Contribute
Register

Laptop error [IOBluetoothHCIController][start] -- completed

Status
Not open for further replies.
K0kall said:
Yes, A did, but make some changes by my self last night and.....had to start over.

I download the Mavericks from App Store 10.9.4 and with UniBeats 4.0.2 make new one, and start from the beginning.

Now I Have clean installation on my laptop.

View attachment 101185
Click to expand...

Above screen shot shows first good step... Next step would be to install a correct smbios... your CPU is Ivy, so you should be using an Ivy laptop smbios. Then custom SSDT, the DropSSDT=Y, GenerateP/CStates=N, as described in the PM post.
 
RehabMan said:
Above screen shot shows first good step... Next step would be to install a correct smbios... your CPU is Ivy, so you should be using an Ivy laptop smbios. Then custom SSDT, the DropSSDT=Y, GenerateP/CStates=N, as described in the PM post.
Click to expand...


You mean the fresh installation maybe?

So, should I press install and then use Chameleon Wizard?
 
Desktop
Maximus VI Formula |  i7 4790K |  GeForce GTX 560
K0kall said:
You mean the fresh installation maybe?

So, should I press install and then use Chameleon Wizard?
Click to expand...

Yes, power management is the first thing you should do after a fresh install.

Yes, please read and work through the entire post.
 
Hello again,
I succeeded with the power management, but now I'm struggling with the GPU. As I see it is NVIDIA GeForce GT650M only. I have no Intel HD400, not in the BIOS mentioned, even booted linux, just to see that the HD400 is not listed in the "lspci -nn" list.

I'm reading a lot of posts here and around, I'm trying things, including the CUDA drivers, but without any success. Can you give a piece of advice, what could I also try to get the GeForce GT650M working..?

Thanks a lot
 
Desktop
Maximus VI Formula |  i7 4790K |  GeForce GTX 560
Hi,

I have the same problem, but i cant solve it with your suggested Boot-Options.

I have also a UX51VZ but it's the A version, with 1080p and some smal differences.

thx for help,

Rene
 
Thx for reply!

I've tried it with -v -x nv_disable=1 dart=0

and the other ones in this thread, nothing seems to work.

And the other options doesnt seem to help me.

Here is a screenshot:
IMG_0307.jpg

Thx for your Help ;)
 
renewels said:
Thx for reply!

I've tried it with -v -x nv_disable=1 dart=0

and the other ones in this thread, nothing seems to work.

And the other options doesnt seem to help me.

Here is a screenshot:
View attachment 114555

Thx for your Help ;)
Click to expand...

You did not read the guide very carefully...

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.
 
Hi

i've updated my signature.

And i've tried GraphicsEnabler=Yes and i only get a Nvidia error instantly
 
renewels said:
Hi

i've updated my signature.

And i've tried GraphicsEnabler=Yes and i only get a Nvidia error instantly
Click to expand...

Read the guide I posted previously very carefully.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top