Like thisI am lost when editing with plisteditor. You want me to remove all Devices block and paste yours?
Sadly, 0x19120000 gives me KP while 0x12345678 doesn't.
ig-p-id 0x12345678 is just a false ID because the chosen 0x1912000 does not seem to be the right one for your Intel HD 530. With that ig-p-id you will be able to get back to Desktop but won't get the full QE/CI despite having Lilu and WhateverGreen.kext in the /L/E you had installed.I got the part from your conf.plist and pasted into my config.plist, however Properties don't show when I open with Clover Configurator.
Glad to know you solved the problem.Oddly, 0x193b0005 helped me, as per the suggestion of a FB group fellow. I'm now getting 1536 MB. Thanks.
- Your uploaded CLOVER shows its config.plist needs to be edited and saved to use it to boot.
- I suggest trying the following changes and rebooting in Verbose Mode and uploading image for any problem
- config.plist_Boot :
- no need for nv_disable =1 ; you have no Nvidia card at all . No harm in having it but it is not needed.
- Try adding,
- - disablegfxfirmware -lilubetall -alcbeta dart=0 -v (-v you can remove once no problem occurs during boot)
- config.plist _Devices :
- Fake ID IntelGFX=0x19128086
- Audio Inject =2 [√]AFGlowPowerState [√] ResetHDA
- config.plist _Graphics :
- [√]Inject Intel
- ig-platform-id : 0x19120000
- config.plist _Rt Variables
- CsrActiveconfig =0x67
- config.plist_SMBIOS
- Product Model:iMac 14, 2 or 18,1
From the tonymacx86 rules section:Elder ~ can share your installation package?
Can I communicate with you in Chinese?
getFrom the tonymacx86 rules section:
- All posts must be made in English. Any and all posts in other languages will be deleted.
- Posts cannot contain email addresses or any other form of contact information.