[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

CaseySJ · Jan 31, 2020

Elias64Fr said:
Right ! Frozen Boot would be more sure

Results of Test 1: Cold Boot with No Devices Attached.

Code:

kernel: (kernel) ACPIDebug: Version 0.1.4 starting on OS X Darwin 19.3.
kernel: (kernel) ACPIDebug: 0x54039854
kernel: (kernel) ACPIDebug: 0xe00e4000
kernel: (kernel) ACPIDebug: 0xe0600000
kernel: (kernel) ACPIDebug: 0xe0700000
kernel: (kernel) ACPIDebug: 0xe0708000
kernel: (kernel) ACPIDebug: 0xe0710000
kernel: (kernel) ACPIDebug: 0xe0720000
kernel: (kernel) ACPIDebug: 0xe0800000
kernel: (kernel) ACPIDebug: "_INI Root Port"
kernel: (kernel) ACPIDebug: "RP18 =0000000000000000"
kernel: (kernel) ACPIDebug: "RP19 =0000000000000006"
kernel: (kernel) ACPIDebug: "RP1A =0000000000000070"
kernel: (kernel) ACPIDebug: "RP1C =00000000000000F0"
kernel: (kernel) ACPIDebug: "R_20 =0000000082005400"
kernel: (kernel) ACPIDebug: "R_24 =0000000049F10001"
kernel: (kernel) ACPIDebug: "R_28 =0000000000000060"
kernel: (kernel) ACPIDebug: "R_2C =0000000000000060"
kernel: (kernel) ACPIDebug: "UP18 =00000000000000FF"
kernel: (kernel) ACPIDebug: "UP19 =00000000000000FF"
kernel: (kernel) ACPIDebug: "UP1A =00000000000000FF"
kernel: (kernel) ACPIDebug: "UP1C =000000000000FFFF"
kernel: (kernel) ACPIDebug: "UP20 =00000000FFFFFFFF"
kernel: (kernel) ACPIDebug: "UP24 =00000000FFFFFFFF"
kernel: (kernel) ACPIDebug: "UP28 =00000000FFFFFFFF"
kernel: (kernel) ACPIDebug: "UP2C =00000000FFFFFFFF"
kernel: (kernel) ACPIDebug: "DP18 =00000000000000FF"
kernel: (kernel) ACPIDebug: "DP19 =00000000000000FF"
kernel: (kernel) ACPIDebug: "DP1A =00000000000000FF"
kernel: (kernel) ACPIDebug: "DP1C =000000000000FFFF"
kernel: (kernel) ACPIDebug: "DP20 =00000000FFFFFFFF"
kernel: (kernel) ACPIDebug: "DP24 =00000000FFFFFFFF"
kernel: (kernel) ACPIDebug: "DP28 =00000000FFFFFFFF"
kernel: (kernel) ACPIDebug: "DP2C =00000000FFFFFFFF"
kernel: (kernel) ACPIDebug: "D418 =00000000000000FF"
kernel: (kernel) ACPIDebug: "D419 =00000000000000FF"
kernel: (kernel) ACPIDebug: "D41A =00000000000000FF"
kernel: (kernel) ACPIDebug: "D420 =00000000FFFFFFFF"
kernel: (kernel) ACPIDebug: "D424 =00000000FFFFFFFF"
kernel: (kernel) ACPIDebug: "D428 =00000000FFFFFFFF"
kernel: (kernel) ACPIDebug: "D42C =00000000FFFFFFFF"
kernel: (kernel) ACPIDebug: "NH10 =00000000FFFFFFFF"
kernel: (kernel) ACPIDebug: "NH14 =00000000FFFFFFFF"
kernel: (kernel) ACPIDebug: "ICMBoot"
kernel: (kernel) ACPIDebug: "Tbt TWIN set to One"
kernel: (kernel) ACPIDebug: "Tbt Force Power with FPG0"
kernel: (kernel) ACPIDebug: "Up Stream VID/DID =0000000015EA8086"
kernel: (kernel) ACPIDebug: "ICMS"
kernel: (kernel) ACPIDebug: "ICME_0="
kernel: (kernel) ACPIDebug: 0xffffffff
kernel: (kernel) ACPIDebug: "Configure NHI called"
kernel: (kernel) ACPIDebug: "Configure NHI RP OK!"
kernel: (kernel) ACPIDebug: "Configure NHI UPSB OK!"
kernel: (kernel) ACPIDebug: "Configure NHI Dp 0 done"
kernel: (kernel) ACPIDebug: "Configure NHI Dp 3 done"
kernel: (kernel) ACPIDebug: "Configure NHI Dp 4 done"
kernel: (kernel) ACPIDebug: "Configure NHI Dp 5 done"
kernel: (kernel) ACPIDebug: "Configure NHI DPs done"
kernel: (kernel) ACPIDebug: "Configure NHI0 all done"
kernel: (kernel) ACPIDebug: "Configure NHI End"
kernel: (kernel) ACPIDebug: "ICME_1="
kernel: (kernel) ACPIDebug: 0x800001a1
kernel: (kernel) ACPIDebug: "ICME_2="
kernel: (kernel) ACPIDebug: 0x800001a1
kernel: (kernel) ACPIDebug: "ICME_3="
kernel: (kernel) ACPIDebug: 0x800001a7
kernel: (kernel) ACPIDebug: 0x800003f5
kernel: (kernel) ACPIDebug: "ICME_4="
kernel: (kernel) ACPIDebug: 0x800001a7
kernel: (kernel) ACPIDebug: "ISTA="
kernel: (kernel) ACPIDebug: 0x800003f5
kernel: (kernel) ACPIDebug: "Configuration delay = 1004 ms"
kernel: (kernel) ACPIDebug: "RP18 =0000000000000000"
kernel: (kernel) ACPIDebug: "RP19 =0000000000000006"
kernel: (kernel) ACPIDebug: "RP1A =0000000000000070"
kernel: (kernel) ACPIDebug: "RP1C =00000000000000F0"
kernel: (kernel) ACPIDebug: "R_20 =0000000082005400"
kernel: (kernel) ACPIDebug: "R_24 =0000000049F10001"
kernel: (kernel) ACPIDebug: "R_28 =0000000000000000"
kernel: (kernel) ACPIDebug: "R_2C =0000000000000000"
kernel: (kernel) ACPIDebug: "UP18 =0000000000000006"
kernel: (kernel) ACPIDebug: "UP19 =0000000000000007"
kernel: (kernel) ACPIDebug: "UP1A =0000000000000070"
kernel: (kernel) ACPIDebug: "UP1C =00000000000001F1"
kernel: (kernel) ACPIDebug: "UP20 =0000000082005400"
kernel: (kernel) ACPIDebug: "UP24 =0000000049F10001"
kernel: (kernel) ACPIDebug: "UP28 =0000000000000000"
kernel: (kernel) ACPIDebug: "UP2C =0000000000000000"
kernel: (kernel) ACPIDebug: "DP18 =0000000000000007"
kernel: (kernel) ACPIDebug: "DP19 =0000000000000008"
kernel: (kernel) ACPIDebug: "DP1A =0000000000000070"
kernel: (kernel) ACPIDebug: "DP1C =00000000000001F1"
kernel: (kernel) ACPIDebug: "DP20 =0000000082005400"
kernel: (kernel) ACPIDebug: "DP24 =0000000049F10001"
kernel: (kernel) ACPIDebug: "DP28 =0000000000000000"
kernel: (kernel) ACPIDebug: "DP2C =0000000000000000"
kernel: (kernel) ACPIDebug: "D418 =0000000000000007"
kernel: (kernel) ACPIDebug: "D419 =000000000000000A"
kernel: (kernel) ACPIDebug: "D41A =000000000000000A"
kernel: (kernel) ACPIDebug: "D420 =0000000000000000"
kernel: (kernel) ACPIDebug: "D424 =0000000000010001"
kernel: (kernel) ACPIDebug: "D428 =0000000000000000"
kernel: (kernel) ACPIDebug: "D42C =0000000000000000"
kernel: (kernel) ACPIDebug: "NH10 =0000000054000000"
kernel: (kernel) ACPIDebug: "NH14 =0000000000000000"
kernel: (kernel) ACPIDebug: "RTPC NHI0 called with arg: 0000000000000000"
kernel: (kernel) ACPIDebug: "_PS3 NHI0, Nothing to do!"
kernel: (kernel) ACPIDebug: "_PS3 DSB0"
kernel: (kernel) ACPIDebug: "PCDA DSB0"
kernel: (kernel) ACPIDebug: "POFF DSB0"
kernel: (kernel) ACPIDebug: "PCDA DSB0- Put upstream bridge into D3"
kernel: (kernel) ACPIDebug: "PCDA DSB0- Set link disable on upstream bridge"
kernel: (kernel) ACPIDebug: "PCDA DSB0- Wait for link to drop..."
kernel: (kernel) ACPIDebug: "PCDA DSB0- disable GPIO"
kernel: (kernel) ACPIDebug: "UGIO - PCI wants on"
kernel: (kernel) ACPIDebug: "UGIO - NHI wants off"
kernel: (kernel) ACPIDebug: "UGIO - XHCI wants on"
kernel: (kernel) ACPIDebug: "UGIO - TBT allows off"
kernel: (kernel) ACPIDebug: "UGIO - USB forced on"
kernel: (kernel) ACPIDebug: "UGIO - TBT GPIO should be off"
kernel: (kernel) ACPIDebug: "UGIO - USB GPIO should be on"
kernel: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is on"

Results of Test 2: Cold Boot with TB3 Device Connected

Code:

kernel: (kernel) ACPIDebug: Version 0.1.4 starting on OS X Darwin 19.3.
kernel: (kernel) ACPIDebug: 0x54039854
kernel: (kernel) ACPIDebug: 0xe00e4000
kernel: (kernel) ACPIDebug: 0xe0600000
kernel: (kernel) ACPIDebug: 0xe0700000
kernel: (kernel) ACPIDebug: 0xe0708000
kernel: (kernel) ACPIDebug: 0xe0710000
kernel: (kernel) ACPIDebug: 0xe0720000
kernel: (kernel) ACPIDebug: 0xe0800000
kernel: (kernel) ACPIDebug: "_INI Root Port"
kernel: (kernel) ACPIDebug: "RP18 =0000000000000000"
kernel: (kernel) ACPIDebug: "RP19 =0000000000000006"
kernel: (kernel) ACPIDebug: "RP1A =0000000000000070"
kernel: (kernel) ACPIDebug: "RP1C =00000000000000F0"
kernel: (kernel) ACPIDebug: "R_20 =0000000082005400"
kernel: (kernel) ACPIDebug: "R_24 =0000000049F10001"
kernel: (kernel) ACPIDebug: "R_28 =0000000000000060"
kernel: (kernel) ACPIDebug: "R_2C =0000000000000060"
kernel: (kernel) ACPIDebug: "UP18 =0000000000000006"
kernel: (kernel) ACPIDebug: "UP19 =0000000000000007"
kernel: (kernel) ACPIDebug: "UP1A =0000000000000070"
kernel: (kernel) ACPIDebug: "UP1C =00000000000001F1"
kernel: (kernel) ACPIDebug: "UP20 =0000000082005400"
kernel: (kernel) ACPIDebug: "UP24 =0000000049F10001"
kernel: (kernel) ACPIDebug: "UP28 =0000000000000060"
kernel: (kernel) ACPIDebug: "UP2C =0000000000000060"
kernel: (kernel) ACPIDebug: "DP18 =0000000000000007"
kernel: (kernel) ACPIDebug: "DP19 =0000000000000008"
kernel: (kernel) ACPIDebug: "DP1A =0000000000000008"
kernel: (kernel) ACPIDebug: "DP1C =00000000000001F1"
kernel: (kernel) ACPIDebug: "DP20 =0000000082008200"
kernel: (kernel) ACPIDebug: "DP24 =000000000001FFF1"
kernel: (kernel) ACPIDebug: "DP28 =0000000000000000"
kernel: (kernel) ACPIDebug: "DP2C =0000000000000000"
kernel: (kernel) ACPIDebug: "D418 =0000000000000007"
kernel: (kernel) ACPIDebug: "D419 =000000000000003C"
kernel: (kernel) ACPIDebug: "D41A =000000000000003C"
kernel: (kernel) ACPIDebug: "D420 =000000006BF06BF0"
kernel: (kernel) ACPIDebug: "D424 =000000000001FFF1"
kernel: (kernel) ACPIDebug: "D428 =0000000000000000"
kernel: (kernel) ACPIDebug: "D42C =0000000000000000"
kernel: (kernel) ACPIDebug: "NH10 =0000000082000000"
kernel: (kernel) ACPIDebug: "NH14 =0000000082040000"
kernel: (kernel) ACPIDebug: "ICMBoot"
kernel: (kernel) ACPIDebug: "Tbt TWIN set to One"
kernel: (kernel) ACPIDebug: "Tbt Force Power with FPG0"
kernel: (kernel) ACPIDebug: "Up Stream VID/DID =0000000015EA8086"
kernel: (kernel) ACPIDebug: "ICMS"
kernel: (kernel) ACPIDebug: "ICME_0="
kernel: (kernel) ACPIDebug: 0xffffffff
kernel: (kernel) ACPIDebug: "Configure NHI called"
kernel: (kernel) ACPIDebug: "Configure NHI RP OK!"
kernel: (kernel) ACPIDebug: "Configure NHI UPSB OK!"
kernel: (kernel) ACPIDebug: "Configure NHI Dp 0 done"
kernel: (kernel) ACPIDebug: "Configure NHI Dp 3 done"
kernel: (kernel) ACPIDebug: "Configure NHI Dp 4 done"
kernel: (kernel) ACPIDebug: "Configure NHI Dp 5 done"
kernel: (kernel) ACPIDebug: "Configure NHI DPs done"
kernel: (kernel) ACPIDebug: "Configure NHI0 all done"
kernel: (kernel) ACPIDebug: "Configure NHI End"
kernel: (kernel) ACPIDebug: "ICME_1="
kernel: (kernel) ACPIDebug: 0x800001a1
kernel: (kernel) ACPIDebug: "ICME_2="
kernel: (kernel) ACPIDebug: 0x800001a1
kernel: (kernel) ACPIDebug: "ICME_3="
kernel: (kernel) ACPIDebug: 0x800001a7
kernel: (kernel) ACPIDebug: 0x800003f0
kernel: (kernel) ACPIDebug: "ICME_4="
kernel: (kernel) ACPIDebug: 0x800001a7
kernel: (kernel) ACPIDebug: "ISTA="
kernel: (kernel) ACPIDebug: 0x800003f0
kernel: (kernel) ACPIDebug: "Configuration delay = 1004 ms"
kernel: (kernel) ACPIDebug: "RP18 =0000000000000000"
kernel: (kernel) ACPIDebug: "RP19 =0000000000000006"
kernel: (kernel) ACPIDebug: "RP1A =0000000000000070"
kernel: (kernel) ACPIDebug: "RP1C =00000000000000F0"
kernel: (kernel) ACPIDebug: "R_20 =0000000082005400"
kernel: (kernel) ACPIDebug: "R_24 =0000000049F10001"
kernel: (kernel) ACPIDebug: "R_28 =0000000000000000"
kernel: (kernel) ACPIDebug: "R_2C =0000000000000000"
kernel: (kernel) ACPIDebug: "UP18 =0000000000000006"
kernel: (kernel) ACPIDebug: "UP19 =0000000000000007"
kernel: (kernel) ACPIDebug: "UP1A =0000000000000070"
kernel: (kernel) ACPIDebug: "UP1C =00000000000001F1"
kernel: (kernel) ACPIDebug: "UP20 =0000000082005400"
kernel: (kernel) ACPIDebug: "UP24 =0000000049F10001"
kernel: (kernel) ACPIDebug: "UP28 =0000000000000000"
kernel: (kernel) ACPIDebug: "UP2C =0000000000000000"
kernel: (kernel) ACPIDebug: "DP18 =0000000000000007"
kernel: (kernel) ACPIDebug: "DP19 =0000000000000008"
kernel: (kernel) ACPIDebug: "DP1A =0000000000000070"
kernel: (kernel) ACPIDebug: "DP1C =00000000000001F1"
kernel: (kernel) ACPIDebug: "DP20 =0000000082005400"
kernel: (kernel) ACPIDebug: "DP24 =0000000049F10001"
kernel: (kernel) ACPIDebug: "DP28 =0000000000000000"
kernel: (kernel) ACPIDebug: "DP2C =0000000000000000"
kernel: (kernel) ACPIDebug: "D418 =0000000000000007"
kernel: (kernel) ACPIDebug: "D419 =000000000000000A"
kernel: (kernel) ACPIDebug: "D41A =000000000000000A"
kernel: (kernel) ACPIDebug: "D420 =0000000000000000"
kernel: (kernel) ACPIDebug: "D424 =0000000000010001"
kernel: (kernel) ACPIDebug: "D428 =0000000000000000"
kernel: (kernel) ACPIDebug: "D42C =0000000000000000"
kernel: (kernel) ACPIDebug: "NH10 =0000000054000000"
kernel: (kernel) ACPIDebug: "NH14 =0000000000000000"
kernel: (kernel) ACPIDebug: "RTPC NHI0 called with arg: 0000000000000000"
kernel: (kernel) ACPIDebug: "_PS3 NHI0, Nothing to do!"
kernel: (kernel) ACPIDebug: "_PS3 DSB0"
kernel: (kernel) ACPIDebug: "PCDA DSB0"
kernel: (kernel) ACPIDebug: "POFF DSB0"
kernel: (kernel) ACPIDebug: "PCDA DSB0- Put upstream bridge into D3"
kernel: (kernel) ACPIDebug: "PCDA DSB0- Set link disable on upstream bridge"
kernel: (kernel) ACPIDebug: "PCDA DSB0- Wait for link to drop..."
kernel: (kernel) ACPIDebug: "PCDA DSB0 - NHI0 not present"
kernel: (kernel) ACPIDebug: "PCDA DSB0- disable GPIO"
kernel: (kernel) ACPIDebug: "UGIO - PCI wants on"
kernel: (kernel) ACPIDebug: "UGIO - NHI wants off"
kernel: (kernel) ACPIDebug: "UGIO - XHCI wants on"
kernel: (kernel) ACPIDebug: "UGIO - TBT allows off"
kernel: (kernel) ACPIDebug: "UGIO - USB forced on"
kernel: (kernel) ACPIDebug: "UGIO - TBT GPIO should be off"
kernel: (kernel) ACPIDebug: "UGIO - USB GPIO should be on"
kernel: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is on"

Results of Test 3:

This test produces Thunderbolt Local Node and Thunderbolt Bus in IOReg.
It is achieved by:
- Warm boot with TB3 device connected.
- Then hot-unplug the device -- and this causes system hang.
- Then plug the TB3 device back in.
- Press physical Reset button to reboot the system.
- Login to macOS.
- Now Thunderbolt Local Node and Thunderbolt Bus will appear in IOReg, ~~but system will freeze after 5-10 seconds.~~ Update 1: System does not freeze after removing NHI device properties from Clover:
  - ThunderboltConfig
  - ThunderboltDROM
  - Pathcr
- Update 2: Nevermind about removing ThunderboltConfig/ThunderboltDROM. Seems the two of these are needed.
- Thunderbolt Bus shows a more reasonable UID, and TB3 device finally has drivers loaded. The device is not operational, but this again is progress.
- The previous screenshots looked like this:
The log below is from the run with TNODE and TBUS, followed by another physical Reset and ACPI log after the reset.
We can see again that when TNODE/TBUS appear, MUST is called.
But in the next reboot (when TNODE/TBUS do not appear), MUST is not called.

Code:

2020-01-31 18:26:40.811253-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: Version 0.1.4 starting on OS X Darwin 19.3.
2020-01-31 18:26:40.811399-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x54039854
2020-01-31 18:26:40.811494-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xe00e4000
2020-01-31 18:26:40.811592-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xe0600000
2020-01-31 18:26:40.811654-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xe0700000
2020-01-31 18:26:40.811715-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xe0708000
2020-01-31 18:26:40.811774-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xe0710000
2020-01-31 18:26:40.811834-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xe0720000
2020-01-31 18:26:40.811899-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xe0800000
2020-01-31 18:26:40.811969-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_INI Root Port"
2020-01-31 18:26:40.812033-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP18 =0000000000000000"
2020-01-31 18:26:40.812094-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP19 =0000000000000006"
2020-01-31 18:26:40.812154-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP1A =0000000000000070"
2020-01-31 18:26:40.812215-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP1C =00000000000000F0"
2020-01-31 18:26:40.812275-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_20 =0000000082005400"
2020-01-31 18:26:40.812338-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_24 =0000000049F10001"
2020-01-31 18:26:40.812398-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_28 =0000000000000060"
2020-01-31 18:26:40.812459-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_2C =0000000000000060"
2020-01-31 18:26:40.812520-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP18 =0000000000000006"
2020-01-31 18:26:40.812580-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP19 =0000000000000007"
2020-01-31 18:26:40.812640-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP1A =0000000000000070"
2020-01-31 18:26:40.812699-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP1C =00000000000001F1"
2020-01-31 18:26:40.812927-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP20 =0000000082005400"
2020-01-31 18:26:40.812987-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP24 =0000000049F10001"
2020-01-31 18:26:40.813047-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP28 =0000000000000060"
2020-01-31 18:26:40.813107-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP2C =0000000000000060"
2020-01-31 18:26:40.813167-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP18 =0000000000000007"
2020-01-31 18:26:40.813227-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP19 =0000000000000008"
2020-01-31 18:26:40.813287-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP1A =0000000000000008"
2020-01-31 18:26:40.813492-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP1C =00000000000001F1"
2020-01-31 18:26:40.813552-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP20 =0000000082008200"
2020-01-31 18:26:40.813612-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP24 =000000000001FFF1"
2020-01-31 18:26:40.813672-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP28 =0000000000000000"
2020-01-31 18:26:40.813732-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP2C =0000000000000000"
2020-01-31 18:26:40.813791-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D418 =0000000000000007"
2020-01-31 18:26:40.813852-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D419 =000000000000003C"
2020-01-31 18:26:40.813912-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D41A =000000000000003C"
2020-01-31 18:26:40.813971-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D420 =000000006BF06BF0"
2020-01-31 18:26:40.814031-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D424 =000000000001FFF1"
2020-01-31 18:26:40.814090-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D428 =0000000000000000"
2020-01-31 18:26:40.814150-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D42C =0000000000000000"
2020-01-31 18:26:40.814210-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "NH10 =0000000082000000"
2020-01-31 18:26:40.814270-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "NH14 =0000000082040000"
2020-01-31 18:26:40.814329-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ICMBoot"
2020-01-31 18:26:40.814389-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Tbt TWIN set to One"
2020-01-31 18:26:40.814449-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Tbt Force Power with FPG0"
2020-01-31 18:26:40.814509-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Up Stream VID/DID =0000000015EA8086"
2020-01-31 18:26:40.814569-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ICMS"
2020-01-31 18:26:40.814629-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ICME_0="
2020-01-31 18:26:40.814688-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xffffffff
2020-01-31 18:26:40.814747-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI called"
2020-01-31 18:26:40.814808-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI RP OK!"
2020-01-31 18:26:40.814868-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI UPSB OK!"
2020-01-31 18:26:40.814927-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI Dp 0 done"
2020-01-31 18:26:40.814987-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI Dp 3 done"
2020-01-31 18:26:40.815047-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI Dp 4 done"
2020-01-31 18:26:40.815107-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI Dp 5 done"
2020-01-31 18:26:40.815167-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI DPs done"
2020-01-31 18:26:40.815226-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI0 all done"
2020-01-31 18:26:40.815285-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI End"
2020-01-31 18:26:40.815346-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ICME_1="
2020-01-31 18:26:40.815405-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x800001a1
2020-01-31 18:26:40.815465-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ICME_2="
2020-01-31 18:26:40.815524-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x800001a1
2020-01-31 18:26:40.815583-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ICME_3="
2020-01-31 18:26:40.815643-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x800001a7
2020-01-31 18:26:40.815702-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x800003f5
2020-01-31 18:26:40.815760-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ICME_4="
2020-01-31 18:26:40.815819-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x800001a7
2020-01-31 18:26:40.815878-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ISTA="
2020-01-31 18:26:40.815937-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x800003f5
2020-01-31 18:26:40.815997-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configuration delay = 1004 ms"
2020-01-31 18:26:40.816057-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP18 =0000000000000000"
2020-01-31 18:26:40.816158-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP19 =0000000000000006"
2020-01-31 18:26:40.817250-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP1A =0000000000000070"
2020-01-31 18:26:40.817383-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP1C =00000000000000F0"
2020-01-31 18:26:40.817528-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_20 =0000000082005400"
2020-01-31 18:26:40.817588-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_24 =0000000049F10001"
2020-01-31 18:26:40.817733-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_28 =0000000000000000"
2020-01-31 18:26:40.817877-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_2C =0000000000000000"
2020-01-31 18:26:40.817937-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP18 =0000000000000006"
2020-01-31 18:26:40.818082-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP19 =0000000000000007"
2020-01-31 18:26:40.818228-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP1A =0000000000000070"
2020-01-31 18:26:40.819264-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP1C =00000000000001F1"
2020-01-31 18:26:40.819405-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP20 =0000000082005400"
2020-01-31 18:26:40.819471-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP24 =0000000049F10001"
2020-01-31 18:26:40.819602-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP28 =0000000000000000"
2020-01-31 18:26:40.819735-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP2C =0000000000000000"
2020-01-31 18:26:40.819800-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP18 =0000000000000007"
2020-01-31 18:26:40.819894-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP19 =0000000000000008"
2020-01-31 18:26:40.820022-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP1A =0000000000000070"
2020-01-31 18:26:40.820086-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP1C =00000000000001F1"
2020-01-31 18:26:40.820190-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP20 =0000000082005400"
2020-01-31 18:26:40.820318-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP24 =0000000049F10001"
2020-01-31 18:26:40.820383-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP28 =0000000000000000"
2020-01-31 18:26:40.820484-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP2C =0000000000000000"
2020-01-31 18:26:40.820611-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D418 =0000000000000007"
2020-01-31 18:26:40.820675-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D419 =000000000000000A"
2020-01-31 18:26:40.820784-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D41A =000000000000000A"
2020-01-31 18:26:40.820846-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D420 =0000000000000000"
2020-01-31 18:26:40.820905-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D424 =0000000000010001"
2020-01-31 18:26:40.820965-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D428 =0000000000000000"
2020-01-31 18:26:40.821025-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D42C =0000000000000000"
2020-01-31 18:26:40.821084-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "NH10 =0000000054000000"
2020-01-31 18:26:40.821144-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "NH14 =0000000000000000"
2020-01-31 18:26:39.774461-0800 0x3d1      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "MODU - return = "
2020-01-31 18:26:39.774723-0800 0x3d1      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x1
2020-01-31 18:26:39.774814-0800 0x3d1      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "MODU - return = "
2020-01-31 18:26:39.774891-0800 0x3d1      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x1
2020-01-31 18:26:42.817371-0800 0x717      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "MUST NHI0"
2020-01-31 18:26:42.817568-0800 0x717      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "MUST UPSB called with arg: 0000000000000000"
2020-01-31 18:26:42.817705-0800 0x717      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UPSB UMPE"
2020-01-31 18:26:43.959671-0800 0x775      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "MODU - return = "
2020-01-31 18:26:43.960358-0800 0x775      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x0
2020-01-31 18:26:43.960573-0800 0x775      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "MODU - return = "
2020-01-31 18:26:43.960706-0800 0x775      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x0
2020-01-31 18:26:44.261231-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_PS3 XHC2, Nothing to do!"
2020-01-31 18:26:44.262940-0800 0x4d9      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_PS3 DSB2"
2020-01-31 18:26:44.263096-0800 0x4d9      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA DSB2"
2020-01-31 18:26:44.263189-0800 0x4d9      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "POFF DSB2"
2020-01-31 18:26:44.263280-0800 0x4d9      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA DSB2- Put upstream bridge into D3"
2020-01-31 18:26:44.263372-0800 0x4d9      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA DSB2- Set link disable on upstream bridge"
2020-01-31 18:26:44.263463-0800 0x4d9      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA DSB2- Wait for link to drop..."
2020-01-31 18:26:45.275466-0800 0x4d9      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA DSB2 - disable GPIO"
2020-01-31 18:26:45.275974-0800 0x4d9      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - PCI wants on"
2020-01-31 18:26:45.276379-0800 0x4d9      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - NHI wants on"
2020-01-31 18:26:45.276512-0800 0x4d9      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - XHCI wants off"
2020-01-31 18:26:45.276607-0800 0x4d9      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - TBT forced on"
2020-01-31 18:26:45.276700-0800 0x4d9      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - USB allows off"
2020-01-31 18:26:45.276792-0800 0x4d9      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - TBT GPIO should be on"
2020-01-31 18:26:45.276883-0800 0x4d9      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - USB GPIO should be off"
2020-01-31 18:26:45.276976-0800 0x4d9      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is on"
2020-01-31 18:26:50.104397-0800 0x775      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "MUST NHI0"
2020-01-31 18:26:50.104536-0800 0x775      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "MUST UPSB called with arg: 0000000000000000"
2020-01-31 18:27:08.197674-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RTPC NHI0 called with arg: 0000000000000000"
2020-01-31 18:27:08.198101-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_PS3 NHI0, Nothing to do!"
2020-01-31 18:27:08.199251-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_PS3 DSB0"
2020-01-31 18:27:08.199328-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA DSB0"
2020-01-31 18:27:08.199402-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "POFF DSB0"
2020-01-31 18:27:08.199475-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA DSB0- Put upstream bridge into D3"
2020-01-31 18:27:08.199548-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA DSB0- Set link disable on upstream bridge"
2020-01-31 18:27:08.199621-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA DSB0- Wait for link to drop..."
2020-01-31 18:27:09.206291-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA DSB0- disable GPIO"
2020-01-31 18:27:09.206366-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - PCI wants on"
2020-01-31 18:27:09.206442-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - NHI wants off"
2020-01-31 18:27:09.206517-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - XHCI wants off"
2020-01-31 18:27:09.206592-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - TBT allows off"
2020-01-31 18:27:09.206668-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - USB allows off"
2020-01-31 18:27:09.206743-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - TBT GPIO should be on"
2020-01-31 18:27:09.206818-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - USB GPIO should be on"
2020-01-31 18:27:09.206895-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is on"
2020-01-31 18:27:09.207503-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_PS3 UPSB Nothing to do!"
2020-01-31 18:27:09.211044-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_PS3 RP05"
2020-01-31 18:27:09.211123-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "POFF RP05"
2020-01-31 18:27:09.211201-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_PS3 Calling CTBT"
2020-01-31 18:27:09.211279-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "CTBT"
2020-01-31 18:27:09.211356-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "CTBT - TBT domain is enabled"
2020-01-31 18:27:09.211434-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "CRMW Read Value1"
2020-01-31 18:27:09.211516-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x0
2020-01-31 18:27:09.211597-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "CRMW Write Value1"
2020-01-31 18:27:09.211679-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x4000000
2020-01-31 18:27:09.211761-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "CRMW Read Value2"
2020-01-31 18:27:09.211843-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x1c000000
2020-01-31 18:27:09.211926-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "CRMW Success"
2020-01-31 18:27:09.212008-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "CTBT - Set CP_ACK_POWERDOWN_OVERRIDE"
2020-01-31 18:27:09.212092-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_PS3 Calling PCDA"
2020-01-31 18:27:09.212172-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA RP05"
2020-01-31 18:27:09.212251-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "POFF RP05"
2020-01-31 18:27:09.212334-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA RP05- Put upstream bridge into D3"
2020-01-31 18:27:09.212418-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA RP05- Set link disable on upstream bridge"
2020-01-31 18:27:09.212500-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA RP05- Wait for link to drop..."
2020-01-31 18:27:09.294462-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA RP05- No link activity"
2020-01-31 18:27:09.294549-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA RP05- disable GPIO"
2020-01-31 18:27:09.294635-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - PCI wants off"
2020-01-31 18:27:09.294718-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - NHI wants off"
2020-01-31 18:27:09.294800-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - XHCI wants off"
2020-01-31 18:27:09.294884-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - TBT allows off"
2020-01-31 18:27:09.294964-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - USB allows off"
2020-01-31 18:27:09.295045-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - TBT GPIO should be off"
2020-01-31 18:27:09.295124-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - USB GPIO should be off"
2020-01-31 18:27:09.295207-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is off"
2020-01-31 18:27:09.295289-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "CTBT"
2020-01-31 18:27:09.295371-0800 0x8f2      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - Turn off TBT & USBC GPIO"
2020-01-31 18:27:09.550306-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_E17 Tbt"
2020-01-31 18:27:09.550384-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UPSB AMPE"
2020-01-31 18:27:09.550459-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UPSB UMPE"
2020-01-31 18:27:09.550533-0800 0x74b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_E17 Exit"

Code:

2020-01-31 18:28:35.835680-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: Version 0.1.4 starting on OS X Darwin 19.3.
2020-01-31 18:28:35.837495-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x54039854
2020-01-31 18:28:35.837584-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xe00e4000
2020-01-31 18:28:35.837676-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xe0600000
2020-01-31 18:28:35.837770-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xe0700000
2020-01-31 18:28:35.837834-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xe0708000
2020-01-31 18:28:35.837895-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xe0710000
2020-01-31 18:28:35.837955-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xe0720000
2020-01-31 18:28:35.838020-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xe0800000
2020-01-31 18:28:35.838090-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_INI Root Port"
2020-01-31 18:28:35.838154-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP18 =0000000000000000"
2020-01-31 18:28:35.838215-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP19 =0000000000000006"
2020-01-31 18:28:35.838274-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP1A =0000000000000070"
2020-01-31 18:28:35.838335-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP1C =00000000000000F0"
2020-01-31 18:28:35.838396-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_20 =0000000082005400"
2020-01-31 18:28:35.838457-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_24 =0000000049F10001"
2020-01-31 18:28:35.838519-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_28 =0000000000000060"
2020-01-31 18:28:35.838579-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_2C =0000000000000060"
2020-01-31 18:28:35.838641-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP18 =00000000000000FF"
2020-01-31 18:28:35.838701-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP19 =00000000000000FF"
2020-01-31 18:28:35.838760-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP1A =00000000000000FF"
2020-01-31 18:28:35.838820-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP1C =000000000000FFFF"
2020-01-31 18:28:35.838880-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP20 =00000000FFFFFFFF"
2020-01-31 18:28:35.839100-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP24 =00000000FFFFFFFF"
2020-01-31 18:28:35.839161-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP28 =00000000FFFFFFFF"
2020-01-31 18:28:35.839221-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP2C =00000000FFFFFFFF"
2020-01-31 18:28:35.839280-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP18 =00000000000000FF"
2020-01-31 18:28:35.839340-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP19 =00000000000000FF"
2020-01-31 18:28:35.839400-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP1A =00000000000000FF"
2020-01-31 18:28:35.839606-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP1C =000000000000FFFF"
2020-01-31 18:28:35.839667-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP20 =00000000FFFFFFFF"
2020-01-31 18:28:35.839728-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP24 =00000000FFFFFFFF"
2020-01-31 18:28:35.839787-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP28 =00000000FFFFFFFF"
2020-01-31 18:28:35.839847-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP2C =00000000FFFFFFFF"
2020-01-31 18:28:35.839907-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D418 =00000000000000FF"
2020-01-31 18:28:35.839966-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D419 =00000000000000FF"
2020-01-31 18:28:35.840026-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D41A =00000000000000FF"
2020-01-31 18:28:35.840086-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D420 =00000000FFFFFFFF"
2020-01-31 18:28:35.840146-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D424 =00000000FFFFFFFF"
2020-01-31 18:28:35.840206-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D428 =00000000FFFFFFFF"
2020-01-31 18:28:35.840266-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D42C =00000000FFFFFFFF"
2020-01-31 18:28:35.840325-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "NH10 =00000000FFFFFFFF"
2020-01-31 18:28:35.840385-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "NH14 =00000000FFFFFFFF"
2020-01-31 18:28:35.840445-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ICMBoot"
2020-01-31 18:28:35.840505-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Tbt TWIN set to One"
2020-01-31 18:28:35.840565-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Tbt Force Power with FPG0"
2020-01-31 18:28:35.840625-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Up Stream VID/DID =0000000015EA8086"
2020-01-31 18:28:35.840684-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ICMS"
2020-01-31 18:28:35.840744-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ICME_0="
2020-01-31 18:28:35.840804-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0xffffffff
2020-01-31 18:28:35.840863-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI called"
2020-01-31 18:28:35.840923-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI RP OK!"
2020-01-31 18:28:35.840983-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI UPSB OK!"
2020-01-31 18:28:35.841043-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI Dp 0 done"
2020-01-31 18:28:35.841103-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI Dp 3 done"
2020-01-31 18:28:35.841163-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI Dp 4 done"
2020-01-31 18:28:35.841222-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI Dp 5 done"
2020-01-31 18:28:35.841281-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI DPs done"
2020-01-31 18:28:35.841342-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI0 all done"
2020-01-31 18:28:35.841402-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configure NHI End"
2020-01-31 18:28:35.841461-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ICME_1="
2020-01-31 18:28:35.841521-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x800001a1
2020-01-31 18:28:35.841581-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ICME_2="
2020-01-31 18:28:35.841641-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x800001a1
2020-01-31 18:28:35.841701-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ICME_3="
2020-01-31 18:28:35.841760-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x800001a7
2020-01-31 18:28:35.841819-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x800003f5
2020-01-31 18:28:35.841879-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ICME_4="
2020-01-31 18:28:35.841938-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x800001a7
2020-01-31 18:28:35.841997-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "ISTA="
2020-01-31 18:28:35.842056-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: 0x800003f5
2020-01-31 18:28:35.842116-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "Configuration delay = 1004 ms"
2020-01-31 18:28:35.842192-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP18 =0000000000000000"
2020-01-31 18:28:35.843351-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP19 =0000000000000006"
2020-01-31 18:28:35.843410-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP1A =0000000000000070"
2020-01-31 18:28:35.843555-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RP1C =00000000000000F0"
2020-01-31 18:28:35.843695-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_20 =0000000082005400"
2020-01-31 18:28:35.843754-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_24 =0000000049F10001"
2020-01-31 18:28:35.843899-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_28 =0000000000000000"
2020-01-31 18:28:35.844045-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "R_2C =0000000000000000"
2020-01-31 18:28:35.844104-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP18 =0000000000000006"
2020-01-31 18:28:35.844249-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP19 =0000000000000007"
2020-01-31 18:28:35.845349-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP1A =0000000000000070"
2020-01-31 18:28:35.845486-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP1C =00000000000001F1"
2020-01-31 18:28:35.845553-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP20 =0000000082005400"
2020-01-31 18:28:35.845672-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP24 =0000000049F10001"
2020-01-31 18:28:35.845799-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP28 =0000000000000000"
2020-01-31 18:28:35.845864-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UP2C =0000000000000000"
2020-01-31 18:28:35.845965-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP18 =0000000000000007"
2020-01-31 18:28:35.846091-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP19 =0000000000000008"
2020-01-31 18:28:35.846156-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP1A =0000000000000070"
2020-01-31 18:28:35.846272-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP1C =00000000000001F1"
2020-01-31 18:28:35.846397-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP20 =0000000082005400"
2020-01-31 18:28:35.846462-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP24 =0000000049F10001"
2020-01-31 18:28:35.846568-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP28 =0000000000000000"
2020-01-31 18:28:35.846696-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "DP2C =0000000000000000"
2020-01-31 18:28:35.846759-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D418 =0000000000000007"
2020-01-31 18:28:35.846862-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D419 =000000000000000A"
2020-01-31 18:28:35.846924-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D41A =000000000000000A"
2020-01-31 18:28:35.846985-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D420 =0000000000000000"
2020-01-31 18:28:35.847044-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D424 =0000000000010001"
2020-01-31 18:28:35.847104-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D428 =0000000000000000"
2020-01-31 18:28:35.847164-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "D42C =0000000000000000"
2020-01-31 18:28:35.847223-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "NH10 =0000000054000000"
2020-01-31 18:28:35.847283-0800 0xc8       Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "NH14 =0000000000000000"
2020-01-31 18:28:43.715891-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "RTPC NHI0 called with arg: 0000000000000000"
2020-01-31 18:28:43.716377-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_PS3 NHI0, Nothing to do!"
2020-01-31 18:28:43.717916-0800 0x1a4      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_PS3 DSB0"
2020-01-31 18:28:43.718011-0800 0x1a4      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA DSB0"
2020-01-31 18:28:43.718103-0800 0x1a4      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "POFF DSB0"
2020-01-31 18:28:43.718195-0800 0x1a4      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA DSB0- Put upstream bridge into D3"
2020-01-31 18:28:43.718287-0800 0x1a4      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA DSB0- Set link disable on upstream bridge"
2020-01-31 18:28:43.718378-0800 0x1a4      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA DSB0- Wait for link to drop..."
2020-01-31 18:28:44.729970-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA DSB0- disable GPIO"
2020-01-31 18:28:44.730066-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - PCI wants on"
2020-01-31 18:28:44.730159-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - NHI wants off"
2020-01-31 18:28:44.730252-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - XHCI wants on"
2020-01-31 18:28:44.730345-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - TBT allows off"
2020-01-31 18:28:44.730438-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - USB forced on"
2020-01-31 18:28:44.730531-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - TBT GPIO should be off"
2020-01-31 18:28:44.730623-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - USB GPIO should be on"
2020-01-31 18:28:44.730715-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is on"
2020-01-31 18:28:44.731360-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_PS3 UPSB Nothing to do!"
2020-01-31 18:28:44.732229-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_PS3 RP05"
2020-01-31 18:28:44.732304-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "POFF RP05"
2020-01-31 18:28:44.732379-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "_PS3 Calling PCDA"
2020-01-31 18:28:44.732453-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "PCDA RP05"
2020-01-31 18:28:44.732527-0800 0x17b      Default     0x0                  0      0    kernel: (kernel) ACPIDebug: "POFF RP05"

neo302 · Jan 31, 2020

@CaseySJ
Can someone please help me?

I have a Samsung 970 evo drive. 64GB dominator RAM, Vega 64, 9900K, Z390 Designare, the proper wifi / bt card.
I can't get MacOS Catalina to even attempt to install properly. Everything seems that it should work right, but it doesn't.
I've also tried two different Catalina downloads. One from Apple, and one from another source and it didn't make a difference.
I'm using the mini guide. BIOS is set properly.
Using SanDisk 16GB card.
Please see here:

Thank you!

nifranza · Jan 31, 2020

neo302 said:
@CaseySJ
Can someone please help me?

I have a Samsung 970 evo drive. 64GB dominator RAM, Vega 64, 9900K, Z390 Designare, the proper wifi / bt card.
I can't get MacOS Catalina to even attempt to install properly. Everything seems that it should work right, but it doesn't.
I've also tried two different Catalina downloads. One from Apple, and one from another source and it didn't make a difference.
I'm using the mini guide. BIOS is set properly.
Using SanDisk 16GB card.
Please see here:

Thank you!

What format did you use for the USB thumb drive and for the internal macOS disk?

It should be this for your USB:

And this for your internal SSD:

CaseySJ · Jan 31, 2020

neo302 said:
@CaseySJ
Can someone please help me?

I have a Samsung 970 evo drive. 64GB dominator RAM, Vega 64, 9900K, Z390 Designare, the proper wifi / bt card.
I can't get MacOS Catalina to even attempt to install properly. Everything seems that it should work right, but it doesn't.
I've also tried two different Catalina downloads. One from Apple, and one from another source and it didn't make a difference.
I'm using the mini guide. BIOS is set properly.
Using SanDisk 16GB card.
Please see here:

Thank you!

Are you using a Samsung 970 EVO or 970 EVO Plus?
Are you using two 32GB DIMMs or four 16GB DIMMs?
Also, what version of Clover is installed on your USB flash disk?

neo302 · Jan 31, 2020

nifranza said:
What format did you use for the USB thumb drive and for the internal macOS disk?

It should be this for your USB:
View attachment 447741
And this for your internal SSD:
View attachment 447740

Hello @nifranza
This is exactly what I did. I'm trying with another brand new SD card as I've tried so many times with the existing one.
Thank you

neo302 · Jan 31, 2020

CaseySJ said:
Are you using a Samsung 970 EVO or 970 EVO Plus?

Are you using two 32GB DIMMs or four 16GB DIMMs?

Also, what version of Clover is installed on your USB flash disk?

Hello @CaseySJ
Non plus version.
Four 16GB DIMMs.
Clover r5103.

I'm trying a new SD card for the heck of it.
Thank you!

neo302 · Jan 31, 2020

CaseySJ said:
Are you using a Samsung 970 EVO or 970 EVO Plus?

Are you using two 32GB DIMMs or four 16GB DIMMs?

Also, what version of Clover is installed on your USB flash disk?

@CaseySJ @nifranza
The different SD card didn't make a difference.

I have a USB hub connected to the motherboard. Connected to that is a corsair commander and lighting node pro. I have multiple RGB fans.
I have an LG 32 inch monitor with built in speakers, Corsair K70 Keyboard, and Glorious Model O mouse.

BIOS is F9B.

Could any of that matter?

Thank you again!

CaseySJ · Jan 31, 2020

neo302 said:
@CaseySJ @nifranza
The different SD card didn't make a difference.

I have a USB hub connected to the motherboard. Connected to that is a corsair commander and lighting node pro. I have multiple RGB fans.
I have an LG 32 inch monitor with built in speakers, Corsair K70 Keyboard, and Glorious Model O mouse.

BIOS is F9B.

Could any of that matter?

Thank you again!

The only suspicious item is the Corsair Commander connected to F_USB header on motherboard. Have you tried disconnecting it?

Also, please confirm that you formatted the 970 EVO as APFS and GUID Partition Map.

What is the size of your USB flash disk?

nifranza · Jan 31, 2020

neo302 said:
@CaseySJ @nifranza
The different SD card didn't make a difference.

I have a USB hub connected to the motherboard. Connected to that is a corsair commander and lighting node pro. I have multiple RGB fans.
I have an LG 32 inch monitor with built in speakers, Corsair K70 Keyboard, and Glorious Model O mouse.

BIOS is F9B.

Could any of that matter?

Thank you again!

I would try using a good old USB thumb drive for installing the OS. I never heard of anyone installing from an SD card. Perhaps it works, but I don't know. For me at least, a USB drive just feels like the right way. With that out of the way, I would try:

1. BIOS F9b should work, no problem there.
2. I would disconnect every non-essential USB device for your PC and just leave a USB keyboard, mouse and the USB installer.

If none of that fixes the issue, I'd think of creating a new install media since the current one might be corrupt, hence not working.

FormerUser-50757 · Feb 1, 2020

Back with a ”vengeance....”

I‘ve been settling in on this system/build for a couple of months now, with various issues, most of which I’ve managed to solve with the help of this forum. Many thanks.

I think I’m pretty sure I’ve got issues with running my 64gb of RAM (4x16gb) in XMP mode. Today was the first day I was able to work without crashing after disabling XMP in BIOS. I’m womdeimg if there’s an issue with using the Catalina fresh install mini guide with 64gb of ram installed? I‘m using 2666 ddr4 but it’s only stable at 2133mhz. Others elsewhere have noted that using more than 32gb causes freezing etc. Has anyone else experienced freezing or success with 64gb?

Search

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

CaseySJ

Moderator

neo302

nifranza

CaseySJ

Moderator

neo302

neo302

neo302

CaseySJ

Moderator

nifranza

FormerUser-50757

Forum

Guides

Downloads