up and then ran multibeast for mountain lion and ran those two options
- NVIDIA GTX 670/680/690 GeforceGL
- Customize->Boot Options->GraphicsEnabler=No

Now like i said it's booting up just fine but that score is a bit bad and every time it wakes out of sleep it is totally locked up at the time of sleep (clock is frozen too, no mouse no nothing)
Click to expand...

That's expected because of GraphicsEnabler=no, so with that yo won't get as good scores as the card can achieve (yet). The locked up issue, no idea what to say. It may be a graphical issue with the 660 Ti, not sure.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top