- Joined
- Oct 31, 2012
- Messages
- 1
- Motherboard
- ASUS Prime Z270-A
- CPU
- i7-7700K
- Graphics
- RX 580
Hi all, new on the forum, first Hackintosh. And most things work - yay!
I followed the shopping list for the "deluxe version" with a GTX 660 Ti and an i7-3770 as close as possible (got a different brand PSU and SSD, also went with a Atheros 9280 Mini PCI-Card - still waiting for a Belkin BT-Adapter, that will hopefully work).
Once I turned off VT-d in BIOS, installation via Unibeast-USB was possible without any boot parameters - ethernet and wifi working right away, but no audio and no deep sleep.
Running MultiBeast with DSDT didn't work for me (boot-up stops after "ACPI_SMC_PlatformPlugin::registerLCPDriver - failed to locate SMC driver // considerRebuildOfPrelinkedKernel com.apple.driverAudioAUUC triggered rebuild")
Below is what I ended up using for now. Had to install network drivers, as ethernet functionality seems to get lost after installing the audio drivers.
Sleep now does work, wake up after doesn't (fans start spinning, screen shows "no signal")
I am not sure, where to go from here. Different MultiBeast settings? Nvidia driver?
Another minor, almost solved problem is the size of the alternative vga cooler, I put on the graphic card. I figured from some pictures, an Arctic Accelero Mono might fit in the Prodigy case. Well, its kinda close, but it doesn't. Now have to come up with some tinkered radiator grill for the hole...
I followed the shopping list for the "deluxe version" with a GTX 660 Ti and an i7-3770 as close as possible (got a different brand PSU and SSD, also went with a Atheros 9280 Mini PCI-Card - still waiting for a Belkin BT-Adapter, that will hopefully work).
Once I turned off VT-d in BIOS, installation via Unibeast-USB was possible without any boot parameters - ethernet and wifi working right away, but no audio and no deep sleep.
Running MultiBeast with DSDT didn't work for me (boot-up stops after "ACPI_SMC_PlatformPlugin::registerLCPDriver - failed to locate SMC driver // considerRebuildOfPrelinkedKernel com.apple.driverAudioAUUC triggered rebuild")
Below is what I ended up using for now. Had to install network drivers, as ethernet functionality seems to get lost after installing the audio drivers.
Sleep now does work, wake up after doesn't (fans start spinning, screen shows "no signal")
I am not sure, where to go from here. Different MultiBeast settings? Nvidia driver?
Another minor, almost solved problem is the size of the alternative vga cooler, I put on the graphic card. I figured from some pictures, an Arctic Accelero Mono might fit in the Prodigy case. Well, its kinda close, but it doesn't. Now have to come up with some tinkered radiator grill for the hole...