- Joined
- Jan 6, 2011
- Messages
- 13
- Motherboard
- Aorus Master Z490
- CPU
- i9-10900K
- Graphics
- RX 580
- Mac
- Mobile Phone
[Success!] Core i7-4790k - GA-Z97X-UD5H - 32GB Crucial Balistix Tactical - EVGA GTX 750 TI
Intel Core i7-4790K
http://www.amazon.es/dp/B00KPRWAX8/?tag=tonymacx86c03-21
Gigabyte GA-Z97X-UD5H
http://www.amazon.es/dp/B00K9R1KLW/?tag=tonymacx86c03-21
32GB Crucial Balistix Tactical 16 GB - Memoria RAM (Kit 2 x 8 GB, 240 pin DIMM, DDR 3 1600, NON-ECC)
http://www.amazon.es/gp/product/B007J0BHZQ/?tag=tonymacx86c03-21
Corsair CX750M
http://www.amazon.es/dp/B00ALK1TPE/?tag=tonymacx86c03-21
EVGA GEFORCE GTX 750i
http://www.amazon.es/dp/B00IGQ4ZHY/?tag=tonymacx86c03-21
Crucial MX100 256 GB SSD
http://www.amazon.es/dp/B00RQA6DTE/?tag=tonymacx86c03-21
LG BD-RW WH14NS40
http://www.amazon.es/dp/B00E960MS6/?tag=tonymacx86c03-21
Installation of OS X Using UniBeast & Clover
I was able to install Clover via the great TonyMacx86 method outlined on this page with some minor changes to the steps for my particular hardware.
Follow the directions in the link above to STEP 4:
STEP 5: Post - Installation
1. Download the latest version of CLOVER Sourceforge
2. Install Clover El Capitan with the following custom settings:
Important: These steps are performed on the SSD installation not USB.
Copy to End the Kext necessary:
Navigate to Volumes / EFI / CLOVER / and replace default config.plist with attached config.plist*
Navigate to Volumes / EFI / EFI / CLOVER / Driver64UEFI / and add with attached HFSPlus.efi*
Navigate to Volumes / EFI / CLOVER / kexts / 10.11 / and add FakeSMC.kext*
Navigate to Volumes / EFI / CLOVER / kexts / 10.11 / and add your Ethernet kext*
If a 'Maxwell' NVIDIA GeForce GTX 750, 750 Ti, 950, 960, 970, 980, 980 Ti graphics card or TITAN X, OS X graphics drivers are not supported natively used.
Drivers NVIDIA Alternate NVIDIA Graphics Drivers
Audio ALC1150 injection method of Toleda*
Run File "audio_cloverALC-110_v1.0l" and give yes to everything.
I have provided config.plist files. Work 100%
[video=youtube;9y6kyPfyMZM]https://www.youtube.com/watch?v=9y6kyPfyMZM[/video]
Youtube video is in Spanish since I am Spanish, forgive my English.
Additional Photos BIOS Z97x-UD5H
UEFI Settings
Thanks tonymacx86
Greetings
@By Fory360
Intel Core i7-4790K
http://www.amazon.es/dp/B00KPRWAX8/?tag=tonymacx86c03-21
Gigabyte GA-Z97X-UD5H
http://www.amazon.es/dp/B00K9R1KLW/?tag=tonymacx86c03-21
32GB Crucial Balistix Tactical 16 GB - Memoria RAM (Kit 2 x 8 GB, 240 pin DIMM, DDR 3 1600, NON-ECC)
http://www.amazon.es/gp/product/B007J0BHZQ/?tag=tonymacx86c03-21
Corsair CX750M
http://www.amazon.es/dp/B00ALK1TPE/?tag=tonymacx86c03-21
EVGA GEFORCE GTX 750i
http://www.amazon.es/dp/B00IGQ4ZHY/?tag=tonymacx86c03-21
Crucial MX100 256 GB SSD
http://www.amazon.es/dp/B00RQA6DTE/?tag=tonymacx86c03-21
LG BD-RW WH14NS40
http://www.amazon.es/dp/B00E960MS6/?tag=tonymacx86c03-21
Installation of OS X Using UniBeast & Clover
I was able to install Clover via the great TonyMacx86 method outlined on this page with some minor changes to the steps for my particular hardware.
Follow the directions in the link above to STEP 4:
STEP 5: Post - Installation
1. Download the latest version of CLOVER Sourceforge
2. Install Clover El Capitan with the following custom settings:
Important: These steps are performed on the SSD installation not USB.
Copy to End the Kext necessary:
Navigate to Volumes / EFI / CLOVER / and replace default config.plist with attached config.plist*
Navigate to Volumes / EFI / EFI / CLOVER / Driver64UEFI / and add with attached HFSPlus.efi*
Navigate to Volumes / EFI / CLOVER / kexts / 10.11 / and add FakeSMC.kext*
Navigate to Volumes / EFI / CLOVER / kexts / 10.11 / and add your Ethernet kext*
If a 'Maxwell' NVIDIA GeForce GTX 750, 750 Ti, 950, 960, 970, 980, 980 Ti graphics card or TITAN X, OS X graphics drivers are not supported natively used.
Drivers NVIDIA Alternate NVIDIA Graphics Drivers
Audio ALC1150 injection method of Toleda*
Run File "audio_cloverALC-110_v1.0l" and give yes to everything.
I have provided config.plist files. Work 100%
[video=youtube;9y6kyPfyMZM]https://www.youtube.com/watch?v=9y6kyPfyMZM[/video]
Youtube video is in Spanish since I am Spanish, forgive my English.
Additional Photos BIOS Z97x-UD5H
UEFI Settings
Thanks tonymacx86
Greetings
@By Fory360