Contribute
Register

Sebinouse's Build : CustoMacMini 2014 - Intel NUC Haswell i5-4250U - El Capitan

Status
Not open for further replies.
OK this modification was for the installer and there is nothing for you to do ...

try to boot without caches (press spacebar during Clover drive selection and select without caches)

I don't seem to have that option...but if I select No Caches in System Parameters from the clover configurator.
Same problem...

EDIT: I deselected Inject System ID and now it boots. Weird...still no sound though.
 
Last edited:
Hi, everyone!
I'm using this build (since it was for 11.3 version, now it's also 11.3). The below problem:
Sometimes, when i turn on my NUC, by pressing hardware button on the top of my box, it hangs at the apple logo.
But when i reboot it again, by long - press the button and then press button again - it loads well.
Here is log from the popup after successfull boot:
Code:
Anonymous UUID:       0FBA11E1-4F78-CB19-D05F-528BB99F910A

Thu Dec  1 21:29:28 2016

*** Panic Report ***
panic(cpu 2 caller 0xffffff8003fd255a): Kernel trap at 0xffffff800443cfdd, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81e6679000, CR3: 0x000000000bd19000, CR4: 0x00000000001627e0
RAX: 0xffffff80260b2be0, RBX: 0x0000000000000013, RCX: 0x0000000000010002, RDX: 0x0000000000000000
RSP: 0xffffff81f052bc40, RBP: 0xffffff81f052bc80, RSI: 0xffffff80047270c0, RDI: 0xffffff8026e59780
R8:  0xffffff8026e59680, R9:  0x0000000000000010, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0xffffff8026e59680, R13: 0xffffff8026e59880, R14: 0xdeadbeefdeadbeef, R15: 0xffffff80047270c0
RFL: 0x0000000000010282, RIP: 0xffffff800443cfdd, CS:  0x0000000000000008, SS:  0x0000000000000000
Fault CR2: 0xffffff81e6679000, Error code: 0x0000000000000000, Fault CPU: 0x2, PL: 0

Backtrace (CPU 2), Frame : Return Address
0xffffff81c665ddf0 : 0xffffff8003edf792
0xffffff81c665de70 : 0xffffff8003fd255a
0xffffff81c665e050 : 0xffffff8003ff0233
0xffffff81c665e070 : 0xffffff800443cfdd
0xffffff81f052bc80 : 0xffffff7f85fd8f47
0xffffff81f052bcc0 : 0xffffff7f85fdad22
0xffffff81f052bce0 : 0xffffff7f85fdb02b
0xffffff81f052bd70 : 0xffffff7f85fdb1f2
0xffffff81f052bdc0 : 0xffffff7f85ff83e2
0xffffff81f052be40 : 0xffffff7f85ff8b8a
0xffffff81f052be80 : 0xffffff8004493d2d
0xffffff81f052bec0 : 0xffffff8004493836
0xffffff81f052bf30 : 0xffffff800448e4ea
0xffffff81f052bf70 : 0xffffff80044944cc
0xffffff81f052bfb0 : 0xffffff8003fccf77
      Kernel Extensions in backtrace:
         org.netkas.driver.FakeSMC(1364.0)[F9BDD56C-9FE4-345E-BD34-5706382AF0C9]@0xffffff7f85fd7000->0xffffff7f85feffff
            dependency: com.apple.iokit.IOACPIFamily(1.4)[5D7574C3-8E90-3873-BAEB-D979FC215A7D]@0xffffff7f84e93000
         org.hwsensors.driver.ACPISensors(1328.0)[E1751D5F-1208-30AE-9CDC-877370531816]@0xffffff7f85ff7000->0xffffff7f86004fff
            dependency: com.apple.iokit.IOACPIFamily(1.4)[5D7574C3-8E90-3873-BAEB-D979FC215A7D]@0xffffff7f84e93000
            dependency: org.netkas.driver.FakeSMC(1364)[F9BDD56C-9FE4-345E-BD34-5706382AF0C9]@0xffffff7f85fd7000

BSD process name corresponding to current thread: kernel_task

Mac OS version:
Not yet set

Kernel version:
Darwin Kernel Version 15.3.0: Thu Dec 10 18:40:58 PST 2015; root:xnu-3248.30.4~1/RELEASE_X86_64
Kernel UUID: DECC9F02-27D7-31F0-9599-A9EF2873902C
Kernel slide:     0x0000000003c00000
Kernel text base: 0xffffff8003e00000
__HIB  text base: 0xffffff8003d00000
System model name: Macmini7,1 (Mac-35C5E08120C7EEAF)

System uptime in nanoseconds: 1265910924
last loaded kext at 1162791250: com.apple.iokit.IONetworkingFamily    3.2 (addr 0xffffff7f84c4c000, size 184320)
loaded kexts:
org.hwsensors.driver.ACPISensors    1328
org.hwsensors.driver.CPUSensors    1328
org.netkas.driver.FakeSMC    1364
com.apple.driver.AppleACPIButtons    4.0
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleACPIEC    4.0
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleAPIC    1.7
com.apple.nke.applicationfirewall    163
com.apple.security.quarantine    3
com.apple.security.TMSafetyNet    8
com.apple.iokit.IONetworkingFamily    3.2
com.apple.iokit.IOUSBFamily    900.4.1
com.apple.iokit.IOUSBHostFamily    1.0.1
com.apple.driver.AppleUSBHostMergeProperties    1.0.1
com.apple.driver.AppleEFINVRAM    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    300.0
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleMobileFileIntegrity    1.0.5
com.apple.driver.AppleCredentialManager    1.0
com.apple.driver.DiskImages    417.2
com.apple.iokit.IOStorageFamily    2.1
com.apple.iokit.IOReportFamily    31
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    4.0
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.pthread    1
com.apple.kec.corecrypto    1.0
com.apple.kec.Libm    1
Model: Macmini7,1, BootROM MM71.0220.B00, 2 processors, Intel Core i5, 1,3 GHz, 16 GB, SMC 1.25f4
Graphics: Intel HD Graphics 5000, Intel HD Graphics 5000, Built-In
Memory Module: BANK0/DIMM0, 8 GB, DDR3, 1600 MHz, Crucial Technology, CT102464BF160B.C16
Memory Module: BANK1/DIMM0, 8 GB, DDR3, 1600 MHz, Crucial Technology, CT102464BF160B.C16
Bluetooth: Version 4.4.3f4 16616, 3 services, 26 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
PCI Card: Intel 8 Series Chipset Family USB xHCI Host Controller, USB Controller, Built In
PCI Card: Intel 8 Series Chipset Family USB Enhanced Host Controller #1, USB Controller, Built In
Serial ATA Device: HGST HTS541515A9E630, 1,5 TB
Serial ATA Device: INTEL SSDMCEAC240B3, 240,06 GB
USB Device: USB 2.0 Bus
USB Device: Hub
USB Device: USB 3.0 Bus
USB Device: Keyboard Hub
USB Device: Apple Keyboard
USB Device: Bluetooth HCI
Thunderbolt Bus:

Who knows why it has been occurred (from time to time... suppose) ? And how to fix?
 
Yesterday i caught hang again at boot. Here is attachment (-v mode in Clover)
 

Attachments

  • P61223-213619.jpg
    P61223-213619.jpg
    4.2 MB · Views: 233
newb question sorry - I am without wifi, so it is rather hard to look for answers...
cannot connect to the wifi and the network troubleshooter says 'incompatibe country code'...

how do i switch 'FR' -> 'US'?

thanks!
 
Is the intel NUC confirmed to work on OS Sierra?
 
Thanks to Sebinouse, Wonkey Donkey and all others.
Finally my NUC D54250WYK working on SIERRA
I Couldn't make HD audio to work , so I bought VANTEC NBA-120U Aluminum USB External Stereo Audio Adapter from newegg.com for $7.99 its working good. Also bought DW1510 BCM4322 BG half-size PCI-E wireless card from newegg.com for $10.99 both 2.5 GHz and 5 GHz working.
I did only follow the installation guide on page 1: UNIBEAST Install macOS Sierra on any supported intel-base PC.
I have to do nothing else. I did not have to use MULTIBEAST.
I am still a novice, if anyone kind enough to give a step by guide for HD Audio to work will appreciate.
 
I Couldn't make HD audio to work
Audio is fine on Sierra.
Also bought DW1510 BCM4322 BG half-size PCI-E wireless card from newegg.com for $10.99 both 2.5 GHz and 5 GHz working.
it's a good choice, should work OOB (not compatible with BIOS though)
did only follow the installation guide on page 1: UNIBEAST Install macOS Sierra on any supported intel-base PC.
I have to do nothing else. I did not have to use MULTIBEAST.
I am still a novice, if anyone kind enough to give a step by guide for HD Audio to work will appreciate.
If you don't folow my guide I won't help you sorry
 
I have a NUC working fine on El Capitan, with only the buzzing sound issue, which I had an app runaround for....

I would now like to update to Sierra. Is that a clean install or any easier method?
 
Status
Not open for further replies.
Back
Top