Intel HD Graphics Framebuffer Edits - Desktop

[clickerpw]

Hi guys.i have low fps (40 hz) first boot after power off
next i reboot mac os and receive 60 hz.

first boot

reboot

HD530 via HDMI
High Sierra

toleda
can you help me?
thanks.

 

[toleda]

low fps (40 hz) first boot after power off

Monitor problem.

 

[clickerpw]

Monitor problem

But if I boot windows 7 then have not this problem

 

[clickerpw]

And it looks like qe/ci not working

add: first(cold) start Windows 7 -> reboot in Mac OS-> Works!!!
first start Mac OS -> Artifacts -> reboot in Mac OS -> Works!!!
first start Mac OS -> Artifacts -> change resolution in System Pref to 1920x1080 -> change resolution in System Pref to 2560x1440 -> Works!!!


add2: Yes, do not work acceleration when boot in 2560x1440 mode.

what i can edit in config file for qe/ci work

 

[toleda]

But if I boot windows 7 then have not this problem

Why is that relevant?

what i can edit in config file for qe/ci work

Post #588/IOReg shows Intel Accelerator, working

 

[fkpwolf]

I have asrock B360M-HDV + i5 8400(uhd630). When booting at 70%, screen go to sleep mode. The screen connect to HDMI port since the board didn't have DP port. I have to disable Intel inject, login and export ioreg file.

Try many different settings. No lucky. I follow this guide for hd630: use intelgraphicsfixup and ig-platform-id=0x59120000.

 

[toleda]

have to disable Intel inject, login and export ioreg file.

Post #1/Requirements/1. Recognized Intel HD Graphics ...
Off topic

I follow this guide for hd630

Post to linked thread or Graphics Forum.

 

[cybernation]

I'm having issues getting my dual monitor setup working. When i use the monitors seperatly then they are working fine, when used at the same time the monitor connected via hdmi is showing a disorted screen. Hopefully someone could have a look at the attached files (I think I attached all needed files) and pinpoint what i'm doing wrong, cause somehow i guess i'm doing something wrong :S.

I'm using the following hardware/software:

Mobo: Asrock Z87E-ITX
Bios version: 2.5
Proc: core i5 4670T
Graphics: Intel hd 4600

I have 2 monitors connected:

On the hdmi port: ASUS PB278
On the dvi port: E228WFP

I used method #1, see ouput from the audio_cloverHDMI-130_v0.8.command below:

File: audio_cloverHDMI-130_v0.8.command
Release Mode
EFI partition is mounted
No HDMI audio codec(s) detected, continue (y/n): y
HDMI audio codec(s)
HD4600+ HDMI audio is not enabled
Install SSDT-HDMI-HD4600+ HDMI audio ssdt (y/n): y
Download SSDT-HDMI-HD4600+ ...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 44840 100 44840 0 0 139k 0 --:--:-- --:--:-- --:--:-- 139k
/Volumes/EFI/EFI/CLOVER/ACPI/patched/SSDT-HDMI-HD4600+ installed
Two displays connected, proceeding
Confirm DP to HDMI connector edit on port 0x5 (y/n): y
Patch port 0x5
Confirm DP to HDMI connector edit on port 0x7 (y/n): y
Patch port 0x7
Download HD4600+ HDMI audio connector edits ...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 2122 100 2122 0 0 7897 0 --:--:-- --:--:-- --:--:-- 7917
HDMI audio edited /Volumes/EFI/EFI/CLOVER/config.plist installed
Install AMD/Nvidia HDMI audio (y/n): n


port 0x7 is HDMI, port 0x5 is DVI

 

[toleda]

used method #1

ssdt is disabled, remove config.plist/ACPI/DSDT/Patches/Item 0 (change GFX0 to IGPU)
framebuffer patches are not loading, not sure why

Restart and reply with new files including Clover boot log and Terminal output for: diskutil list

 

[cybernation]

ssdt is disabled, remove config.plist/ACPI/DSDT/Patches/Item 0 (change GFX0 to IGPU)
framebuffer patches are not loading, not sure why

Restart and reply with new files including Clover boot log and Terminal output for: diskutil list

Toleda, thanks for the support so far!. Attached are the new files