Contribute
Register

Randomly I can´t boot! Need help. Asus Sabertooth X79 Intel i7-4930K

Joined
Jan 18, 2014
Messages
16
Motherboard
Asus Sabertooth X79
CPU
Intel i7 4930K
Graphics
nVidia GTX 770
Mac
Classic Mac
Mobile Phone
iOS
Hello World!

I have a very strange situation: On Thursday in a week (16th) I have a presentation in my school about Hackintosh:headbang:. And so I need an (working) Hackintosh.

Today I decided to reinstall Yosemite because my old installation was full of trash from the video capturing.

Like every installation I booted from my UniBeast Usb stick and entered my ordinarily boot flag:
-v -x cpus=1 GraphicEnabler=No npci0x3000 PCIRootUID=0
But this time (I tried it 100 times) everything is unusual. I can see on the bootscreen: [PCI configuration begin] and then nothing happens. I never had this problem before.
I uploaded the picture.

I changed nothing on the Bios or the hardware. I'm 100% sure.

Can anyone help me??

It will be bad and the Thursday the 16th of June without a Hackintosh in a Hackintosh presentation.

With greetings from Germany!!

photo_2015-06-06_22-31-05.jpg
 
Joined
Jul 25, 2012
Messages
6,930
Motherboard
Gigabyte GA-Z77X-UP5 TH
CPU
i7-3770K
Graphics
HD 4000+GT 710
Mac
iMac, MacBook Pro
Mobile Phone
iOS
Hello World!

I have a very strange situation: On Thursday in a week (16th) I have a presentation in my school about Hackintosh:headbang:. And so I need an (working) Hackintosh.

Today I decided to reinstall Yosemite because my old installation was full of trash from the video capturing.

Like every installation I booted from my UniBeast Usb stick and entered my ordinarily boot flag:
-v -x cpus=1 GraphicEnabler=No
npci0x3000
PCIRootUID=0
But this time (I tried it 100 times) everything is unusual. I can see on the bootscreen: [PCI configuration begin] and then nothing happens. I never had this problem before.
I uploaded the picture.

I changed nothing on the Bios or the hardware. I'm 100% sure.

Can anyone help me??

It will be bad and the Thursday the 16th of June without a Hackintosh in a Hackintosh presentation.

With greetings from Germany!!

View attachment 140196



Since you are able to start booting with your Unibeast Yosemite USB Installer, the Installer and your BIOS options seem to be OK .

Because you have a boot arrest , the problem is most likely from the chosen Boot flags.
Change PCIRootUID=0 flag to PCIRootUID=1.The Syntax of npci flag shown in your settings is erroneous with the = [equal sign] missing.
it should be npci=0x2000 or npci=0x3000.

Hope this will help you.
 
Joined
May 9, 2011
Messages
5,894
Motherboard
GA-Z170X-Gaming 3
CPU
i7-6700
Graphics
Gigabyte GTX 970 WINDFORCE / Intel HD Graphics 530
Mac
iMac
Mobile Phone
iOS
Hello World!

I have a very strange situation: On Thursday in a week (16th) I have a presentation in my school about Hackintosh:headbang:. And so I need an (working) Hackintosh.

Today I decided to reinstall Yosemite because my old installation was full of trash from the video capturing.

Like every installation I booted from my UniBeast Usb stick and entered my ordinarily boot flag:
-v -x cpus=1 GraphicEnabler=No npci0x3000 PCIRootUID=0
But this time (I tried it 100 times) everything is unusual. I can see on the bootscreen: [PCI configuration begin] and then nothing happens. I never had this problem before.
I uploaded the picture.

I changed nothing on the Bios or the hardware. I'm 100% sure.

Can anyone help me??

It will be bad and the Thursday the 16th of June without a Hackintosh in a Hackintosh presentation.

With greetings from Germany!!

View attachment 140196
Try booting with "dart=0 PCIRootUID=1 npci=0x2000 -f -v" or "dart=0 PCIRootUID=1 npci=0x3000 -f -v"
 
Top