- Joined
- Nov 7, 2015
- Messages
- 3
- Motherboard
- GA-P55-USB3
- CPU
- X3480
- Graphics
- GTX 1050 Ti
- Mac
- Classic Mac
- Mobile Phone
Hello!
It is not the first time I've been experimenting with my hackintosh and often I encounter constant problems, which sometimes have to be looked for in a very long time.
I believe that these solutions are suitable not only for this motherboard model, but for everyone who has this chipset model installed.
This topic was created in order to collect common problems in one topic, and if someone has them, they did not search for them on the Internet, but simply turned here.
All problem solutions were performed on the High Sierra 10.13.6
If anyone is interested, here are my build options:
Motherboard: Gigabyte GA-P55-USB3 v2 BIOS ver. F9
Graphics: Gigabyte GTX 1050ti
Processor: Intel Xeon x3480
Clover: ver. 4934
As new problems appear and their solutions are found, I will post it here.
Good luck to all!
It is not the first time I've been experimenting with my hackintosh and often I encounter constant problems, which sometimes have to be looked for in a very long time.
I believe that these solutions are suitable not only for this motherboard model, but for everyone who has this chipset model installed.
This topic was created in order to collect common problems in one topic, and if someone has them, they did not search for them on the Internet, but simply turned here.
All problem solutions were performed on the High Sierra 10.13.6
If anyone is interested, here are my build options:
Motherboard: Gigabyte GA-P55-USB3 v2 BIOS ver. F9
Graphics: Gigabyte GTX 1050ti
Processor: Intel Xeon x3480
Clover: ver. 4934
Upd: First you need to turn off the trim function
Enter password
Y
Y
Next, your system should reboot.
If you are faced with such a problem, which is manifested due to a non-patched AHCI chipset, then its solution.
AppleAHCIPort
Find --> 40600200
Replace --> 00000000
Link to the solution:
Code:
sudo trimforce disable
Y
Y
Next, your system should reboot.
If you are faced with such a problem, which is manifested due to a non-patched AHCI chipset, then its solution.
AppleAHCIPort
Find --> 40600200
Replace --> 00000000
Code:
<dict>
<key>MatchOS</key>
<string>10.13.x</string>
<key>Comment</key>
<string>ALPM IO Error AppleAHCIPort</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
QGACAA==
</data>
<key>Name</key>
<string>AppleAHCIPort</string>
<key>Replace</key>
<data>
AAAAAA==
</data>
</dict>
This problem appeared after switching to version 4934 of clover.
To correct this error, you need to check the Clover configurator.
To correct this error, you need to check the Clover configurator.
Kernel and Kext patches ---> AppleRTC
For me, the appearance of this problem was a big surprise, and for a long time I could not find a solution to it, but it exists!
From the folder kext delete the following file:
From the folder kext delete the following file:
After that, your system should shut down properly.GenericUSBXHCI.kext
As new problems appear and their solutions are found, I will post it here.
Good luck to all!
Last edited: