- Aug 23, 2012
- Asus ROG Strix Z490-E
- RTX 3080 Ti (Win) / RX 560 (Mac)
- Mobile Phone
It should work with iGPU only via DisplayPort. HDMI never worked for me.
I received again a stop signal.
How can I start in verbose mode? What should I change in the config.pflist?
I just can modify the file with windows since I don't have macOS anymore. I'm trying your EFI with the Catalina installation.
-v is the main one, see here: https://dortania.github.io/OpenCore-Desktop-Guide/config.plist/comet-lake.html#nvram
You can use ProperTree to edit the file in Windows: https://github.com/corpnewt/ProperTree
This is the error that I receive with your last EFI:
Take a look here, make sure you have all your BIOS settings correct:
- Fast Boot
- VT-d (can be enabled if you set DisableIoMapper to YES)
- Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly)
- Intel SGX
- Intel Platform Trust
- CFG Lock (MSR 0xE2 write protection). (Already disabled in Asus BIOS)
- CSM - Compatibility Support Module
- Above 4G decoding
- Execute Disable Bit
- EHCI/XHCI Hand-off
- OS type: Windows 8.1/10 UEFI Mode
- DVMT Pre-Allocated(iGPU Memory): 64MB
<key>7C436110-AB2A-4BBB-A880-FE41995C9F82</key> <dict> <key>SystemAudioVolume</key> <data>Rg==</data> <key>boot-args</key> <string>alcid=1 shikigva=32 shiki-id=Mac-7BA5B2D9E42DDD94</string> <key>csr-active-config</key> <data>5wMAAA==</data> <key>prev-lang:kbd</key> <string>en-US:0</string> </dict>
Delete usbinjectall.kext, then use USBInjectAll_v0.7.5_FixUSB2.0-z490.kext , after that，you can see USB2.0 HUB in hackintool, now you can complete the USB port customization, if found, delete the RGB controller, if you use Broadcom WIFI network card, connect the Bluetooth device to the motherboard USB2.0, then You can find the Bluetooth device, this time Bluetooth can work.
If you use two graphics cards on the motherboard, GTX1070 and other AMD graphics cards, you need to disable GTX1070, because the 10.15 system will not support Nvidia graphics cards, if you do not disable Nvidia graphics cards, PC boot speed becomes slower
<key>PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)</key> <dict> <key>IOName</key> <string>#display</string> <key>class-code</key> <data>/////w==</data> <key>name</key> <data>I2Rpc3BsYXk=</data> </dict>
In order to make the NVRAM Reset to work you need to disable "HideAuxiliary" – in your EFI it is active, so I was not able to select it. Now, after the NVRAM Reset the SIP is active.
Just a small thing: when I start the system the boot menu is automatically selected on a windows partition and not anymore on macOS. How can I select the autostart for the macOS (instead of Windows)?