RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,016
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
hi, please slow with me and sorry my english, im amateur, i buy a hackintosh all install, i do anything, the problem is this.
my hackintosh first had a motherboard X79-UP5 that had 2 ethernet or 2 LAN,
then for some external problem the motherboard change to X79-UP4 that had 1 LAN, but the drivers
were still those of UP5.
so the problem is that i turn on the hackingtosh, i havent INTERNET, in network doesnt appeare to be connect anything but here in network have 2 ethernet in RED ( from motherboard UP5), when i reset the hack, appeare a 3rd ethernet (from motherboard UP4) and connect to internet.
So, i think that maybe unistall the 1st drivers LAN from the 1st mother UP5, and reinstall the UP4 kexts with multibeast.
i have maverick 10.9.3.
the 1st i do was reinstall the drivers but the problem was still there. not ethernet connect, not internet.
so i think erase manually the drivers and then reinstall with multibeast.
you said remove all networking kexts that aren't vanilla... That includes those in /S/L/E and /S/L/E/IONetworkingFamily.kext/Contents/PlugIns.????
i dont know how to do it, or where is this files. please step by step please tell me what files must to deleted????
thanks.
Maybe you should just do a fresh install. Having extra Ethernet drivers will not hurt anything (they simply won't be used if you don't have the hardware). But to have Ethernet working, you must, of course, install drivers that are written for the hardware you do have.
For a novice in hackintosh, an X79-based board was probably not the best choice.