- Joined
- Jul 16, 2020
- Messages
- 14
- Motherboard
- Gigabyte GA-Z170X-UD5-TH
- CPU
- i7 6700K
- Graphics
- GTX 780
You are absolutely incredible, thank you so much.There are 4 files in the attached ZIP:
The first two are Thunderbolt firmware files:
- GA-X170Z-UD5-TH-CASEYSJ-MOD1.bin
- GA-X170Z-UD5-TH-CASEYSJ-MOD2.bin
- SSDT-TB3HP-GA-X170Z-UD5-TH.aml
- SSDT-DTPG.aml
Use files 3 and 4 with all tests:
- Please flash MOD1 first and run a battery of tests.
- Then try MOD2 to see if it's any better.
- File 3 is a Thunderbolt hot-plug SSDT with custom DROM for your motherboard.
- IMPORTANT: Need to modify this file to use the correct PCI paths. If in doubt, please post the Thunderbolt SSDT you're using now and I'll make the changes for you.
- File 4 is a helper SSDT needed by File 3.
I will do exactly as instructed when I'm back in the studio on Monday.
Regarding the SSDT, I've been using this one you posted (attached). Not sure it's necessarily the best for my system but it's the one you posted for my board and it gave me thunderbolt bus.
By correct PCI paths I think you mean RP05, shown by my IOREG images. Is that correct?