Contribute
Register

[Success] GA-H170N-WIFI / Skylake 10.13 (High Sierra) Install

Status
Not open for further replies.
Joined
Nov 12, 2012
Messages
2
Motherboard
-
CPU
-
Graphics
-
Build
  • Motherboard: Gigabyte GA-H170N-WIFI (rev 1.0)
  • CPU: Intel Core i7-6700T
  • RAM: Kingston HyperX Fury Black 8GB (2x4GB) DDR4-2133
  • SSD: Intel SSD Pro 180GB (SSDSCKJF180A5) m.2
  • WiFi: Broadcom BCM94352Z


Pictures


Pictures can be seen in the album here.


Notes

Surprisingly, this build went rather flawlessly. As far as I can tell, everything is working perfectly (e.g. iGPU, Sound, Ethernet, WiFi, Bluetooth, etc) -- even the Recovery mode works. Installation was pretty straight forward:


Install / Configuration

  1. macOS 10.13.3 w/ UniBeast (followed guide here)
  2. MultiBeast
    • Clover EFI
    • Audio
      • 100 Series Audio
      • ALC1150
    • Graphics Configuration
      • Intel HD 530
      • IntelGraphicsFixUp
    • USB
      • Increase Max Port Limit
    • Ethernet
      • IntelMausiEthernet v2.3.0
    • System Definition
      • iMac17,1
  3. WiFi
    • BrcmFirmwareData.kext
    • BrcmPatchRAM2.kext
    • FakePCIID_Broadcom_WiFi.kext
    • FakePCIID.kext
    • USBInjectAll.kext
  4. Audio
  5. Recovery mode
 
With my googling would land me to this post directly :)

Thanks @magn2o for this post, I have the same hardware after the SnazzyLab's video and this helped me a lot to re install High Sierra!

What about the MacOS updates? After installation it immediately downloaded update, is it safe to upgrade to incremental versions of the HS?
 
Last edited:
@PurpleZerg, please update your profile (personal details) with your Motherboard (Mobo), CPU and Graphics Card.
The Rules said:
Profiles need to contain at least your primary system to assist others with helping you.
 
Status
Not open for further replies.
Back
Top