- Joined
- Apr 15, 2012
- Messages
- 3
- Motherboard
- Gigabyte GA Z77X-UP5 TH
- CPU
- Intel Core i7 3770
- Graphics
- ASUS GTX 760 2GB OC (SLi)
- Mac
- Classic Mac
- Mobile Phone
Hey Guys and Girls...
Firstly wanna thank tonymacx86 for everything they've done here im in absolute awe...
This is my first post so please correct me if im doing anything incorrectly.
My Build:
CPU: Intel Core i7 3770 (not K)
Motherboard: Gigabyte GA Z77X-UP5 TH
Graphics: 2x ASUS GTX 760 2GB OC (SLi)
SSD: Crucial C400 256GB
RAM: 16GB G-Skill Ram (soon to be 32GB)
WiFi: TP-LINK WDN4800
Bluetooth: IOGEAR Bluetooth 4.0 GBU521
I think ive listed all that's needed in terms of knowing what my system requires...if not please tell me
So i removed the 2 graphics card for the install and installed fine, i then kept the graphics cards out after installing multibeast (i used DSDTFree).
Once i rebooted i couldnt boot into my OSx install, i did not run any boot flags, the apple symbol came up with scrolling circle and sat there for 15-20 minutes no error.
I then rebooted and tried -X -V and it loaded into safe mode fine.
I reconnected my 2 graphics cards and booted into safe mode and was able to have my 3 monitors up and running.
I tried running multibeast (i used DSDTFree) again and used all the same settings as someone on here with the same board and same card as me (his was working) except this time i changed the ID to Mac Pro 5,1 instead of 3,1....to which i received a kernel panic.
I rebooted into safe mode and ran multibeast (i used DSDTFree) again changing it back to 3,1 and now i am back to not being able to boot unless in safe mode and the scrolling circle in normal mode, but no kernel panic...ill label my screenshots below.
Also...as my motherboard is a UEFI Gigabyte one...when i go to my boot options i have my drive as normal or UEFI...if i use UEFI it doesnt boot it bypasses the chameleon loader and loads into my next bootable SSD (WIN7) is that normal?
I would appreciate any help and positive criticism, im not a noob to this its my 3rd hackint0sh since core2duo days when we had to input kexts and use dsdt files etc...please dont post anything off topic as i am hoping this will be a thread others can come to that have similar issues to myself
*sorry for the excessive attachments...wanna give all the info i can and i have no idea how to post the pic in the thread itself*
Firstly wanna thank tonymacx86 for everything they've done here im in absolute awe...
This is my first post so please correct me if im doing anything incorrectly.
My Build:
CPU: Intel Core i7 3770 (not K)
Motherboard: Gigabyte GA Z77X-UP5 TH
Graphics: 2x ASUS GTX 760 2GB OC (SLi)
SSD: Crucial C400 256GB
RAM: 16GB G-Skill Ram (soon to be 32GB)
WiFi: TP-LINK WDN4800
Bluetooth: IOGEAR Bluetooth 4.0 GBU521
I think ive listed all that's needed in terms of knowing what my system requires...if not please tell me
So i removed the 2 graphics card for the install and installed fine, i then kept the graphics cards out after installing multibeast (i used DSDTFree).
Once i rebooted i couldnt boot into my OSx install, i did not run any boot flags, the apple symbol came up with scrolling circle and sat there for 15-20 minutes no error.
I then rebooted and tried -X -V and it loaded into safe mode fine.
I reconnected my 2 graphics cards and booted into safe mode and was able to have my 3 monitors up and running.
I tried running multibeast (i used DSDTFree) again and used all the same settings as someone on here with the same board and same card as me (his was working) except this time i changed the ID to Mac Pro 5,1 instead of 3,1....to which i received a kernel panic.
I rebooted into safe mode and ran multibeast (i used DSDTFree) again changing it back to 3,1 and now i am back to not being able to boot unless in safe mode and the scrolling circle in normal mode, but no kernel panic...ill label my screenshots below.
Also...as my motherboard is a UEFI Gigabyte one...when i go to my boot options i have my drive as normal or UEFI...if i use UEFI it doesnt boot it bypasses the chameleon loader and loads into my next bootable SSD (WIN7) is that normal?
I would appreciate any help and positive criticism, im not a noob to this its my 3rd hackint0sh since core2duo days when we had to input kexts and use dsdt files etc...please dont post anything off topic as i am hoping this will be a thread others can come to that have similar issues to myself
*sorry for the excessive attachments...wanna give all the info i can and i have no idea how to post the pic in the thread itself*
Attachments
-
Boot -v2.JPG302.7 KB · Views: 134
-
Boot -v1.JPG437.9 KB · Views: 157
-
Boot -v.JPG130.3 KB · Views: 161
-
Boot-nonUEFI.JPG189.2 KB · Views: 115
-
multibeast-successful.JPG193.4 KB · Views: 111
-
multibeast-config.JPG205.8 KB · Views: 127
-
multibeat-sysprofile.JPG184.2 KB · Views: 106
-
multibeast-cpu.JPG146.9 KB · Views: 114
-
multibeast-bootoptions.JPG241.6 KB · Views: 115
-
multibeast-system.JPG213.4 KB · Views: 102
-
multibeast-bootloader.JPG136.2 KB · Views: 138
-
multibeast-network.JPG148.7 KB · Views: 120
-
multibeast-misc.JPG200 KB · Views: 121
-
multibeast-graphics.JPG164.5 KB · Views: 123
-
multibeast-disk.JPG221.1 KB · Views: 116
-
multibeast-audio.JPG247.5 KB · Views: 134
-
multibeast-DSDTfree.JPG240.8 KB · Views: 142
-
Specs.JPG251.2 KB · Views: 139
-
multibeast-preinstall.JPG197.6 KB · Views: 125
-
BootSafeMode.JPG171.2 KB · Views: 150
-
Kernel Panic 5,1.JPG281.6 KB · Views: 149