Contribute
Register

pastrychef's Asus ROG Strix Z370-G Gaming (WI-FI AC) build w/ i9-9900K + AMD 6600 XT

Hey, Happy New Year! I just installed a BCM94360CS2 with an M.2. Adapter and although macOS is recognizing the card for both WiFi and Bluetooth, neither are working. I'm using the OpenCore EFI, is there anything I have to change from the default for the card to work?

Thanks.
 

Attachments

  • Screen Shot 2021-01-02 at 3.29.55 PM.png
    Screen Shot 2021-01-02 at 3.29.55 PM.png
    17.2 KB · Views: 25
  • Screen Shot 2021-01-02 at 3.30.09 PM.png
    Screen Shot 2021-01-02 at 3.30.09 PM.png
    22.3 KB · Views: 21
  • Screen Shot 2021-01-02 at 3.30.15 PM.png
    Screen Shot 2021-01-02 at 3.30.15 PM.png
    7.1 KB · Views: 26
Hey, Happy New Year! I just installed a BCM94360CS2 with an M.2. Adapter and although macOS is recognizing the card for both WiFi and Bluetooth, neither are working. I'm using the OpenCore EFI, is there anything I have to change from the default for the card to work?

Thanks.

Go to config.plist > Kernel > Quirks and enable DisableIoMapper.

Edit:
Also, make sure to use the plastic screw under the BCM94360CS2. If you use a metal screw, make sure it is not making contact with the BCM94360CS2.
 
Last edited:
Go to config.plist > Kernel > Quirks and enable DisableIoMapper.

Edit:
Also, make sure to use the plastic screw under the BCM94360CS2. If you use a metal screw, make sure it is not making contact with the BCM94360CS2.
DisableIOMapper is already enabled. I'll check to make sure the metal standoff isn't making contact.
 
Hey. What do those keys in the BOOT (Clover)?

-lilubetaall
-vsmcbeta
-wegbeta
-alcbeta
-disablegfxfirmware
 
-lilubetaall


-vsmcbeta


-wegbeta
-disablegfxfirmware


 
I didn't change anything between yesterday and today but Bluetooth is now working through the card; still no luck with WiFi though, macOS doesn't want to turn it on.
 
I didn't change anything between yesterday and today but Bluetooth is now working through the card; still no luck with WiFi though, macOS doesn't want to turn it on.

Did you check the metal screw behind the BCM94360CS2 yet?
 
OpenCore EFI updated to version 0.6.5.

As usual, do not use your old config.plist. Instead, copy/paste your Serial, Board Serial, UUID, and MAC address to the new config.plist.
 
Clover EFI updated to r5128.
 
Back
Top