Sata 3 compatibility

[Slickademo]

Hey what's up, first off thanks for all the tutorials and help in advance. I recently got my first Hackintosh running and I have a few questions.

Specs:

GA-X58-UD3R rev 2.0 mobo
i7 980 CPU
24 GB corsair vengeance ram
Seasonic 80 plus platinum 860 watt PSU
Corsair force gt 120 GB ssd

OS X 10.8.2

My main concern is my ssds performance. For some reason when I plug drive into a sata 3 port it does not boot or recognize it. I'm getting low benchmarks on sata 2. I do a lot of video production so I need fast read and write time.

Other question is I installed a RME PCI card for mixing and making music. The drivers installed correctly but for some reason it comes up as a unrecognized device in my DAW (Reason 6.5)

Thank you!

 

[mindhormone]

You can find your kexts for SATA support in MultiBeast... Please look under Drivers & Bootloaders. Most probably under drives category. Read the description of each kext carefully before installing. Good luck!

 

[Slickademo]

You can find your kexts for SATA support in MultiBeast... Please look under Drivers & Bootloaders. Most probably under drives category. Read the description of each kext carefully before installing. Good luck!

So I'm assuming those were not included in the DSDT file I used? Either way sounds easy enough. Thank u for your help!!

 

[Slickademo]

You can find your kexts for SATA support in MultiBeast... Please look under Drivers & Bootloaders. Most probably under drives category. Read the description of each kext carefully before installing. Good luck!

None of the drivers worked I wonder if it's the motherboard or ssd. . .