Sierra 10.12.4 ConsiderRebuildOfPrelinkedKernel clean install

[bakgroove]

I feel like I am very close but who knows. I am able to install Sierra 10.12.4 but after the restart from my USB in clover, it goes to a grey screen with spinning wheel forever and ever..

Specs:
SSD: 500GB Samsung EVO 850
GRAPHICS: Nvidia GTX 770 4gb
RAM: Corsair Vengeance CML16GX3M2A1600C10 2x8GB PC3-12800 CL10 DDR3 RAM
CPU: Intel Core i7-3770T 2.5GHz Tray
MOTHERBOARD: Intel DH77DF

I am using the latest version of Clover. r4045. And was able to get this far using OsxAptioFixDrv-64.efi

Here's what's installed in drivers64UEFI on my clover usb below.



Here are the last things I see in -v:

Sound Assertion in AppleHDADriver at line 1098
busy timeout[0], (240s) kextd wait(0): 'AppleACPICPU
considerrebuildofprelinkedkernel prebuild rebuild has expired

Note: picture posted below does not contain last 2 lines (busy timeout....Considerrebuild...) due to me not wanting to wait around for another 4 minutes but it does happen every time I boot in this way.

Then after some time it goes to a grey screen and when I move the mouse, the cursor turns into a forever spinning wheel. Clicking makes it disappear (wow!).

The kexts I have in the clover/kexts folder on my USB I am booting from are attached. As well as my clover config.plist

Booting in safe mode results in "Boot Failed, sleeping for 10 seconds before exiting..."

Please help I am a video editor by trade and am very close to selling this computer for parts and just buying an iMac.

Note: This build worked with Mavericks 10.9.5 and I needed to update to Sierra to get the latest versions the Adobe CC 2017 software because Mavericks is basically obsolete.

 

[P1LGRIM]

Specs:
SSD: 500GB Samsung EVO 850
GRAPHICS: Nvidia GTX 770 4gb
RAM: Corsair Vengeance CML16GX3M2A1600C10 2x8GB PC3-12800 CL10 DDR3 RAM
CPU: Intel Core i7-3770T 2.5GHz Tray
MOTHERBOARD: Intel DH77DF

Profiles need to contain at least your primary system to assist others with helping you

I am using the latest version of Clover. r4045. And was able to get this far using OsxAptioFixDrv-64.efi

Latest Clover is r4061.

am very close to selling this computer for parts and just buying an iMac.

When I see another of these "I am going to give up" posts my first reaction is why bother helping if they don't have the determination to see it through ?

If you want someone to review your config.plist just attach it (not an image).

 

[bakgroove]

I will do my best to give you the information you need as I haven't posted before.

Trying new clover in the AM, will post results afterwards.

My primary system was running Mavericks 10.9.5 before I decided to update but also have a MBP 2013 running El Capitan 10.11.6. I did a clean install of my SSD hoping for better results. I backed up that previous working system on a separate HDD. My system definitions on that were iMac 14,2.

Here's config.plist attached.

Any help and/or sympathy would be appreciated as my way of living depends on it.

Latest Clover is r4061.



When I see another of these "I am going to give up" posts my first reaction is why bother helping if they don't have the determination to see it through ?

If you want someone to review your config.plist just attach it (not an image).

 

[P1LGRIM]

Profiles need to contain at least your primary system to assist others with helping you

 

[P1LGRIM]

Here's config.plist attached.

Your config.plist is nonsense.
If you have Nvidia why are you injecting Intel graphics and disabling Nvidia with nv_disable=1 ?

 

[bakgroove]

Your config.plist is nonsense.
If you have Nvidia why are you injecting Intel graphics and disabling Nvidia with nv_disable=1 ?

Whoops, bad mistake on my part. I'm new to Clover and figured when I made my USB it would use the pre-existing configurations into a new config.plist

Is this correct?

 

[bakgroove]

Also I put the latest version of clover on my thumb drive and ended up with the same result

 

[P1LGRIM]

Is this correct?

No, there is no need to inject Nvidia.

 

[bakgroove]

No, there is no need to inject Nvidia.

Set Nvidia to False in the config.plist and ended with the same result. Any idea what else it could be?

 

[P1LGRIM]

Set Nvidia to False in the config.plist and ended with the same result. Any idea what else it could be?

Perhaps you are not booting with the config.plist that you think you are.
I have attached a slightly modified config to this post, try it and see if the mode changes to verbose.
If it does not then you are not booting with it.
Do not boot with -v, it is included in the config.plist.