Read #362 of rehabman
FakePCIID.kext+FakePCIID_Broadcom_WiFi.kext for Airport branding.
BrcmPatchRAM2.kext+BrcmFirmwareRepo.kext for bluetooth firmware load/personality inject.
Clover patch required for 5ghz.
Clover patch required for handoff.
The config quoted above is almost right : you still have to remove SSDT-4.aml if you use FakePCIID_Broadcom_WiFi.kext & FakePCIID.kext (which is the config I use from now on).BrcmPatchRAM2.kext in EFI/...10.11/
SSDT-4.aml in EFI/CLOVER/ACPI/patched/
and
FakePCIID_Broadcom_WiFi.kext
FakePCIID.kext from release
in in EFI/...10.11/
and result was no 5 GHz, in the end I put in EFI/..../kexts/10.11/
BrcmFirmwareData.kext
I tinkered with config.plist on BCM94352 5 GHz from KextToPatch (changed from US to GB to FR) and in the end I got that 5 GHz frequency, no more XT in country code or "Third Party Adapter".
So I do not know what triggered that change, one kext from kexts/10.11/, me changing Country Code.
...
What bother me is not be able to make clean install with 5 GHz on it, it seems I alway need to thinker with kexts and Country codes in config.plist to get this frequency working.
I do get something curios in the end with this wifi card, on 2.4 GHz with 802.11.n router at 2 meters from it I get only 144 Mbps, and on 5 GHz on 450 Mbps possible connection I get only 300 Mbps, but here is a some distance.
So this is my experience till now with this card.
My magic mouse still have weird comportment sometimes, especially when a copy instance is involved or an install that involve a big copy operation. Sun after that operation is ended mouse begin to be normal in comportment, almost like a wired mouse.
my config now is that from attachmentView attachment 175424
I noticed two things:
1. Your BrcmPatchRAM2.kext is bigger than BrcmPatchRAM2.kext from RehabMan-FakePCIID-2016-0201.zip, on my config I use yours but I do not know what is more OK to use.
2. My SSDT-3.aml (from your zip) is smaller than yours (Sebinouse_20151101.zip), again what is different, apart the size .
Hey Sebinouse, thanks again for all the help, I really don't know how to express my gratitude. After playing with the monitor, it seems the opposite is true for the Dell - I have to disable DP1.2 and force it to use DP1.1a, and that fixed the crashing issue. I'm now happily running at 3440x1440@60Hz through the DP port!
Even if you own a NUC, this is off topic.i have Atheros AR9285 wifi card.
What should i change to get it work?
FakePCIID.kext+FakePCIID_Broadcom_WiFi.kext for Airport branding.
BrcmPatchRAM2.kext+BrcmFirmwareRepo.kext for bluetooth firmware load/personality inject.
Clover patch required for 5ghz.
Clover patch required for handoff.
I tried to restart from scratch on audio.
Can you try this new configuration :
Remove previous AppleHDA.kext in /S/L/E/
Copy original AppleHDA.kext (10.11.3 post#188) + AppleHDA_ALC283.kext in /S/L/E
rebuilt caches
reboot twice
This is what I found, on fresh start when I insert my phone headsets with mic on input from sound Internal Microphone transform in Line in, but if I try a second time this doesn't happen anymore. On first time mic work OK , I made a sound recording test on Quick Time Player an is OK.So if is a problem is with reset (reinitialization) of the input on a second insertion of the mic in 3.5 mm jack.Did you test the MIC ? ... mine shows up but doesn't work !
HDMI will work ... it's not related to AppleHDA