SAMSUNG SERIES 7 SLATE/TABLET >>>>75% COMPLETE!<<<< 10.7.4

[jester969]

Re: SAMSUNG SERIES 7 SLATE/TABLET ::IN PROGRESS:: 10.7.2

Hey guys, OK sooooo. I have made a DSDT, still no screen , but we are getting closer.
More on that later.

I will post my DSDT later when i get home.

So what I have so far after compiling a "Work In Progress DSDT" is:

1)Sound and Volume controls without any voodoo kexts, just edited original Apple kexts.
Have not tested mic yet,but i will tonight.

2)Battery info and state without voodoo kexts, again just edited original Apple kexts.

3)Boot time has improved to a level of OMFG fast.

Ok will post a zip of the the DSDT, plists and kexts.

Till then...

I smell progress and coke...

Glad to hear you are still plugging away!

Still rooting for you.

 

[MAD AUDI SCIENTIST]

Re: SAMSUNG SERIES 7 SLATE/TABLET ::IN PROGRESS:: 10.7.2

I smell progress and coke...

Glad to hear you are still plugging away!

Still rooting for you.

And you know this mannnn...

So here we are with what I did yesterday.

1) I was able to compile a DSDT using DSDTse. I did this all with some codes I found alongside some native Apple kexts from this article. viewtopic.php?f=170&t=48206

Afte a few tries i was able to compile the DSDT with no errors. Having no clue of what I'm actually looking at and what I'm doing is a bit annoying, but please bare with me.

Installed DSDT with Camplist, but you can use Multi Beast or Chameleon Wizard that also works great. You can add cooler Themes with Chameleon Wizard. I included with my post clean os look.

2) Installed the kexts using Kext Wizard. Repair permission and clean kext cache.

WHAT HAPPENED:

1)Now we have Native audio, with side volume controls. Both mics work.

2) Battery shows all states. Charging, Percentage, and time remaining. The battery life did get a lot better. From 3h30m time to almost 5 hours.

3) Bluetooth menu changes to native BT connection set up screen.

4) Web cam acceleration seems to have also increased.

5) Display screen resolution is now 1366x768 and is recognized as an Internal Screen even though its still only displays out of HDMI out.
No internal LVDS yet working, but we are getting there.

Here are the files I used to get to where I am.
SAMSUNG_7_SLATE_FILES.zip
contents.png


Photos of what i see on my end.
AboutThis.png
AbtThisDisplay.png
Audio (Built In).png
Software.png
orgchameleonBootplist.png
TopBar.png

Let me now you thoughts. For those of you who have the tablet, try out the DSDT and document what you did. We need to get the screen up and running.

ALSO I'm running 10.7.0. It the only version i can boot in to -f and get screen to work at 1024x768.

Good luck

Keep on , and on, and on....

 

[MAD AUDI SCIENTIST]

Re: SAMSUNG SERIES 7 SLATE/TABLET ::IN PROGRESS:: 10.7.2

GUYS OMFG!!!!!

I JUST RE-EDITED MY DSDT...
AND WE HAVE FULL HD3000 on native Screen!!!!!!!! BOOOYAAA

HDMI out now works as extended screen, as it should.
Full 384MB Vram.
BUT, the screen is supper Light.
It looks ghosted. So...

Im backing up my new DSDT and doing a full 10.7.3 install.

Wish me luck!!!

Here is my new DSDT
DSDT.aml

 

[pippox0]

Re: SAMSUNG SERIES 7 SLATE/TABLET ::IN PROGRESS:: 10.7.2

GUYS OMFG!!!!!

I JUST RE-EDITED MY DSDT...
AND WE HAVE FULL HD3000 on native Screen!!!!!!!! BOOOYAAA

HDMI out now works as extended screen, as it should.
Full 384MB Vram.
BUT, the screen is supper Light.
It looks ghosted. So...

Im backing up my new DSDT and doing a full 10.7.3 install.

Wish me luck!!!"

--------------
Congratulations, Very good job !

 

[MAD AUDI SCIENTIST]

Re: SAMSUNG SERIES 7 SLATE/TABLET ::IN PROGRESS:: 10.7.2

Ok, Just did a clean 10.7.0 Install with new DSDT and still ghosted screen, but full 384mb of ram even in -f boot flag.
So now I'm upgrading to 10.7.3...lets see what happens...

Thanks pippox0

 

[massinegro204]

Re: SAMSUNG SERIES 7 SLATE/TABLET ::IN PROGRESS:: 10.7.2

Ok, Just did a clean 10.7.0 Install with new DSDT and still ghosted screen, but full 384mb of ram even in -f boot flag.
So now I'm upgrading to 10.7.3...lets see what happens...

Thanks pippox0

Hi, I'm glad there is someone like me who is working to get lion on this tablet. I wanted to ask if the partition and mbr or guid ? such chimera are you using? I have tried using 1.4 in multibeast 3.8 and the hdmi port is fully recognized, even though I do not remember well how ram.I have also tried to change Apple16x50Serial.kext to recognize the touch as serial ISD-V4 and install TabletMagic and also get the exact touch . to forgot or even tried installing globetrotter hsupa modem to operate the internal module. I've been trying various solutions .... Hello

 

[MAD AUDI SCIENTIST]

Re: SAMSUNG SERIES 7 SLATE/TABLET ::IN PROGRESS:: 10.7.2

Hi, I'm glad there is someone like me who is working to get lion on this tablet. I wanted to ask if the partition and mbr or guid ? such chimera are you using? I have tried using 1.4 in multibeast 3.8 and the hdmi port is fully recognized, even though I do not remember well how ram.I have also tried to change Apple16x50Serial.kext to recognize the touch as serial ISD-V4 and install TabletMagic and also get the exact touch . to forgot or even tried installing globetrotter hsupa modem to operate the internal module. I've been trying various solutions .... Hello

Well for the moment i have it as GUID and have both LION and WIN7 on it.
When i get a full install with screen working perfect and maybe some wacom tweaks, i will do a disk image and then make it mbr and rewrite the image over it.

Right now I have full graphic acceleration, but there is some hazy light issue. So I'm still at it.

Id love to see if you have any progress on the Wacom end.

 

[MAD AUDI SCIENTIST]

Re: SAMSUNG SERIES 7 SLATE/TABLET ::IN PROGRESS:: 10.7.2

OK Ladies and Gents.
I finaly made a working DSDT with some edited apple kexts and we now have…..drum roll please….

Working
1) HD3000 with Full 384MB Vram QE/CI on OSX Lion 10.7.0
2) Battery WITHOUT VooDoo kexts
3) Native Audio:Speakers, Volume Control, Analog and Digital mics,
4)Both Web cams, (Photo Booth a tiny bit jumpy)
5)Super Speed Boot Up.

NOT working.
1)Internal Wi-Fi (using ASUS N-10 USB dungal)
2)Wacom tablet recognition by Wacom software. Cant be calibrated yet.
3)Brightness Control

SO in a few short min. I will prepare all final files I have so you guys can get busy playing with your toys!…I KNOW IM PHYSIQUED!!!! ya baby almost there.

 

[massinegro204]

Re: SAMSUNG SERIES 7 SLATE/TABLET ::IN PROGRESS:: 10.7.2

OK Ladies and Gents.
I finaly made a working DSDT with some edited apple kexts and we now have…..drum roll please….

Working
1) HD3000 with Full 384MB Vram QE/CI on OSX Lion 10.7.0
2) Battery WITHOUT VooDoo kexts
3) Native Audio:Speakers, Volume Control, Analog and Digital mics,
4)Both Web cams, (Photo Booth a tiny bit jumpy)
5)Super Speed Boot Up.

NOT working.
1)Internal Wi-Fi (using ASUS N-10 USB dungal)
2)Wacom tablet recognition by Wacom software. Cant be calibrated yet.
3)Brightness Control

SO in a few short min. I will prepare all final files I have so you guys can get busy playing with your toys!…I KNOW IM PHYSIQUED!!!! ya baby almost there.

for me it works with wifi to the kext changed although it don't connects perfectly to all . Last night I found this application (launch2net premium) that could operate the module 3g. the GTM671W is supported even if you receive a crash of the application when you run .

 

[madamimadam]

Re: SAMSUNG SERIES 7 SLATE/TABLET ::IN PROGRESS:: 10.7.2

OK Ladies and Gents.
I finaly made a working DSDT with some edited apple kexts and we now have…..drum roll please….

Working
1) HD3000 with Full 384MB Vram QE/CI on OSX Lion 10.7.0
2) Battery WITHOUT VooDoo kexts
3) Native Audio:Speakers, Volume Control, Analog and Digital mics,
4)Both Web cams, (Photo Booth a tiny bit jumpy)
5)Super Speed Boot Up.

NOT working.
1)Internal Wi-Fi (using ASUS N-10 USB dungal)
2)Wacom tablet recognition by Wacom software. Cant be calibrated yet.
3)Brightness Control

SO in a few short min. I will prepare all final files I have so you guys can get busy playing with your toys!…I KNOW IM PHYSIQUED!!!! ya baby almost there.

UPS gave me a tracking number, I should have one of these slates in my hands Monday. I am still just in awe of this development. I'm so excited about the possibility of mimicking your install that I've been reading up on what its going to take. Considering my last (non iOS ) apple computer was a 11e, I'm still on the low end of the learning curve for this type of undertaking. All the same, I'm extremely excited, and grateful for the hard work and determination from the few bright minds attacking this.