- Joined
- Mar 26, 2011
- Messages
- 74
MB - Asus P8P67 Deluxe (B3) Bios 1502
CPU - i7 2600k
GPU - Sapphire HD 6850
RAM - Corsair Vengeance 1866 (4GB for installation)
PSU - Corsair TX850w
My build is stable and already installed Windows 7 Pro 64-bit on an OCS SSD. Sleep is even working.
I want to understand OS X and learn the basics, thus trying this out for the first time. Please bear with me.
I read the instructions, seems simple. But solutions to specific problems are all over. But anyway, I'm not even there yet.
Here's what I have right now:
Retail Snow Leopard DVD v10.6.3
iBoot
iBoot Legacy
MultiBeast 3.4
So far I've done:
1. UEFI.
Disabled Enhance Intel Speedstep Technology
Disabled Turbo Mode
Turbo Ratio to 35 (lowest I can set it to)
Set AHCI
Boot from ATAPI device
2. boot from iBoot
3. replaced iBoot with Snow Leopard retail DVD
After pressing enter, nothing happens, blank screen, and DVD activity stopped.
I repeat the process and put -x for safe mode, and got the message fatal error can't proceed, something like that.
I tried PCIRootUID=1, and still blank screen.
I also tried iBoot Legacy, and the same blank screen.
Did I miss anything?
Any help will be appreciated. Thanks.
CPU - i7 2600k
GPU - Sapphire HD 6850
RAM - Corsair Vengeance 1866 (4GB for installation)
PSU - Corsair TX850w
My build is stable and already installed Windows 7 Pro 64-bit on an OCS SSD. Sleep is even working.
I want to understand OS X and learn the basics, thus trying this out for the first time. Please bear with me.
I read the instructions, seems simple. But solutions to specific problems are all over. But anyway, I'm not even there yet.
Here's what I have right now:
Retail Snow Leopard DVD v10.6.3
iBoot
iBoot Legacy
MultiBeast 3.4
So far I've done:
1. UEFI.
Disabled Enhance Intel Speedstep Technology
Disabled Turbo Mode
Turbo Ratio to 35 (lowest I can set it to)
Set AHCI
Boot from ATAPI device
2. boot from iBoot
3. replaced iBoot with Snow Leopard retail DVD
After pressing enter, nothing happens, blank screen, and DVD activity stopped.
I repeat the process and put -x for safe mode, and got the message fatal error can't proceed, something like that.
I tried PCIRootUID=1, and still blank screen.
I also tried iBoot Legacy, and the same blank screen.
Did I miss anything?
Any help will be appreciated. Thanks.