I have everything in Yosemite working with Clover except sound. Here is the requested info:
1) Followed the Clover/Clover Injection instructions here:
http://www.tonymacx86.com/yosemite-...mporary-guide-os-x-10-10-a-23.html#post909616
audio_cloverALC-100.command.sh would not run against the AppleHDA.kext supplied with 10.10.5 so I extracted it from 10.10.3. audio_cloverALC-100.command.sh ran fine against that kext, but switched the names of the inputs/outputs to Swedish (or is that Danish? See attachment). No combination of outputs/connections results in sound (IOregs saved while using VLC Player to play an MP3), but the Internal Speakers output does switch to Headphones when I plug in to the headphones jack in the front panel. At this point I have tried several different kexts and ran audio_cloverALC-100.command.sh a few times, but I checked config.plist and nothing seems to be duplicated..? I really don't care what port ends up working--I just want sound to come out of somewhere. This is a fresh OS X install on a newly formatted drive.
2) 10.10.5 / ASUS x99 Deluxe / 1901 / i7-5690X / GTX 980 SLI
3) cloverALC (script executed without errors, see terminal.txt)
4-10) see attached
11) Sennheiser HDR 180 connected to green port on mobo (tried others as well), Shure earbuds in headphone port on front. My Philips 288P monitor supports audio over DisplayPort (which works in Linux) via the GTX980, but does not produce any sound. With Sennheiser plugged into the green port in the back I can hear a dull "thud" sound when I cycle through the outputs in the control panel and sometimes I will hear hissing when I select the built-in mic input. But no actual sound--I tried VLC, Quicktime, iTunes, and various on-line videos and triple checked that the volumes were turned up and unmuted.
Let me know if I can provide any more information. Thanks.