Installing Sierra on Asus ZenBook UX410UA

[ThangHach]

Thanks RehabMan
let's me recheck

 

[Pulek]

Hi Perslucht did you found a resolution for touchpad? I was try with newest Voodoo2C V2.0.1 and touch pad don't work
Anyone have any idea?

 

[F-Didi]

Pulek, my UX410UQK trackpad works now.
I put the VoodooI2C.kext and the VoodooI2CHID.kext to /L/E (Clover/Kexts/Other Directory work too).
In DSDT i have installed the "Windows10_Patch" and the "GPIO Controller Enable Patch", but not the "Controllers I2C Controllers Patch". Then i patch it like here is written: https://voodooi2c.github.io/#GPIO Pinning/GPIO Pinning.
My device in ioreg is ETPD and the Pin is 6D, so i insert pin 0x55. But it didn't work for me, only the trackpad was show in settings. I tried the pin 0x17 and after 2 restarts it work like it should!

 

[Pulek]

Pulek, my UX410UQK trackpad works now.
I put the VoodooI2C.kext and the VoodooI2CHID.kext to /L/E (Clover/Kexts/Other Directory work too).
In DSDT i have installed the "Windows10_Patch" and the "GPIO Controller Enable Patch", but not the "Controllers I2C Controllers Patch". Then i patch it like here is written: https://voodooi2c.github.io/#GPIO Pinning/GPIO Pinning.
My device in ioreg is ETPD and the Pin is 6D, so i insert pin 0x55. But it didn't work for me, only the trackpad was show in settings. I tried the pin 0x17 and after 2 restarts it work like it should!

Hi F-Didi - on my DSDT.aml file from Clover on pendrive i make patch GPIO controller Enable patch, but i can't make make WINDOWS10_Patch - its look like i have done this before. After trying make GPIO pinnig i have problem i can't find ETDP. How you find it to change from 6D on 0x17?

 

[F-Didi]

Do you have the device ETPD in ioreg, too? Then you can find it if you type "ETPD" in the search box in MacIASL at the bottom left corner. Or you can upload your DSDT, i look for it.

 

[Pulek]

Do you have the device ETPD in ioreg, too? Then you can find it if you type "ETPD" in the search box in MacIASL at the bottom left corner. Or you can upload your DSDT, i look for it.

i have ETPD but in ioreg i can't find it. i will upload for you DSDT, maybe you can change it for me Please make 2 files - 0x55 and 0x17 and i will test both Thank you for help.

 

[F-Didi]

i have ETPD but in ioreg i can't find it. i will upload for you DSDT, maybe you can change it for me Please make 2 files - 0x55 and 0x17 and i will test both Thank you for help.

You had 2 Windows-Patches in it, now there is only the Windows 10 Patch. And you didn't make GPIO-Pinning like in this documentation: https://voodooi2c.github.io/#GPIO Pinning/GPIO Pinning
Try it now, before you must rename the files to DSDT.aml.

 

[Pulek]

You had 2 Windows-Patches in it, now there is only the Windows 10 Patch. And you didn't make GPIO-Pinning like in this documentation: https://voodooi2c.github.io/#GPIO Pinning/GPIO Pinning
Try it now, before you must rename the files to DSDT.aml.

THANKS YOU! At last trackpad working but I have problem with touch and click - when i touch trackpad to click then mouse move and can't click, sometimes also little lagging. How about you? Yours work perfect?

 

[F-Didi]

It's the same by me. It works but it's a little bit spongy. I've read, that by other users it's the same with this kind of trackpad.

 

[Pulek]

Oh then we need to wait for better voodoo drivers.

EDITED:
I have problem with EFI partition. When i copy folder BOOT and CLOVER on EFI partition then i cant start PC with clover.
I need to use clover on USB
I have SSD 180GB and make 2 partition - 70GB for OSX - and install Sierra first, and second partition for Windwos 10 - i install it later (after OSX).
And when i start PC then windows 10 automaticly start, can't boot clover. How to do this to work?