Contribute
Register

Laptop error [IOBluetoothHCIController][start] -- completed

Status
Not open for further replies.
Joined
Mar 9, 2014
Messages
21
Motherboard
Asus Maximus VI Formula
CPU
i7-4770K
Graphics
RX 5700 TX
Mobile Phone
  1. iOS
Hi,

this is my secondthis is my second HACKINTOSH BUILD.

Now I have problem "[IOBluetoothHCIController][start] -- completed"
photo 4-1.jpg

The USB flashDrive i made by the Guide:
http://www.tonymacx86.com/374-unibeast-install-os-x-mavericks-any-supported-intel-based-pc.html

I did changes in the BIOS - those who I managed to find
photo 1-1.jpgphoto 2-1.jpgphoto 3-1.jpg

Used all Boot flags I could find on the internet

-v -x
-v -x GraphicsEnabler=Yes
-v -x GraphicsEnabler=No
-v -x cpus=1
-v -x maxmem=4096
-v -x dart=0
-v -x IGPEnabler=No
-v -x IGPEnabler=Yes
-v -x IGPEnabler=N GraphicsEnabler=N dart=0 UseKernelCache=N -f
-v -x GraphicsEnabler=No "GraphicsMode"="1440x900x32@60"
-v -x GraphicsEnabler=Yes "GraphicsMode"="1440x900x32@60"
-v -x GraphicsEnabler=No "GraphicsMode"="1440x900x32"
-v -x GraphicsEnabler=Yes "GraphicsMode"="1440x900x32"
-v -x IGPEnabler=No GraphicsEnabler=No
-v -x IGPEnabler=No GraphicsEnabler=Yes
-v -x IGPEnabler=Yes GraphicsEnabler=No
-v -x IGPEnabler=Yes GraphicsEnabler=Yes
-v -x ncpi=0x300

All Boot flags i tried lead to the same result - [IOBluetoothHCIController][start] -- completed

CPU - Intel Core i7-3632QM
GPU - NVIDIA® GeForce® GT 650M 2GB GDDR5 VRAM
RAM - 8 GB 1600MHz
Display - 15.6-inch 2880 x 1620

please help
 
Hi,

...

CPU - Intel Core i7-3632QM
GPU - NVIDIA® GeForce® GT 650M 2GB GDDR5 VRAM
RAM - 8 GB 1600MHz
Display - 15.6-inch 2880 x 1620

please help

Does the laptop have both nvidia and intel or just nvidia? Use 'lspci -nn' in Linux Terminal to find out for sure.

The high resolution display is going to be challenging in any case...

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

System: manufacturer/model
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx). For a laptop, these details are important and affect critical installation procedures.
 
Does the laptop have both nvidia and intel or just nvidia? Use 'lspci -nn' in Linux Terminal to find out for sure.

The high resolution display is going to be challenging in any case...

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

System: manufacturer/model
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx). For a laptop, these details are important and affect critical installation procedures.

Hi

System: ASUS UX51VZ
CPU: i7 3632QM/ HM77
Graphics: HD4000 and GT650M, 2880x 1620
 
OK

Whit boot Flags -v -x nv_disable=1 i I managed to welcome screen

But no mouse or keyboard support.:(

Did you remember to select "Laptop Support" when you created your USB installer with Unibeast?

Otherwise... no PS2 support... Use a USB keyboard/mouse if you don't want to re-create the USB.
 
Did you remember to select "Laptop Support" when you created your USB installer with Unibeast?

Otherwise... no PS2 support... Use a USB keyboard/mouse if you don't want to re-create the USB.

Yes, it's all my fault.:(
I will re-create the USB and update my progress.

Thank you very much for now:headbang::clap:
 
Did you remember to select "Laptop Support" when you created your USB installer with Unibeast?

Otherwise... no PS2 support... Use a USB keyboard/mouse if you don't want to re-create the USB.

Hi, RehabMan

I can't recreate the usb, so i plugged in mouse and keyboard.


What is the next step?


MultiBeast?


Can you gave me some advice what i need to install.

Sound: Realtek ALC663
Lan: Qualcomm Ahteros AR8151
Wi-fi/Bluetooth: Intel Centrino Advanced-N 6235 AGN 2x2 HMC WiFi/ Bluetooth
SATA RAID Controler: Intel 82801HB(M) ICH(M)

Sorry for my English.
 
Hi, RehabMan

I can't recreate the usb, so i plugged in mouse and keyboard.


What is the next step?


MultiBeast?

Starting w/ Multibeast: http://www.tonymacx86.com/mavericks...-sandy-bridge-ivy-bridge-haswell-laptops.html

Can you gave me some advice what i need to install.

Sound: Realtek ALC663
Lan: Qualcomm Ahteros AR8151
Wi-fi/Bluetooth: Intel Centrino Advanced-N 6235 AGN 2x2 HMC WiFi/ Bluetooth
SATA RAID Controler: Intel 82801HB(M) ICH(M)

AR8151 might be supported by Atheros Ethernet driver in Multibeast.

Intel WiFi is not supported. Compatible chipsets and the procedures for making them work are covered here: http://www.tonymacx86.com/network/104850-guide-airport-pcie-half-mini-v2.html

If your SATA is in RAID mode, make sure to install 3rd party SATA driver.

Audio: Best result with patched AppleHDA. Google 'patch AppleHDA guide'. Search for suitable AppleHDA or patch it yourself. Apply appropriate DSDT patches.

DSDT patches you need for AppleHDA: https://github.com/RehabMan/Laptop-DSDT-Patch
Apply: "Audio Layout 12" (change layout-id from 12 to the layout-id used by the patched AppleHDA)
Apply: "IRQ Fix"
 
Starting w/ Multibeast: http://www.tonymacx86.com/mavericks...-sandy-bridge-ivy-bridge-haswell-laptops.html



AR8151 might be supported by Atheros Ethernet driver in Multibeast.

Intel WiFi is not supported. Compatible chipsets and the procedures for making them work are covered here: http://www.tonymacx86.com/network/104850-guide-airport-pcie-half-mini-v2.html

If your SATA is in RAID mode, make sure to install 3rd party SATA driver.

Audio: Best result with patched AppleHDA. Google 'patch AppleHDA guide'. Search for suitable AppleHDA or patch it yourself. Apply appropriate DSDT patches.

My battery indicator is not visible and so on.....:(

DSDT patches you need for AppleHDA: https://github.com/RehabMan/Laptop-DSDT-Patch
Apply: "Audio Layout 12" (change layout-id from 12 to the layout-id used by the patched AppleHDA)
Apply: "IRQ Fix"

OMG

I'm so confused right now, I started reading the posts in the forum you sent me. no idea what it is about there.

I'm a complete newbie, it seems completely incomprehensible to me.

I can tell you how far I have got now.

I managed to install PS/2 Keyboard/Mice and Trackpads - big success for me.

My LanCard works without installing anything from MultiBeast as well as the Bluetooth.

What about my GPU and Display i can't boot without boot Flag nv_disable=1 and Mavericks recognises Nvidia Chip Model 3 MB graphics and the resolution is 1024 x 768
 
Status
Not open for further replies.
Back
Top