Quick Sync hardware encode w/ nVideo card as primary

[Baltazar]

You may need to install Lilu.kext and NvidiaGraphicsFixup.kext.

I have both of those in the 10.13 and Other folder.. is there another place I should put Lilu and NvidiaGraphicsFixup?

 

[pastrychef]

I have both of those in the 10.13 and Other folder.. is there another place I should put Lilu and NvidiaGraphicsFixup?

No. That's fine.

I don't know why FCPX is not using your Nvidia card. I don't use FCPX and don't know enough about it... Do you have the DSDT rename for your Nvidia so that it's GFX0?

 

[macbrush]

Try rollback your webdriver to 387.10.10.10.25.104.

BruceX will run over 3 mins on my GTx1080 Ti if I use the latest webdriver. I have had to rollback to 104 in last 3 macOS updates.

I'm having this exact same issue with my 4690k and GTX 980ti. Did all the DSDT patches and the BIOS settings like you, as well as the necessary kexts. Video Converter Pro shows hardware encoding is enabled but BruceX takes almost 2 minutes.

 

[Baltazar]

Try rollback your webdriver to 387.10.10.10.25.104.

BruceX will run over 3 mins on my GTx1080 Ti if I use the latest webdriver. I have had to rollback to 104 in last 3 macOS updates.

Thanks for this info. What is the proper procedure for rolling back to an earlier webdriver?

 

[BreBo]

Thanks for this info. What is the proper procedure for rolling back to an earlier webdriver?

Try nvidia-update - Simple way to install nVidia web drivers

 

[Az1000]

Hello, I need to help for enable quick sync, I have intel core i7 2600 with Nvidia Geforge Gt 610.
I have attached the screens of my configuration.
For the intel core i7 2600, there isn't a ig-platform-id, and I don't know what to do.
Sorry for my English, I'm Italian.

 

[shuhung]

Hello, I need to help for enable quick sync, I have intel core i7 2600 with Nvidia Geforge Gt 610.
I have attached the screens of my configuration.
For the intel core i7 2600, there isn't a ig-platform-id, and I don't know what to do.
Sorry for my English, I'm Italian.

SNB + Nvidia IQSV seems to be work in 10.13.x with latest shiki, but GT610 may not work in 10.13.x.

Try empty frame ig-platform-id 0x00030030 for SNB, need latest shiki with boot arg shikigva=4 + shikigva=8 + shikigva=128, may be also need add shikigva=16.

 

[Az1000]

Hello, I tryed set ig-platform-id , and download the latest shiki (2.2.3 RELEASE) and set boot arg with shikigva=4 + shikigva=8 + shikigva=128, and shikigva=16, but don't work.
I have Mac Os El capitan 10.11.6 (15G19009) with nvidia web driver.
Could it be that it serves mac os High Sierra? But GT610 don't work in Mac Os High Sierra.
That is, it has a graphic acceleration, but it does not go off and does not restart.

 

[shuhung]

Hello, I tryed set ig-platform-id , and download the latest shiki (2.2.3 RELEASE) and set boot arg with shikigva=4 + shikigva=8 + shikigva=128, and shikigva=16, but don't work.
I have Mac Os El capitan 10.11.6 (15G19009) with nvidia web driver.
Could it be that it serves mac os High Sierra? But GT610 don't work in Mac Os High Sierra.
That is, it has a graphic acceleration, but it does not go off and does not restart.

For example shikigva=132 (shikigva=4 + shikigva=128), summing up shikigva you need, it may or may not work in 10.11.X.

Shikigva list see below link
https://github.com/vit9696/Shiki/blob/master/Shiki/kern_start.cpp#L18

 

[Az1000]

Hello, I tried all the combinations, even 255, but it doesn't work.