- Joined
- Apr 14, 2015
- Messages
- 2
- Motherboard
- GA-Z97M-D3H
- CPU
- i5-4690K
- Graphics
- GeForce GTX 750Ti
- Mac
- Classic Mac
- Mobile Phone
Hello everyone,
I recently built my first CustoMac, being also the first PC I ever built it was quite a big project for me. After finally getting the installation working and being at the point I could call my system quite stable, I'm left with one major issue.
My CustoMac will freeze randomly (quite rarely, but its annoying all the same), I have been unable to find out what exactly triggers it. Based on my hardware (listed below), could anyone give me an advice as to what might be the problem and/or how to fix this.
My build:
Other info:
Things I have tried thusfar:
The first 3 didn't change anything, currently testing with only 2.0 USB, but any other tips are welcome!!
I recently built my first CustoMac, being also the first PC I ever built it was quite a big project for me. After finally getting the installation working and being at the point I could call my system quite stable, I'm left with one major issue.
My CustoMac will freeze randomly (quite rarely, but its annoying all the same), I have been unable to find out what exactly triggers it. Based on my hardware (listed below), could anyone give me an advice as to what might be the problem and/or how to fix this.
My build:
- GA-Z97M-D3H
- Geforce GTX 750Ti
- i5-4690K
- Samsung 850 EVO 250Gb (Mac OS X)
- Samsung 850 EVO 120 Gb (Windows)
- Crucial DDR3 Ballistix Tactical 8Gb (2x)
Other info:
- Bootflags: kext-dev-mode=1, nvda_drv=1
- I have the Nvidia web driver installed for my graphics card
- I'm running OS X Yosemite (10.10.3)
Things I have tried thusfar:
- Did a clean install of OS X Yosemite, with only 1 RAM and the internal Graphics Card, connected through DVI (source: a friend)
- Switched to DVI (source: a friend)
- Switched to System definition iMac14,2 (https://www.youtube.com/watch?v=xS617-I1fF8)
- Switched to only using USB 2.0 (source: http://www.tonymacx86.com/yosemite-...zotac-geforce-260gtx-graphicsenabler-yes.html)
The first 3 didn't change anything, currently testing with only 2.0 USB, but any other tips are welcome!!