- Joined
- Aug 2, 2012
- Messages
- 74
- Motherboard
- Gigabyte GA-H61M-D2-B3
- CPU
- G530
- Graphics
- GT 210
- Mobile Phone
Try adding npci=0x2000 or npci=0x3000.
I solved this issue on my parents' build by using "GraphicsEnabler=Yes, IGPEnabler=No" at boot. Just GraphicsEnabler=Yes was not enough to do the trick for me. Hope this helps someone else in the same situation.
Wanted to let people know that this solution worked for me.I solved this issue on my parents' build by using "GraphicsEnabler=Yes, IGPEnabler=No" at boot. Just GraphicsEnabler=Yes was not enough to do the trick for me. Hope this helps someone else in the same situation.
i was able to reach the startup on my tosh sattelite laptop with these settings "-x GraphicsEnabler=No IGPEnabler=No" but now no mousepad control.
I solved this issue on my parents' build by using "GraphicsEnabler=Yes, IGPEnabler=No" at boot. Just GraphicsEnabler=Yes was not enough to do the trick for me. Hope this helps someone else in the same situation.
Using Asus g53 with 4xx nvedia, I have used nv_disable=1 and it loaded the setup/install screen, but yet everytime I have to boot from flash with nv_disable=1 typed before loading....any advise and I hope it helped.
I solved this issue on my parents' build by using "GraphicsEnabler=Yes, IGPEnabler=No" at boot. Just GraphicsEnabler=Yes was not enough to do the trick for me. Hope this helps someone else in the same situation.
-v PCIRootUID=0 GraphicsEnabler=Yes IGPEnabler=No