- Joined
- Nov 8, 2013
- Messages
- 89
- Motherboard
- Asus ProArt Z490 Creator-10G
- CPU
- i9-10850K
- Graphics
- RX 580
- Mobile Phone
Hi all -
I have two older Hacks, both 4th-gen i7s, maxed out at 10.15.7.
I needed a faster machine for tasks like photo and video editing, so have put together a new machine with a Z490 Asus ProArt Creator 10G (Comet Lake), i9-10850K, and a Radeon rx580 (very similar to Stork's build). Linux and Windows are already up and running on one SSD drive; the Mac install will be on the other.
I have gone through Dortania's procedure for building the USB installer with OpenCore 0.8.5. I am at the point of starting the install, but when I boot it, I only get one option: "Windows". Nothing about installing MacOS, or OpenShell, or NVRAM. I have checked and double-checked that everything is in the right place per the instructions.
Have run ocvalidate and it comes up with four errors. There is nothing in the instructions about changing the <Patch> entries. Each of these refers to a line where the value is blank. There is nothing in the instructions about what should be in these fields.
ocvalidate config.plist
OCS: Missing key Limit, context <Patch>!
OCS: Missing key Mask, context <Patch>!
OCS: Missing key ReplaceMask, context <Patch>!
OCS: Missing key Skip, context <Patch>!
Serialisation returns 4 errors!
Completed validating config.plist in 6 ms. Found 4 issues requiring attention.
Can someone point me in the right direction?
I have attached a ZIP file containing my EFI directory, and also my config.plist.
Thanks in advance!
I have two older Hacks, both 4th-gen i7s, maxed out at 10.15.7.
I needed a faster machine for tasks like photo and video editing, so have put together a new machine with a Z490 Asus ProArt Creator 10G (Comet Lake), i9-10850K, and a Radeon rx580 (very similar to Stork's build). Linux and Windows are already up and running on one SSD drive; the Mac install will be on the other.
I have gone through Dortania's procedure for building the USB installer with OpenCore 0.8.5. I am at the point of starting the install, but when I boot it, I only get one option: "Windows". Nothing about installing MacOS, or OpenShell, or NVRAM. I have checked and double-checked that everything is in the right place per the instructions.
Have run ocvalidate and it comes up with four errors. There is nothing in the instructions about changing the <Patch> entries. Each of these refers to a line where the value is blank. There is nothing in the instructions about what should be in these fields.
ocvalidate config.plist
OCS: Missing key Limit, context <Patch>!
OCS: Missing key Mask, context <Patch>!
OCS: Missing key ReplaceMask, context <Patch>!
OCS: Missing key Skip, context <Patch>!
Serialisation returns 4 errors!
Completed validating config.plist in 6 ms. Found 4 issues requiring attention.
Can someone point me in the right direction?
I have attached a ZIP file containing my EFI directory, and also my config.plist.
Thanks in advance!
Attachments
Last edited: