- Joined
- Aug 14, 2020
- Messages
- 4
- Motherboard
- Z390 Designare
- CPU
- i5-9600k
- Graphics
- GTX 1080
Successfully installed Catalina 10.15.6 onto my system but when I check my graphics it only shows "display 22mb". Is there a solution released yet for UHD 630 for Catalina 10.15.6? Been looking everywhere but no luck in recent answers.
Used opencore 0.6.0 for this install. Something a little different about my config.plist is:
I tried using 07009B3E for my graphics but wouldn't boot. Looked up a solution and found the above on another forumn and using that I was able to get my system to boot.
My specs for my system:
Motherboard: Gigabyte Z390 Designare
CPU: Intel i5-9600k
GPU: GTX 1080 (Disabled using -wegnoegpu in the boot args) Intended to use onboard graphics
Things to note:
1) In my bios I have it set so IGFX is enabled
2) PCI is still set to PCIE Slot 1 (Should it be IGFX?)
Used opencore 0.6.0 for this install. Something a little different about my config.plist is:
AAPL,ig-platform-id | Data | 00001259 |
device-id | Data | 8680913E |
I tried using 07009B3E for my graphics but wouldn't boot. Looked up a solution and found the above on another forumn and using that I was able to get my system to boot.
My specs for my system:
Motherboard: Gigabyte Z390 Designare
CPU: Intel i5-9600k
GPU: GTX 1080 (Disabled using -wegnoegpu in the boot args) Intended to use onboard graphics
Things to note:
1) In my bios I have it set so IGFX is enabled
2) PCI is still set to PCIE Slot 1 (Should it be IGFX?)