[Question] Can I Get Full Working HD 630 + RX 560 (10.13.5)

[Cclown98]

​

Specifications

Processor                           :Intel Core i7 7700K @ 4.10GHz - 4.5GHz

Graphics Processor(GPU)             :Intel HD Graphics 630
                                     ASUS RX560 OC 2GB


Motherboard                         :MSI B250 Krait Gaming

Chipset                             :Intel B250 Express

Hard disk                           :223GB KINGSTONE-A400 (SSD)    (WORKING/MAX SPEED)

RAM                                 :8GB DDR4 2600 MHz ADATA

Wifi                                :TP-LINK WN823N Wireless Network Adapter

LAN                                 :Intel I219V

Audio                               :Realtek High Definition Audio ALC892

USB 3.0                             :Intel Panther Point PCH - USB 3.0 xHCI Controller





Interface :

6 x SATA-600, 2 x M.2

1 x USB-C Gen 2 + 1 x USB 3.1 Gen 2 + 2 x USB 3.1 Gen 1 + 2 x USB 2.0

1x DVI-D, 1x HDMI - Board

1x LAN

1x PS/2 keyboard / mouse

High Definition Audio (8-channel)

Graphics Processor: Intel HD 630 is "partially working" (256 mb set by bios) and Asus RX560 OC card is working perfectly.

HDMI Port + DVI-D : Are working perfectly with dual monitor and full acceleration.

Wifi: WN823N is fully working.

LAN: Intel I219V is fully working.

Audio: Working well

Trim: Trim Enabled via sudo trimforce enable


I'm actually on 10.13.5

Is there any way i could get both (iGPU and eGPU) working well hd 630 is recognized as a PCI device but it won't appear on graphic cards in the system report, on PCI devices it says compatible with VGA device, also in iStats app the use of memory is always the same and the iGPU processors says 0 MHz, the worth thing is that any screen connected to the IGPU wont be recognized i've tried via DVI-D and HDMI.

​

 

[slippyr4]

Your config.plist has 0x59120003 for ig-platform-id - which is a connectorless platform id. That tells macOs that there are no video outputs. Your IGFX will be accelerating H264 decoding, but it won't support video output.

If you change to 0x59120000 then you should come up with two working video cards. You'll need to be on iMac18,2 or imac18,3