OS X 10.9.3 Update

[tonymacx86]

Article: OS X 10.9.3 Update

Web Drivers for 10.9.3 found by netkas once again - http://us.download.nvidia.com/Mac/Quadro_Certified/334.01.01f01/WebDriver-334.01.01f01.pkg

Great- thanks for the link!

 

[broomeman]

Article: OS X 10.9.3 Update

These instructions worked perfectly for me. Thank you.

GA-Z77X-UD5H
Nvidia GeForce GTX 650 Ti
Intel Core i5-3570K Ivy Bridge

Here's the step by step way to update:

Repair Permissions using the Disk Utility on the drive to be updated;*
Backup your current installation using Carbon Copy Cloner or SuperDuper;
Use the Software Update to download and install 10.9.3 (recommend using the Combo Update);
Re-boot;
Run MultiBeast for Mavericks and just select your audio driver to install and TRIM (if needed);
Re-boot; and
Repair Permissions again.*​

If you have TRIM enabled, check to see if it was affected by this update.


* You can use the Terminal instead of Disk Utility if you feel comfortable with a UNIX command:

sudo diskutil repairPermissions /

 

[InsaneCultist]

Web driver now available through NVIDIA driver updater.

 

[gunt]

Article: OS X 10.9.3 Update

Here's the step by step way to update:

Repair Permissions using the Disk Utility on the drive to be updated;*
Backup your current installation using Carbon Copy Cloner or SuperDuper;
Use the Software Update to download and install 10.9.3 (recommend using the Combo Update);
Re-boot;
Run MultiBeast for Mavericks and just select your audio driver to install and TRIM (if needed);
Re-boot; and
Repair Permissions again.*​

If you have TRIM enabled, check to see if it was affected by this update.


* You can use the Terminal instead of Disk Utility if you feel comfortable with a UNIX command:

sudo diskutil repairPermissions /

These instructions worked perfectly for me. Thank you.

GA-Z77X-UP5 TH
i7-3770K (Ivy Bridge)
GTX-670 4Gb Superclocked+ EVGA

 

[olivjh]

works perfectly with Z68X UD3 B3. just updated via the combo update and then reapplied multibeast 6.2.1 with my personal stuffs like audio alc 889 usb3 and graphicsenabler and it worked immediately. GREAT

 

[Gershy]

any support for Maxwell GPUs? like the 750 ti?

 

[Stork]

Article: OS X 10.9.3 Update

any support for Maxwell GPUs? like the 750 ti?

No. You'll have to await an Apple product update using the 750 chipset before natively supported in OS X. However, you can following this thread for more information: http://www.tonymacx86.com/general-h...ll-geforce-gtx-750-750-ti-graphics-cards.html

 

[tonymacx86]

Article: OS X 10.9.3 Update

FYI for anyone with the slow boot issue after 10.9.3 update- the AppleThunderboltNHI.kext is reinstalled, and needs to be removed again.

http://www.tonymacx86.com/general-help/128748-fix-slow-boot-thunderbolt-2-0-motherboards.html

 

[caru]

Article: OS X 10.9.3 Update

Got my GTX660 to work by disabling the on-board Intel graphics completely in BIOS (intel off and PCIe1 as initial graphics). While this works there is still something odd about multi-graphic-card setups. With 10.9.2 I had no issues leaving my Intel graphics on.

thanks, this helped me a lot. after update my dvi port was going off just before login screen... There was Nothing I could do.
Wiith 10.9.2 there hadn't been any need of disabling on board graphics.
After I disabled onboard graphics everything's started working again.

GA-Z87MX-D3H - i7 4770K - GeForce GTX 650

 

[reconalpha]

According to Mac Rumors some users are reporting a bug where the /Users folder is hidden for some, can anyone confirm?