[Success] i7-8700K | Gigabyte Z370N WIFI | EVGA 1060 SC 6GB | High Sierra

[DouggieB2]

I used another Hackintosh

 

[DouggieB2]

All went well, seemed very stable. I ran MultiBeast and the LAN & USB's came on line. No audio yet. I stopped and downloaded the latest Security Update from Apple (not the iTunes bit), and now it keeps rebooting. I was expecting 3-5 reboots but it just keeps on going. I must have missed something.

 

[DouggieB2]

It's The Apple 2.5Gb Update that is causing me problems. Gets stuck in reboot loop.

 

[DouggieB2]

Adding a Gigabyte Radeon RX560 4Gb, and dialling the Onboard GPU halts boot-up.
What Radeon should I buy for use with Final Cut Pro X? Just want to slot in and go. My older Hack uses a Vapour-X Radeon R9 280X 3Gb and that was slot in a go and is very stable.

 

[DouggieB2]

How do I remove the unwanted icons in the BootManager. I just want send fro the left & recovery. The rest are 'dead-ends'.

 

[Smallek]

What you have Chosen in the MultiBeast for post installation settings...
Audio Which Drivers?
Disk?
Misc?
Network?

I ask as I have a very similar Setup like you, and my Ethernet and Audio don't work.

 

[DouggieB2]

Audio: 100/2000 /300 Series Audio Support + ALC1220 + 300 Patch first. The MultiBeast notes tells you to reboot then add the ALC1220.
LAN: IntelMausiEthernet v 2.3.0 ( only got one going because that is all I need but stork has Kindly described how to get both ports working simultaneously.

USB: Increase Max Port Limit 200 series also worked for me

 

[b.kind]

What you have Chosen in the MultiBeast for post installation settings...
Audio Which Drivers?
Disk?
Misc?
Network?

I ask as I have a very similar Setup like you, and my Ethernet and Audio don't work.

Check out my build, in the sig. Everything works.
Most of it is straight forward, but USB and Audio both required a fair amount of configuration.

 

[Smallek]

Ok Success

-Gigabyte z370n
-I7 8700k
-Radeon Sapphire 580 nitro+
-Ballistik Sport 2X 16gb 2400mhz ddr 4ram
-Phantom micro Axt Gehäuse Nvidia Force GTI Edition
-Corsair H60 Water Cooler
-M2 970evo 500Gb

UniBeast 9.0.0 Mojave no update from high Sierra

MultiBeast 10.4.0 for High Sierra

post install

Quick start: UEFI BOOT MODE
Audio: no audio driver (but I don't need it necessary)
Disk tab: Nothing under Disk tab is it good to enable intel Generic AHCI SATA?
Misc : Fake SMC what do they other odes mean?
Network: Intel Mausi Ethernet v2.3.0. only one port Is working.
USB: Nothing But every from my 9 USB ports are working the usb C included
Boot Loaders: Clover UEFI Booth mode
Graphic Configuration: Nothing But the Graphiccard doesn't need an Driver
SSDT Options : Nothing But I don't know what it means and what good to chose?
System Def. : iMAC 14,2 But nearly everyone uses for this Config.

My Last Questions are

Is it good to enable Intel Generic AHCI SATA or something other under Disk tab?
Is another Misc Setting Better ?
What to chose under SSDT options ?
and How to reach the Clockspeed of 4,7GHz turbo How to enable it?

Thanks for the answers.

 

[aforty]

Nice build, I'm considering many of the same parts. Have you tested bluetooth since you got it, can you confirm if Apple's "Hand-Off" feature works?