Ive recently bought a new hard drive and installed OC 0.6.5 with Catalina to test, runs fine so far, I have not done any post install steps yet (USB port mapping etc) but everything seems okay with it for the couple hours I spent with it.Updated to 11.2 and OC 0.6.6
Everything OK !
You can clone your system on your new hard drive and update it. I think that if you can update to Big Sur, it should work.Ive recently bought a new hard drive and installed OC 0.6.5 with Catalina to test, runs fine so far, I have not done any post install steps yet (USB port mapping etc) but everything seems okay with it for the couple hours I spent with it.
Quick question, can I update it straight to Big Sur. now that OC is running with Catalina, or is there some special steps? I tried to find that answer on the OC guides but maybe I missed it.
What version of Clover or OpenCore are you running?Hi Stork,
hope everything is fine on your end. My build (thx to all your help) is running smooth. Until recently, I discovered some „strange“ behavior. My keyboard and mouse (both Apple USB) are not responding anymore...
I take it you're running the latest version of Mojave which is 10.14.6, not 16.Booting is fine, everything work for hours and then suddenly the wheel of death and not input is possible anymore.
I`m running Mac OS 10.14.16 (18G8022) since last year, so no updates etc. at all.
Make sure your USB map is up to date.First I tried to reach the BIOS. Mouse/keyboard are working.
Next, I tried to boot into Recovery mode (space bar until my Clover screen pops up – mouse/keyboard are working), select the Recovery option and boot.......... then the fun starts.
When I reached the option screen (install, disk utility etc.) no input is possible anymore. Plugged into different USB ports....... nothing (even no „red“ light from under the mouse).
Any suggestions what this is?
To my knowledge, it`s zero and ones, either USB is working or not. There is no „in-between“, right?!?
BTW, I´m typing this post on the same system/build, so everything is working for now.
Until the next tick.....
best
Michael
I`m running v2.4k r4934What version of Clover or OpenCore are you running?
Correct, it`s 10.14.6... damn typoI take it you're running the latest version of Mojave which is 10.14.6, not 16.
What do you mean by „up to date“? Did I create a 15 port limit SSDT-USB.aml? Yes I did.Make sure your USB map is up to date.
The K420 has native support, they do not need the web drivers and the web drivers only work up to High Sierra.I believe nvidia is not loading properly