- Joined
- Nov 12, 2012
- Messages
- 2
- Motherboard
- -
- CPU
- -
- Graphics
- -
Build
Pictures
Pictures can be seen in the album here.
Notes
Surprisingly, this build went rather flawlessly. As far as I can tell, everything is working perfectly (e.g. iGPU, Sound, Ethernet, WiFi, Bluetooth, etc) -- even the Recovery mode works. Installation was pretty straight forward:
Install / Configuration
- Motherboard: Gigabyte GA-H170N-WIFI (rev 1.0)
- CPU: Intel Core i7-6700T
- RAM: Kingston HyperX Fury Black 8GB (2x4GB) DDR4-2133
- SSD: Intel SSD Pro 180GB (SSDSCKJF180A5) m.2
- WiFi: Broadcom BCM94352Z
Pictures
Pictures can be seen in the album here.
Notes
Surprisingly, this build went rather flawlessly. As far as I can tell, everything is working perfectly (e.g. iGPU, Sound, Ethernet, WiFi, Bluetooth, etc) -- even the Recovery mode works. Installation was pretty straight forward:
Install / Configuration
- macOS 10.13.3 w/ UniBeast (followed guide here)
- MultiBeast
- Clover EFI
- Audio
- 100 Series Audio
- ALC1150
- Graphics Configuration
- Intel HD 530
- IntelGraphicsFixUp
- USB
- Increase Max Port Limit
- Ethernet
- IntelMausiEthernet v2.3.0
- System Definition
- iMac17,1
- WiFi
- BrcmFirmwareData.kext
- BrcmPatchRAM2.kext
- FakePCIID_Broadcom_WiFi.kext
- FakePCIID.kext
- USBInjectAll.kext
- Audio
- audio_cloverALC by toleda
- audio_CloverHDMI by toleda
- Clover
- Configuration/Devices
- UseIntelHDMI (true)
- Configuration/Devices
- Recovery mode