Contribute
Register

[solved] No sound on 10.8.4 even after HP ProBook Installer 6.1

Status
Not open for further replies.
Joined
Jan 29, 2012
Messages
21
Motherboard
Dell Optiplex 9020
CPU
i5-3470
Graphics
HD 4600
Mac
  1. iMac
I did a combo update on my HP 4530s from 10.8.2 to 10.8.4

I have tried HP ProBook Installer 6.1 with the 10.8.3 support kexts, and then again with the 10.8.4 support kexts. I have also run kext wizard each time to repair disk permissions and rebuild kext cache.

Still no sound. Are there some other kexts I should wipe out?

HP 4530s 2.30 GHz Intel Core i3-2350M
 
No sound on 10.8.4 even after HP ProBook Installer 6.1

I did a combo update on my HP 4530s from 10.8.2 to 10.8.4

I have tried HP ProBook Installer 6.1 with the 10.8.3 support kexts, and then again with the 10.8.4 support kexts. I have also run kext wizard each time to repair disk permissions and rebuild kext cache.

Still no sound. Are there some other kexts I should wipe out?

HP 4530s 2.30 GHz Intel Core i3-2350M

You need 10.8.4 support kexts. And correct DSDT patch. How did you originally install?
 
No sound on 10.8.4 even after HP ProBook Installer 6.1

>> You need 10.8.4 support kexts. And correct DSDT patch. How did you originally install?

The 10.8.4 support kexts in your installer should be the correct ones (right?:)

As for the correct DSDT patch.. hmmm -- sandy bridge 2.30 GHz Intel Core i3-2350M
 
No sound on 10.8.4 even after HP ProBook Installer 6.1

>> You need 10.8.4 support kexts. And correct DSDT patch. How did you originally install?

The 10.8.4 support kexts in your installer should be the correct ones (right?:)

As for the correct DSDT patch.. hmmm -- sandy bridge 2.30 GHz Intel Core i3-2350M

Read the sticky guide for instructions on generating DSDT, under "BIOS updates/hardware upgrades."

You didn't answer my question about how you originally installed...
 
No sound on 10.8.4 even after HP ProBook Installer 6.1

So what to look for in log files? I do get an error dialog for bluetooth audio speakers not working (I dont care about BT audio, actually).. could this be relevant?
 
No sound on 10.8.4 even after HP ProBook Installer 6.1

So what to look for in log files? I do get an error dialog for bluetooth audio speakers not working (I dont care about BT audio, actually).. could this be relevant?

Could be... you might take a look at SysPrefs -> Sound and see if your settings make sense.
 
No sound on 10.8.4 even after HP ProBook Installer 6.1

Which log files would help to get this problem debugged, and where to put them? (pastebin.com) ?

I have disabled a previous setting that had bluetooth sound output to another machine.
"" "" updated to 10.8.4
" " run the probook installer with 10.8.4 kexts and the 4340s DSDT
"" have run kext wizard to repair permissions and rebuild kernel cache...

Which logs.. what next?

My volume indicator in the menu bar is greyed out.
 
No sound on 10.8.4 even after HP ProBook Installer 6.1

Which log files would help to get this problem debugged, and where to put them? (pastebin.com) ?

I have disabled a previous setting that had bluetooth sound output to another machine.
"" "" updated to 10.8.4
" " run the probook installer with 10.8.4 kexts and the 4340s DSDT
"" have run kext wizard to repair permissions and rebuild kernel cache...

Which logs.. what next?

My volume indicator in the menu bar is greyed out.

Did you remove the existing DSDT at /Extra/dsdt.aml (and reboot) prior to attempting to regenerate DSDT via ProBook Installer?
 
No sound on 10.8.4 even after HP ProBook Installer 6.1

removed /Extra/DSDT.aml

rebooted

reran Probook installer 6.1:
OS X Support kexts + 4x30s + mountain lion + 10.8.4

DSDT gen + Probook + 4x30s

optional patch + Atheros 9285

ran kext wizard + disk perms + kext cache rebuild

rebooted

sound device not detected in sys prefs .. menu volume controller greyed out
 
Status
Not open for further replies.
Back
Top