- Joined
- Jan 7, 2011
- Messages
- 44
- Motherboard
- Gigabyte Z390 Aeorus Master
- CPU
- i9 9900k
- Graphics
- 6800 XT
- Mac
- Mobile Phone
Hi there,
I‘m trying to install Monterey with OpenCore following Dortania‘s guide as closely as possible.
HW is Gigabyte Aorus Master Z390 (BIOS F12N), i9900k, 64 GB ram (3600), Radeon 5700XT, SSD: WD_Black SN850 1TB
The SSD is the only drive in the system, except the USB SSD with the installer.
The SSD is brand new (not formatted yet).
I‘ve built a couple of Hackintoshes in my days, but this is my first attempt with OpenCore.
I have created the USB installer and configured OpenCore following Dortania‘s guide.
Booting from the installer I‘m presented with the OpenCore menu and select „Install macOS Monterey (external)“.
The installer then boots but rather quickly stops at or after the USB detection. Maybe two screens worth of messages.
The last lines on the screen are:
AppleUSB20HubPort@14d24300: AppleUSBHostPort::enumerateDeviceComplete_block_invoke: enumerated 0x05ac/828f/0150 (Bluetooth USB Host Controller) at 12 Mbps
AppleUSB20HubPort@14d24200: AppleUSBHostPort::enumerateDeviceComplete_block_invoke: enumerated 0x05ac/820b/0100 (IOUSBHostDevice) at 12 Mbps
There are several lines like this with other USB (watercooling) things before that.
A little bit further up I can see another line saying:
Previous shutdown cause: 5
Then the output just stops for a while (two, or three minutes) then the screen scrambles and „support.apple.com/mac/startup“ comes up.
I‘m looking at Doratnia‘s troubleshooting guide, but I‘m struggling to find anything like this in there.
Any pointer to a possible next step would be very much appreciated because I‘m pretty much stuck at this point.
Cheers,
John
I‘m trying to install Monterey with OpenCore following Dortania‘s guide as closely as possible.
HW is Gigabyte Aorus Master Z390 (BIOS F12N), i9900k, 64 GB ram (3600), Radeon 5700XT, SSD: WD_Black SN850 1TB
The SSD is the only drive in the system, except the USB SSD with the installer.
The SSD is brand new (not formatted yet).
I‘ve built a couple of Hackintoshes in my days, but this is my first attempt with OpenCore.
I have created the USB installer and configured OpenCore following Dortania‘s guide.
Booting from the installer I‘m presented with the OpenCore menu and select „Install macOS Monterey (external)“.
The installer then boots but rather quickly stops at or after the USB detection. Maybe two screens worth of messages.
The last lines on the screen are:
AppleUSB20HubPort@14d24300: AppleUSBHostPort::enumerateDeviceComplete_block_invoke: enumerated 0x05ac/828f/0150 (Bluetooth USB Host Controller) at 12 Mbps
AppleUSB20HubPort@14d24200: AppleUSBHostPort::enumerateDeviceComplete_block_invoke: enumerated 0x05ac/820b/0100 (IOUSBHostDevice) at 12 Mbps
There are several lines like this with other USB (watercooling) things before that.
A little bit further up I can see another line saying:
Previous shutdown cause: 5
Then the output just stops for a while (two, or three minutes) then the screen scrambles and „support.apple.com/mac/startup“ comes up.
I‘m looking at Doratnia‘s troubleshooting guide, but I‘m struggling to find anything like this in there.
Any pointer to a possible next step would be very much appreciated because I‘m pretty much stuck at this point.
Cheers,
John