I posted about this in the "Quick Guide to generate a SSDT for Power Management" but haven't had a reply yet. Since it's a Gene following this guide, I hope it's OK in this forum.
I ran the beta branch of ssdtPRGen.sh and got these warning/error messages (my font highlighting):
Notice: Downloading Restrictions.cfg ...
Generating ssdt.dsl for a 'iMac14,2' with board-id [Mac-27ADBB7B4CEE8E61]
Kaby Lake Core i5-7600K processor
[0x906E9] setup [0x0605]
With a maximum TDP of
95 Watt, as specified by Intel
Number logical CPU's: 4 (Core Frequency: 3800 MHz)
Number of Turbo States: 4 (3900-4200 MHz)
Number of P-States: 35 (800-4200 MHz)
Injected C-States for CPU0 (C1,C3,C6,C7,C8,C9,C10)
Injected C-States for CPU1 (C1,C2,C3,C6,C7)
Warning: 'cpu-type' may be set improperly (0x0605 instead of 0x0905)
- Clover users should read
https://clover-wiki.zetam.org/Configuration/CPU#cpu_type
Error: board-id [Mac-27ADBB7B4CEE8E61] not supported by Kaby Lake – check SMBIOS data / use the -target option
Do you want to continue (y/n)? y
Warning: 'system-type' may be set improperly (1 instead of 2)
- Clover users should read
https://clover-wiki.zetam.org/Configuration/ACPI#acpi_smartups
show it as 91 Watt.
Also, I don't understand warning about cpu-type — is that the same as CPUID? And is the system-type warning serious? Overall, can I safely install the SSDT, which compiled without error?