MSI GL65 9SD - OC - Sonoma 14.1

[darkcloud8]

MSI GL65 9SD​

Specs
15.6" 1920 x 1080 IPS, 120hz
Intel Core i7 9750H 2600 Mhz
Intel(R) UHD Graphics 630
GTX 1660 Ti with 6GB GDDR6 (won't work of course)
16GB DDR4 (2x memory banks, 64GB maximum)
1 TB, M.2, PCI Express 3.0 x4 (NVMe 1.4) Samsung SSD 980
Intel(R) Wireless-AC 9560 160MHz / Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter PCI
720p camera
3x USB 3.1 Gen 1
1x USB 3.1 Gen 1 Type-C
HDMI
MicroSD card reader

Hello again everyone!
Monterey is already successfully installed on it (https://www.tonymacx86.com/threads/msi-gl65-9sd-oc-monterey-12-3.320052/). I'm currently trying to upgrade to Sonoma. The previous EFI was taken as a basis, Opencore and kexts were updated. From verbose it is clear that it reaches the installer (For a moment, the Apple logo with the download progress is visible) but after that the laptop screen goes blank. I tried to indicate that I have a built-in monitor following this guide (https://dortania.github.io/OpenCore-Post-Install/gpu-patching/intel-patching/connector.html), but the result is the same. Help me please!

 

[darkcloud8]

In infynite loop of attempts, i noticed that not all steps from guide(how to update opencore) were complited. I just pasted new files, but use old conf.plist. That mean i even haven't chanse no success before, i think. So, opencore configurator 0.9.6 showed me what's missing, i fixed that, and now have new problem, ofcourse)
Stuck with these lines

X86PlatformPlugin: :cgRegisterCallbackHandler - entered type cpu-limit-notification, target X86PlatformShim
X86PlatformPlugin: :cgRegisterPlimitCallbackHandler - There are 0 entries in the linked list before target name X86PlatformShim

 

[Feartech]

In infynite loop of attempts, i noticed that not all steps from guide(how to update opencore) were complited. I just pasted new files, but use old conf.plist. That mean i even haven't chanse no success before, i think. So, opencore configurator 0.9.6 showed me what's missing, i fixed that, and now have new problem, ofcourse)
Stuck with these lines

X86PlatformPlugin: :cgRegisterCallbackHandler - entered type cpu-limit-notification, target X86PlatformShim
X86PlatformPlugin: :cgRegisterPlimitCallbackHandler - There are 0 entries in the linked list before target name X86PlatformShim
View attachment 574706

MacBookPro15,2 is a better choice of smbios

 

[darkcloud8]

MacBookPro15,2 is a better choice of smbios

Thanks! I tryed, and now there is the new stop on verbose) Google even can't find nothing about that. I made a guess that proplem in RealtekRTL8111.kext and tryed to disable it, but all just the same.

 

[P1LGRIM]

I made a guess that proplem in RealtekRTL8111.kext and tryed to disable it, but all just the same.

80211 is Wireless not Ethernet, try disabling that instead.

 

[darkcloud8]

80211 is Wireless not Ethernet, try disabling that instead.

Thanks! But no success

 

[Feartech]

Thanks! But no success

disable smcprocessor and superio

 

[darkcloud8]

disable smcprocessor and superio

Done! And the new one

 

[Feartech]

Done! And the new one

disable all your intel wifi/bluetooth kexts

disable your usb kexts, enable: XhciPortLimit in config.plist, do your usb setup after installation

 

[darkcloud8]

disable all your intel wifi/bluetooth kexts

disable your usb kexts, enable: XhciPortLimit in config.plist, do your usb setup after installation

Done! But result is the same. Maybe i sould to disable all kexts and then enable it one by? Is there any kexts, that i can't disable? (Maybe Lilu, VirtualSMC and NVMe fix have to be enabled always)