- Joined
- Nov 21, 2013
- Messages
- 21
- Motherboard
- Gigabyte GA Z370 AORUS Ultra Gaming - Clover
- CPU
- i5-6800K
- Graphics
- RX 580
- Mac
- Mobile Phone
I am looking for any assistance with a strange issue I am experiencing with my Sapphire Pulse RX 580 4GB and 10.13.5.
This is my second Hackintosh and I made the conscious choice to move to AMD for the graphics as I had experienced a range of issues with NVidia cards previously and could see that the native support for AMD was only increasing. Using the ‘Buyer’s Guide’, I purchased the Sapphire RX 580 card but opted for the 4GB model to save a bit of money.
I have followed a range of guides (including HackaShaq’s excellent build) and the system boots up without a problem and functions as expected. The issue arises about 1 or so hours into operation where the frame rate appears to drop to 0.2 fps. This means that that whole the mouse position refreshes smoothly the rest of the screen only refresh sporadically making the computer almost impossible to use…
My hardware is as follows:
My next thought is to look at entering a framebuffer for the card (as per this guide) but otherwise I am running out of ideas… I’d really appreciate any advice anyone might have!
This is my second Hackintosh and I made the conscious choice to move to AMD for the graphics as I had experienced a range of issues with NVidia cards previously and could see that the native support for AMD was only increasing. Using the ‘Buyer’s Guide’, I purchased the Sapphire RX 580 card but opted for the 4GB model to save a bit of money.
I have followed a range of guides (including HackaShaq’s excellent build) and the system boots up without a problem and functions as expected. The issue arises about 1 or so hours into operation where the frame rate appears to drop to 0.2 fps. This means that that whole the mouse position refreshes smoothly the rest of the screen only refresh sporadically making the computer almost impossible to use…
My hardware is as follows:
- Gigagbyte Z370 Ultra Gaming (Rev 1.0)
- Intel Core i5 8600K
- 32GB of 2400Mhz DDR 4 RAM
- Sapphire Pulse RX580 4GB
- Installing Lilu.kext and WhateverGreen.kext to EFI/EFI/CLOVER/Kexts/Other
- Using a range of options on the ‘Graphics’ page in Clover including ‘ATI’ and ‘RadeonInit’
- Enabling IGFX on the BIOS and using ‘Intel Graphics Fixup’ option on MultiBeast
My next thought is to look at entering a framebuffer for the card (as per this guide) but otherwise I am running out of ideas… I’d really appreciate any advice anyone might have!