Contribute
Register

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

I have mismatched memory modules! by the way. @CaseySJ I followed all the steps in your post and issues remain. But I have mismatched memory pairs. @madmax559 thanks for your advise. I try to buy a paired memory modules
Please let us know if the WiFi/Ethernet problem gets fixed with matched memory. This is the first such problem report.
 
Some questions / comments:
  • Is this Ventura 13.4?
  • Are you using Fenvi FV-T919? I ask because log shows "BlueTool" and "airportd"
  • Please post EFI folder with serial numbers removed
Thanks for your reply. Not using Fenvi.
No. Monterey -> trying to do a fresh install.
EFI attached.

Appreciate your help.
 

Attachments

  • EFI.zip
    46.8 MB · Views: 22
Thanks for your reply. Not using Fenvi.
No. Monterey -> trying to do a fresh install.
EFI attached.

Appreciate your help.
Please try these 3 suggestions:
Screenshot 2023-05-20 at 1.04.29 PM.png
Screenshot 2023-05-20 at 1.04.57 PM.png
Screenshot 2023-05-20 at 1.05.30 PM.png
 
Thanks for the suggestions. I get stuck in the same place, bluetool & airportd flushed logs and stuck.
Weird. Worked for 4 years, now all this trouble.
BlueToolFixup is disabled so I wonder where that is coming from. Are you booting from the right disk?
 
Just checked. Yes. I'll check my config with BBEdit next.
Looks like BlueTool is not the same as BlueToolFixup. My mistake. The former comes from macOS itself.
 
On closer inspection, my config.plist looks OK.

But it doesn't boot, stuck at findmymacd, locationd, trustdfilehelper.
Couple more questions:
  • Which version of BIOS is installed?
  • Is there only one GPU? Is it RX580 or Vega or something else?
 
Back
Top