Contribute
Register

Laptop error [IOBluetoothHCIController][start] -- completed

Status
Not open for further replies.
OK, i had red the guide. I dont know if i have fully understud it.

At the end i come to -v -x IGPlatformID=01660008 nv_disable=1 dart=0
but that doesnt seem to be right.

I've tired also IGPEnabler=Yes instead of IGPlatformID bcs. of Yosemite.


Sry but it is my first time installing it on real Hardware, and not in a VM.
I dont know what i should try next, sry. :banghead:
 
renewels said:
OK, i had red the guide. I dont know if i have fully understud it.

At the end i come to -v -x IGPlatformID=01660008 nv_disable=1 dart=0
but that doesnt seem to be right.

I've tired also IGPEnabler=Yes instead of IGPlatformID bcs. of Yosemite.


Sry but it is my first time installing it on real Hardware, and not in a VM.
I dont know what i should try next, sry. :banghead:
Click to expand...

Because of your high resolution screen you may require 01660004, 01660008, or 01660009. The only way to know is to try them all. Also, watch out for "Local APIC" panic. It happens relatively early and scrolls off the screen. If you have that you'll need cpus=1. Most of the time, there is no need for -x. Also watch for USB errors.

So...

IGPlatformID=01660004 nv_disable=1 dart=0 cpus=1 -v

Then try each of the IGPlatformID values.

And in any case, be patient. Booting the OS X installer is not quick.

That said, you should really be using Clover since ASUS machines cannot boot legacy to an HDD partitioned as GPT. See here: http://www.tonymacx86.com/yosemite-...oting-os-x-installer-laptops-clover-uefi.html
 
thx for all!

now i stuck at fakesmc v.....

I dont want to use clover bcs. it will change my bios, or not?

thx
 
IMG_0308[1].jpg
 
Thank you so much! Now i am in the Graphical installer, in about 15 Minutes i will know if i can boot it! :thumbup::D
 
renewels said:
Thank you so much! Now i am in the Graphical installer, in about 15 Minutes i will know if i can boot it! :thumbup::D
Click to expand...

Please note that copying GenericUSBXHCI.kext was part of the instructions at the link provided in post #26...
 
Yeah i've done it on the first USB-Stick, but i made a second one with chameleon and then it looks like i've forgotten it :(
 
After Installation, i boot from the USB Stick into the yosemite with the same boot-options but now i stuck at this point:

IMG_0310[1].jpg

should i install clover on this hdd?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top