Contribute
Register

i5 5500U + HD Graphics 5500 Wake after Sleep: Screen backlight on but no video

Status
Not open for further replies.
Joined
Sep 15, 2015
Messages
12
Motherboard
Dell 7348
CPU
i7-5500U
Graphics
HD 5500
Hey all :) me again! :p

I'm having some success with my Dell Inspiron 13 7000 Series (7348) laptop. I hope to have all ready so that I can make a guide later (both for you all and for me in case I reinstall and forget the entire procedure XD). It's been quite a trip, but satisfactory.

I'm having an issue now though. I have created my own DSDT (although I admit I don't have much knowledge about it), patched it with ReHabMan's most common patches (including the WAK0 v2 patch) and a few SSDTs (related to GFX, Temperature Sensors (I guess?) and CPU C/P states (I think so)). I don't think these are causing any effect, but anyways...

After the hack is set to sleep by the menu option or inactivity, when it goes back on, the screen backlight comes up, but nothing is displayed on the screen, just, plain black screen.

I have uploaded the most important files here, notably DSDT, SSDT (I'm a noob regarding these two but I did my best to follow ReHabMan's guide and used his MaciASL tools), Clover's config.plist and IOReg in case it helps.

For kexts, I have these installed:
Screen Shot 2016-11-19 at 17.09.34.png


Any help is greatly appreciated! If somebody needs more info, logs, etc. just ask! :)
 

Attachments

  • config.plist
    8.7 KB · Views: 233
  • IOReg.zip
    743 KB · Views: 95
  • DSDT and SSDTs.zip
    42.6 KB · Views: 96
Hey all :) me again! :p

I'm having some success with my Dell Inspiron 13 7000 Series (7348) laptop. I hope to have all ready so that I can make a guide later (both for you all and for me in case I reinstall and forget the entire procedure XD). It's been quite a trip, but satisfactory.

I'm having an issue now though. I have created my own DSDT (although I admit I don't have much knowledge about it), patched it with ReHabMan's most common patches (including the WAK0 v2 patch) and a few SSDTs (related to GFX, Temperature Sensors (I guess?) and CPU C/P states (I think so)). I don't think these are causing any effect, but anyways...

After the hack is set to sleep by the menu option or inactivity, when it goes back on, the screen backlight comes up, but nothing is displayed on the screen, just, plain black screen.

I have uploaded the most important files here, notably DSDT, SSDT (I'm a noob regarding these two but I did my best to follow ReHabMan's guide and used his MaciASL tools), Clover's config.plist and IOReg in case it helps.

For kexts, I have these installed:
View attachment 221529

Any help is greatly appreciated! If somebody needs more info, logs, etc. just ask! :)

Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):
Code:
kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda

Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):
Code:
sudo touch /System/Library/Extensions && sudo kextcache -u /

Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.
 
Hello! Thanks for your prompt answer! :)

I've attached the required files too ( I've seen that post before :p )

acpiplat:
Code:
   13    2 0xffffff7f833e4000 0x60000    0x60000    com.apple.driver.AppleACPIPlatform (5.0) D748FA50-380C-3F0D-BAD9-EB7A15848EA8 <12 11 7 6 5 4 3 1>

appleintelcpu:
(nothing)

applelpc:
Code:
  111    0 0xffffff7f82b44000 0x3000     0x3000     com.apple.driver.AppleLPC (3.1) F51595F0-F9B1-3B85-A1C3-F984DAD4107E <110 12 5 4 3>

applehda: (I am using a patched AppleHDA.kext found here, which has given me full working audio)
Code:
  108    1 0xffffff7f82fcf000 0x1d000    0x1d000    com.apple.driver.AppleHDAController (276.26) D0953002-6091-376F-8E0F-33B65F42CEF9 <107 106 77 12 7 6 5 4 3 1>
  119    0 0xffffff7f83151000 0xb4000    0xb4000    com.apple.driver.AppleHDA (276.26) 7611D43E-12FE-3228-A6D3-9C99A5D030CC <118 108 107 106 81 77 6 5 4 3 1>
  121    0 0xffffff7f82fcb000 0x2000     0x2000     com.apple.driver.AppleHDAHardwareConfigDriver (276.26) D58BD3DA-EEDA-3845-9094-D33CB6E20BCE <4 3>

kextcache stuff:
Code:
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Trackpad.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Mouse.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Keyboard.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Controller.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Broadcom_WiFi.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmPatchRAM2.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmFirmwareData.kext
kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext AppleHDAHardwareConfigDriver.kext
kext-dev-mode allowing invalid signature -67061 0xFFFFFFFFFFFEFA0B for kext AppleHDA.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext PinConfigs.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext AppleALC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBatteryManager.kext
KernelCache ID: CCB93139F5EDDE957CDA471F117AA621
symlink("/System/Library/PrelinkedKernels/prelinkedkernel", "/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache") failed 17 (File exists) <createPrelinkedKernel 2795>

I'll be waiting for your feedback! thanks for taking the time to help me, it's greatly appreciated :)
 

Attachments

  • CLOVER.zip
    1.6 MB · Views: 99
  • Dragon's MacBook Pro.ioreg.zip
    738.8 KB · Views: 75
Last edited:
Hello! Thanks for your prompt answer! :)

I've attached the required files too ( I've seen that post before :p )

acpiplat:
Code:
   13    2 0xffffff7f833e4000 0x60000    0x60000    com.apple.driver.AppleACPIPlatform (5.0) D748FA50-380C-3F0D-BAD9-EB7A15848EA8 <12 11 7 6 5 4 3 1>

appleintelcpu:
(nothing)

applelpc:
Code:
  111    0 0xffffff7f82b44000 0x3000     0x3000     com.apple.driver.AppleLPC (3.1) F51595F0-F9B1-3B85-A1C3-F984DAD4107E <110 12 5 4 3>

applehda: (I am using a patched AppleHDA.kext found here, which has given me full working audio)
Code:
  108    1 0xffffff7f82fcf000 0x1d000    0x1d000    com.apple.driver.AppleHDAController (276.26) D0953002-6091-376F-8E0F-33B65F42CEF9 <107 106 77 12 7 6 5 4 3 1>
  119    0 0xffffff7f83151000 0xb4000    0xb4000    com.apple.driver.AppleHDA (276.26) 7611D43E-12FE-3228-A6D3-9C99A5D030CC <118 108 107 106 81 77 6 5 4 3 1>
  121    0 0xffffff7f82fcb000 0x2000     0x2000     com.apple.driver.AppleHDAHardwareConfigDriver (276.26) D58BD3DA-EEDA-3845-9094-D33CB6E20BCE <4 3>

kextcache stuff:
Code:
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Trackpad.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Mouse.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Keyboard.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Controller.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Broadcom_WiFi.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmPatchRAM2.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmFirmwareData.kext
kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext AppleHDAHardwareConfigDriver.kext
kext-dev-mode allowing invalid signature -67061 0xFFFFFFFFFFFEFA0B for kext AppleHDA.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext PinConfigs.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext AppleALC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBatteryManager.kext
KernelCache ID: CCB93139F5EDDE957CDA471F117AA621
symlink("/System/Library/PrelinkedKernels/prelinkedkernel", "/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache") failed 17 (File exists) <createPrelinkedKernel 2795>

I'll be waiting for your feedback! thanks for taking the time to help me, it's greatly appreciated :)

Power management is not implemented.

https://www.tonymacx86.com/threads/guide-native-power-management-for-laptops.175801/
 
Thanks for your answer!

Interesting, I thought I had Power Management enabled with the SSDTs I generated following your guide regarding the MaciASL procedure. I have followed that guide, however, even though it seems it's enabled, the display still dies after wake from sleep.

Here's the output of the ssdtPRGen.sh and the AppleIntelInfo.kext (dat file) in case you see something is missing?

ssdtPRGeh.sh:
Code:
ssdtPRGen.sh v0.9  Copyright (c) 2011-2012 by † RevoGirl
             v6.6  Copyright (c) 2013 by † Jeroen
             v21.1 Copyright (c) 2013-2016 by Pike R. Alpha
-----------------------------------------------------------
Bugs > https://github.com/Piker-Alpha/ssdtPRGen.sh/issues <

System information: Mac OS X 10.12 (16A323)
Brandstring: "Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz"

Version: models.cfg v160 / Broadwell.cfg v151


Scope (_PR_) {222 bytes} with ACPI Processor declarations found in DSDT (ACPI 1.0 compliant)

Notice: The LFM frequency in Mac-E43C1C25D4880AD6.plist is set to 1300MHz!
    This problem can be fixed with help of freqVectorsEdit.sh from:
    https://github.com/Piker-Alpha/freqVectorsEdit.sh

Generating ssdt.dsl for a 'MacBookPro12,1' with board-id [Mac-E43C1C25D4880AD6]
Broadwell Core i7-5500U processor [0x306D4] setup [0x0706]
With a maximum TDP of 15 Watt, as specified by Intel
Number logical CPU's: 4 (Core Frequency: 2400 MHz)
Number of Turbo States: 6 (2500-3000 MHz)
Number of P-States: 23 (800-3000 MHz)
Adjusting C-States for detected (mobile) processor
Injected C-States for CPU0 (C1,C3,C6,C7)
Injected C-States for CPU1 (C1,C2,C3,C6,C7)
Warning: 'cpu-type' may be set improperly (0x0706 instead of 0x0906)
     - Clover users should read https://clover-wiki.zetam.org/Configuration/CPU#cpu_type
Compiling: ssdt_pr.dsl
Intel ACPI Component Architecture
ASL+ Optimizing Compiler version 20160422-64(RM)
Copyright (c) 2000 - 2016 Intel Corporation

ASL Input:     /Users/dragon/Library/ssdtPRGen/ssdt.dsl - 299 lines, 10350 bytes, 48 keywords
AML Output:    /Users/dragon/Library/ssdtPRGen/ssdt.aml - 1794 bytes, 16 named objects, 32 executable opcodes

Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 0 Optimizations

Do you want to copy /Users/dragon/Library/ssdtPRGen/ssdt.aml to /Extra/ssdt.aml? (y/n)? n
Do you want to open ssdt.dsl (y/n)? n

AppleIntelInfo.kext:
Code:
Last login: Sat Nov 19 19:09:55 on console
MacBook-Pro-de-Dragon:~ dragon$ cd Desktop/
MacBook-Pro-de-Dragon:Desktop dragon$ sudo -s
Password:
bash-3.2# kextload AppleIntelInfo.kext
bash-3.2# cat /tmp/AppleIntelInfo.dat

AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved

Settings:
------------------------------------
logMSRs............................: 1
logIGPU............................: 1
logIntelRegs.......................: 1
logCStates.........................: 1
logIPGStyle........................: 1
InitialTSC.........................: 0x4bd7763b55
MWAIT C-States.....................: 286531872

Model Specific Regiters
------------------------------------
MSR_CORE_THREAD_COUNT......(0x35)  : 0x20004
MSR_PLATFORM_INFO..........(0xCE)  : 0x5053BF3011800
MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x1E008408
MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x51814
IA32_MPERF.................(0xE7)  : 0x195A4C8EFB
IA32_APERF.................(0xE8)  : 0x17B647E59F
MSR_FLEX_RATIO.............(0x194) : 0x0
MSR_IA32_PERF_STATUS.......(0x198) : 0x213D00001B00
MSR_IA32_PERF_CONTROL......(0x199) : 0x1B00
IA32_CLOCK_MODULATION......(0x19A) : 0x0
IA32_THERM_STATUS..........(0x19C) : 0x88330800
IA32_MISC_ENABLES..........(0x1A0) : 0x850089
MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001
MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x1D1D1D1D1D1E
IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x5
MSR_POWER_CTL..............(0x1FC) : 0x4005F
MSR_RAPL_POWER_UNIT........(0x606) : 0xA0E03
MSR_PKG_POWER_LIMIT........(0x610) : 0x804280C800DD8078
MSR_PKG_ENERGY_STATUS......(0x611) : 0x8B129A
MSR_PKG_POWER_INFO.........(0x614) : 0x78
MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x4010141400000100
MSR_PP0_POWER_LIMIT........(0x638) : 0x0
MSR_PP0_ENERGY_STATUS......(0x639) : 0x50433C
MSR_PP0_POLICY.............(0x63a) : 0x0
MSR_PKGC6_IRTL.............(0x60b) : 0x8873
MSR_PKGC7_IRTL.............(0x60c) : 0x8891
MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x19B221A1F8
MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x1FE340068
MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0xD59B08B78
MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0
IA32_TSC_DEADLINE..........(0x6E0) : 0x4BDC54DE83
PCH device.................: 0x9CC38086

Intel Register Data
------------------------------------
CPU_VGACNTRL...............: 0xFFFFFFFF
IS_HASWELL(devid) || IS_BROADWELL(devid)
HSW_PWR_WELL_CTL1..........: 0xffffffff
HSW_PWR_WELL_CTL2..........: 0xffffffff
HSW_PWR_WELL_CTL3..........: 0xffffffff
HSW_PWR_WELL_CTL4..........: 0xffffffff
HSW_PWR_WELL_CTL5..........: 0xffffffff
HSW_PWR_WELL_CTL6..........: 0xffffffff
PIPE_DDI_FUNC_CTL_A........: 0xffffffff (enabled, port reserved, mode reserved, bpc reserved, +VSync, +HSync, EDP input reserved, reserved width)
PIPE_DDI_FUNC_CTL_B........: 0xffffffff (enabled, port reserved, mode reserved, bpc reserved, +VSync, +HSync, EDP input reserved, reserved width)
PIPE_DDI_FUNC_CTL_C........: 0xffffffff (enabled, port reserved, mode reserved, bpc reserved, +VSync, +HSync, EDP input reserved, reserved width)
PIPE_DDI_FUNC_CTL_EDP......: 0xffffffff (enabled, port reserved, mode reserved, bpc reserved, +VSync, +HSync, EDP input reserved, reserved width)
DP_TP_CTL_A................: 0xffffffff
DP_TP_CTL_B................: 0xffffffff
DP_TP_CTL_C................: 0xffffffff
DP_TP_CTL_D................: 0xffffffff
DP_TP_CTL_E................: 0xffffffff
DP_TP_STATUS_A.............: 0xffffffff
DP_TP_STATUS_B.............: 0xffffffff
DP_TP_STATUS_C.............: 0xffffffff
DP_TP_STATUS_D.............: 0xffffffff
DP_TP_STATUS_E.............: 0xffffffff
DDI_BUF_CTL_A..............: 0xffffffff (enabled reversed reserved detected)
DDI_BUF_CTL_B..............: 0xffffffff (enabled reversed reserved detected)
DDI_BUF_CTL_C..............: 0xffffffff (enabled reversed reserved detected)
DDI_BUF_CTL_D..............: 0xffffffff (enabled reversed reserved detected)
DDI_BUF_CTL_E..............: 0xffffffff (enabled reversed reserved detected)
SPLL_CTL...................: 0xffffffff
LCPLL_CTL..................: 0xffffffff
WRPLL_CTL1.................: 0xffffffff
WRPLL_CTL2.................: 0xffffffff
PORT_CLK_SEL_A.............: 0xffffffff (None)
PORT_CLK_SEL_B.............: 0xffffffff (None)
PORT_CLK_SEL_C.............: 0xffffffff (None)
PORT_CLK_SEL_D.............: 0xffffffff (None)
PORT_CLK_SEL_E.............: 0xffffffff (None)
PIPE_CLK_SEL_A.............: 0xffffffff (Reserved)
PIPE_CLK_SEL_B.............: 0xffffffff (Reserved)
PIPE_CLK_SEL_C.............: 0xffffffff (Reserved)
SFUSE_STRAP................: 0xffffffff (display disabled, crt yes, lane reversal yes, port b yes, port c yes, port d yes)
PIPEASRC...................: 0xffffffff (65536, 65536)
DSPACNTR...................: 0xffffffff (enabled)
DSPASTRIDE.................: 0xffffffff (67108863)
DSPASURF...................: 0xff7fffff
DSPATILEOFF................: 0xffffffff (65535, 65535)
PIPEBSRC...................: 0xefffffff (61440, 65536)
DSPBCNTR...................: 0xffffffff (enabled)
DSPBSTRIDE.................: 0xffffffff (67108863)
DSPBSURF...................: 0xffffffff
DSPBTILEOFF................: 0xffffffff (65535, 65535)
PIPECSRC...................: 0xffffffff (65536, 65536)
DSPCCNTR...................: 0xfffffffb (enabled)
DSPCSTRIDE.................: 0xffffffff (67108863)
DSPCSURF...................: 0xffffffff
DSPCTILEOFF................: 0xffffffff (65535, 65535)
PIPEACONF..................: 0xffffffff (enabled, active, rsvd, rotate 270, invalid bpc)
HTOTAL_A...................: 0xffffffff (65536 active, 65536 total)
HBLANK_A...................: 0xffffffff (65536 start, 65536 end)
HSYNC_A....................: 0xffffffff (65536 start, 65536 end)
VTOTAL_A...................: 0xffffffff (65536 active, 65536 total)
VBLANK_A...................: 0xffffffff (65536 start, 65536 end)
VSYNC_A....................: 0xffffffff (65536 start, 65536 end)
VSYNCSHIFT_A...............: 0xffffffff
PIPEA_DATA_M1..............: 0xffffffff (TU 128, val 0xffffff 16777215)
PIPEA_DATA_N1..............: 0xffffffff (val 0xffffff 16777215)
PIPEA_LINK_M1..............: 0xffffffff (val 0xffffff 16777215)
PIPEA_LINK_N1..............: 0xff7fffff (val 0x7fffff 8388607)
PIPEBCONF..................: 0xffffffff (enabled, active, rsvd, rotate 270, invalid bpc)
HTOTAL_B...................: 0xffffffff (65536 active, 65536 total)
HBLANK_B...................: 0xffffffff (65536 start, 65536 end)
HSYNC_B....................: 0xffffffff (65536 start, 65536 end)
VTOTAL_B...................: 0xffffffff (65536 active, 65536 total)
VBLANK_B...................: 0xffffffff (65536 start, 65536 end)
VSYNC_B....................: 0xffffffff (65536 start, 65536 end)
VSYNCSHIFT_B...............: 0xffffffff
PIPEB_DATA_M1..............: 0xffffffff (TU 128, val 0xffffff 16777215)
PIPEB_DATA_N1..............: 0xffffffff (val 0xffffff 16777215)
PIPEB_LINK_M1..............: 0xffffffff (val 0xffffff 16777215)
PIPEB_LINK_N1..............: 0xdfffffff (val 0xffffff 16777215)
PIPECCONF..................: 0xffffffff (enabled, active, rsvd, rotate 270, invalid bpc)
HTOTAL_C...................: 0xffffffff (65536 active, 65536 total)
HBLANK_C...................: 0xffffffff (65536 start, 65536 end)
HSYNC_C....................: 0xffffffff (65536 start, 65536 end)
VTOTAL_C...................: 0xffffffff (65536 active, 65536 total)
VBLANK_C...................: 0xffffffff (65536 start, 65536 end)
VSYNC_C....................: 0xffffffff (65536 start, 65536 end)
VSYNCSHIFT_C...............: 0xffffffff
PIPEC_DATA_M1..............: 0xffffffff (TU 128, val 0xffffff 16777215)
PIPEC_DATA_N1..............: 0xffffffff (val 0xffffff 16777215)
PIPEC_LINK_M1..............: 0xffffffff (val 0xffffff 16777215)
PIPEC_LINK_N1..............: 0xffffffff (val 0xffffff 16777215)
PIPEEDPCONF................: 0xffffffff (enabled, active, rsvd, rotate 270, invalid bpc)
HTOTAL_EDP.................: 0xffffffff (65536 active, 65536 total)
HBLANK_EDP.................: 0xffffffff (65536 start, 65536 end)
HSYNC_EDP..................: 0xffffffff (65536 start, 65536 end)
VTOTAL_EDP.................: 0xffffffff (65536 active, 65536 total)
VBLANK_EDP.................: 0xffffffff (65536 start, 65536 end)
VSYNC_EDP..................: 0xffffffff (65536 start, 65536 end)
VSYNCSHIFT_EDP.............: 0xffffffff
PIPEEDP_DATA_M1............: 0xffffffff (TU 128, val 0xffffff 16777215)
PIPEEDP_DATA_N1............: 0xffffffff (val 0xffffff 16777215)
PIPEEDP_LINK_M1............: 0xffffffff (val 0xffffff 16777215)
PIPEEDP_LINK_N1............: 0xffffffff (val 0xffffff 16777215)
PFA_CTL_1..................: 0xffffffff (enable, auto_scale no, auto_scale_cal yes, v_filter bypass, vadapt enable, mode most, filter_sel edge_soften,chroma pre-filter enable, vert3tap force, v_inter_invert field 0)
PFA_WIN_POS................: 0xffffffff (8191, 4095)
PFA_WIN_SIZE...............: 0xffffffff (8191, 4095)
PFB_CTL_1..................: 0xffffffff (enable, auto_scale no, auto_scale_cal yes, v_filter bypass, vadapt enable, mode most, filter_sel edge_soften,chroma pre-filter enable, vert3tap force, v_inter_invert field 0)
PFB_WIN_POS................: 0xffffffff (8191, 4095)
PFB_WIN_SIZE...............: 0xffffffff (8191, 4095)
PFC_CTL_1..................: 0xffffffff (enable, auto_scale no, auto_scale_cal yes, v_filter bypass, vadapt enable, mode most, filter_sel edge_soften,chroma pre-filter enable, vert3tap force, v_inter_invert field 0)
PFC_WIN_POS................: 0xffffffff (8191, 4095)
PFC_WIN_SIZE...............: 0xffffefff (8191, 4095)
TRANS_HTOTAL_A.............: 0xffffffff (65536 active, 65536 total)
TRANS_HBLANK_A.............: 0xffffffff (65536 start, 65536 end)
TRANS_HSYNC_A..............: 0xffffffff (65536 start, 65536 end)
TRANS_VTOTAL_A.............: 0xffffffff (65536 active, 65536 total)
TRANS_VBLANK_A.............: 0xffffffff (65536 start, 65536 end)
TRANS_VSYNC_A..............: 0xffffffff (65536 start, 65536 end)
TRANS_VSYNCSHIFT_A.........: 0xffffffff
TRANSACONF.................: 0xffffffff (enable, active, rsvd)
FDI_RXA_MISC...............: 0xffffffff (FDI Delay 8191)
FDI_RXA_TUSIZE1............: 0xffffffff
FDI_RXA_IIR................: 0xffffffff
FDI_RXA_IMR................: 0xffffffff
BLC_PWM_CPU_CTL2...........: 0xffffffff (enable 1, pipe EDP, blinking 1, granularity 8)
BLC_PWM_CPU_CTL............: 0xffffffff (cycle 65535, freq 65535)
BLC_PWM2_CPU_CTL2..........: 0xffffffff (enable 1, pipe EDP, blinking 1, granularity 8)
BLC_PWM2_CPU_CTL...........: 0xffffffff (cycle 65535, freq 65535)
BLC_MISC_CTL...............: 0xffffffff (PWM1-CPU PWM2-PCH)
BLC_PWM_PCH_CTL1...........: 0xffffffff (enable 1, override 1, inverted polarity 1)
BLC_PWM_PCH_CTL2...........: 0xffffffff (freq 65535, cycle 65535)
UTIL_PIN_CTL...............: 0xffffffff (enable 1, transcoder EDP, mode reserved, data 1 inverted polarity 1)
PCH_PP_STATUS..............: 0xffffbfff (on, ready, sequencing unknown)
PCH_PP_CONTROL.............: 0xffffffff (blacklight enabled, power down on reset, panel on)
PCH_PP_ON_DELAYS...........: 0xffffffff
PCH_PP_OFF_DELAYS..........: 0xffffffff
PCH_PP_DIVISOR.............: 0xffffffff
PIXCLK_GATE................: 0xffffffff
SDEISR.....................: 0xffffffff (port d:1, port c:1, port b:1, crt:1)
RC6_RESIDENCY_TIME.........: 0xffffffff

CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 500 MHz
CPU Maximum non-Turbo Frequency....: 2400 MHz
CPU Maximum Turbo Frequency........: 3000 MHz

IGPU Info:
------------------------------------
IGPU Current Frequency.............:  300 MHz
IGPU Minimum Frequency.............:  300 MHz
IGPU Maximum Non-Turbo Frequency...:  300 MHz
IGPU Maximum Turbo Frequency.......:  950 MHz
IGPU Maximum limit.................: No Limit

CPU P-States [ (13) 22 27 ] iGPU P-States [ (6) ]
CPU C3-Cores [ 0 1 2 3 ]
CPU C6-Cores [ 0 1 2 3 ]
CPU C7-Cores [ 0 1 2 3 ]
CPU P-States [ (13) 14 22 27 ] iGPU P-States [ (6) ]
CPU P-States [ (13) 14 18 22 27 ] iGPU P-States [ (6) ]
CPU P-States [ (13) 14 18 22 24 27 ] iGPU P-States [ (6) ]
bash-3.2#
 
Thanks for your answer!

Interesting, I thought I had Power Management enabled with the SSDTs I generated following your guide regarding the MaciASL procedure. I have followed that guide, however, even though it seems it's enabled, the display still dies after wake from sleep.

You will need to submit updated files.
 
You will need to submit updated files.

Sure thing! Here's all the new info :). Note: I also changed cpu-type in Clover's config.plist to the suggested one by ssdtPRGen so the output was the same except with that warning removed. I've also noticed that there is more info in the AppleIntelInfo.dat file regarding the C/P states. The result is the same though, black screen:

kextstats:
Code:
MacBook-Pro-de-Dragon:~ dragon$ kextstat|grep -y acpiplat
   13    2 0xffffff7f833e4000 0x60000    0x60000    com.apple.driver.AppleACPIPlatform (5.0) D748FA50-380C-3F0D-BAD9-EB7A15848EA8 <12 11 7 6 5 4 3 1>
MacBook-Pro-de-Dragon:~ dragon$ kextstat|grep -y appleintelcpu
MacBook-Pro-de-Dragon:~ dragon$ kextstat|grep -y applelpc
  115    0 0xffffff7f82b44000 0x3000     0x3000     com.apple.driver.AppleLPC (3.1) F51595F0-F9B1-3B85-A1C3-F984DAD4107E <93 12 5 4 3>
MacBook-Pro-de-Dragon:~ dragon$ kextstat|grep -y applehda
  110    1 0xffffff7f82fcf000 0x1d000    0x1d000    com.apple.driver.AppleHDAController (276.26) D0953002-6091-376F-8E0F-33B65F42CEF9 <109 108 76 12 7 6 5 4 3 1>
  120    0 0xffffff7f83151000 0xb4000    0xb4000    com.apple.driver.AppleHDA (276.26) 7611D43E-12FE-3228-A6D3-9C99A5D030CC <119 110 109 108 86 76 6 5 4 3 1>
  121    0 0xffffff7f82fcb000 0x2000     0x2000     com.apple.driver.AppleHDAHardwareConfigDriver (276.26) D58BD3DA-EEDA-3845-9094-D33CB6E20BCE <4 3>
MacBook-Pro-de-Dragon:~ dragon$

kextcache:
Code:
MacBook-Pro-de-Dragon:~ dragon$ sudo touch /System/Library/Extensions && sudo kextcache -u /
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Trackpad.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Mouse.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Keyboard.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Controller.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Broadcom_WiFi.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmPatchRAM2.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmFirmwareData.kext
kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext AppleHDAHardwareConfigDriver.kext
kext-dev-mode allowing invalid signature -67061 0xFFFFFFFFFFFEFA0B for kext AppleHDA.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext PinConfigs.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext AppleALC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBatteryManager.kext
KernelCache ID: 08E3248AED41AA7B8B647236968329E3
symlink("/System/Library/PrelinkedKernels/prelinkedkernel", "/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache") failed 17 (File exists) <createPrelinkedKernel 2795>
MacBook-Pro-de-Dragon:~ dragon$

AppleIntelInfo.dat:
Code:
bash-3.2# kextload AppleIntelInfo.kext
bash-3.2# cat /tmp/AppleIntelInfo.dat

AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved

Settings:
------------------------------------
logMSRs............................: 1
logIGPU............................: 1
logIntelRegs.......................: 1
logCStates.........................: 1
logIPGStyle........................: 1
InitialTSC.........................: 0xa7beaa5911
MWAIT C-States.....................: 286531872

Model Specific Regiters
------------------------------------
MSR_CORE_THREAD_COUNT......(0x35)  : 0x20004
MSR_PLATFORM_INFO..........(0xCE)  : 0x5053BF3011800
MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x1E008408
MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x51814
IA32_MPERF.................(0xE7)  : 0x38FF2A3344
IA32_APERF.................(0xE8)  : 0x38A236C4B6
MSR_FLEX_RATIO.............(0x194) : 0x0
MSR_IA32_PERF_STATUS.......(0x198) : 0x213D00001B00
MSR_IA32_PERF_CONTROL......(0x199) : 0x1B00
IA32_CLOCK_MODULATION......(0x19A) : 0x0
IA32_THERM_STATUS..........(0x19C) : 0x88310800
IA32_MISC_ENABLES..........(0x1A0) : 0x850089
MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001
MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x1D1D1D1D1D1E
IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x5
MSR_POWER_CTL..............(0x1FC) : 0x4005F
MSR_RAPL_POWER_UNIT........(0x606) : 0xA0E03
MSR_PKG_POWER_LIMIT........(0x610) : 0x804280C800DD8078
MSR_PKG_ENERGY_STATUS......(0x611) : 0x18F4E3E
MSR_PKG_POWER_INFO.........(0x614) : 0x78
MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x4010141400000100
MSR_PP0_POWER_LIMIT........(0x638) : 0x0
MSR_PP0_ENERGY_STATUS......(0x639) : 0x10C6334
MSR_PP0_POLICY.............(0x63a) : 0x0
MSR_PKGC6_IRTL.............(0x60b) : 0x8873
MSR_PKGC7_IRTL.............(0x60c) : 0x8891
MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x2D4DCF4228
MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x398255C40
MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x1715ACACE0
MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0
IA32_TSC_DEADLINE..........(0x6E0) : 0xA7C32681BA
PCH device.................: 0x9CC38086

Intel Register Data
------------------------------------
CPU_VGACNTRL...............: 0xFFFFFFFF
IS_HASWELL(devid) || IS_BROADWELL(devid)
HSW_PWR_WELL_CTL1..........: 0xffffffff
HSW_PWR_WELL_CTL2..........: 0xffffffff
HSW_PWR_WELL_CTL3..........: 0xffffffff
HSW_PWR_WELL_CTL4..........: 0xffffffff
HSW_PWR_WELL_CTL5..........: 0xffffffff
HSW_PWR_WELL_CTL6..........: 0xffffffff
PIPE_DDI_FUNC_CTL_A........: 0xffffffff (enabled, port reserved, mode reserved, bpc reserved, +VSync, +HSync, EDP input reserved, reserved width)
PIPE_DDI_FUNC_CTL_B........: 0xffffffff (enabled, port reserved, mode reserved, bpc reserved, +VSync, +HSync, EDP input reserved, reserved width)
PIPE_DDI_FUNC_CTL_C........: 0xffffffff (enabled, port reserved, mode reserved, bpc reserved, +VSync, +HSync, EDP input reserved, reserved width)
PIPE_DDI_FUNC_CTL_EDP......: 0xffffffff (enabled, port reserved, mode reserved, bpc reserved, +VSync, +HSync, EDP input reserved, reserved width)
DP_TP_CTL_A................: 0xffffffff
DP_TP_CTL_B................: 0xffffffff
DP_TP_CTL_C................: 0xffffffff
DP_TP_CTL_D................: 0xffffffff
DP_TP_CTL_E................: 0x7fffffff
DP_TP_STATUS_A.............: 0xffffffff
DP_TP_STATUS_B.............: 0xffffffff
DP_TP_STATUS_C.............: 0xffffffff
DP_TP_STATUS_D.............: 0xffffffff
DP_TP_STATUS_E.............: 0xffffffff
DDI_BUF_CTL_A..............: 0xffffffff (enabled reversed reserved detected)
DDI_BUF_CTL_B..............: 0xffffffff (enabled reversed reserved detected)
DDI_BUF_CTL_C..............: 0xffffffff (enabled reversed reserved detected)
DDI_BUF_CTL_D..............: 0xffffffff (enabled reversed reserved detected)
DDI_BUF_CTL_E..............: 0xffffffff (enabled reversed reserved detected)
SPLL_CTL...................: 0xffffffff
LCPLL_CTL..................: 0xffffffff
WRPLL_CTL1.................: 0xffffffff
WRPLL_CTL2.................: 0xffffffff
PORT_CLK_SEL_A.............: 0xffffffff (None)
PORT_CLK_SEL_B.............: 0xffffffff (None)
PORT_CLK_SEL_C.............: 0xffffffff (None)
PORT_CLK_SEL_D.............: 0xffffffff (None)
PORT_CLK_SEL_E.............: 0xffffffff (None)
PIPE_CLK_SEL_A.............: 0xffffffff (Reserved)
PIPE_CLK_SEL_B.............: 0xffffffff (Reserved)
PIPE_CLK_SEL_C.............: 0xffffffff (Reserved)
SFUSE_STRAP................: 0xffffffff (display disabled, crt yes, lane reversal yes, port b yes, port c yes, port d yes)
PIPEASRC...................: 0xffffffff (65536, 65536)
DSPACNTR...................: 0xffffffff (enabled)
DSPASTRIDE.................: 0xffffffff (67108863)
DSPASURF...................: 0xffffffff
DSPATILEOFF................: 0xffffffff (65535, 65535)
PIPEBSRC...................: 0xefffffff (61440, 65536)
DSPBCNTR...................: 0xffffffff (enabled)
DSPBSTRIDE.................: 0xffffffff (67108863)
DSPBSURF...................: 0xffffffff
DSPBTILEOFF................: 0xffffffff (65535, 65535)
PIPECSRC...................: 0xffffffff (65536, 65536)
DSPCCNTR...................: 0xfffffffb (enabled)
DSPCSTRIDE.................: 0xffffffff (67108863)
DSPCSURF...................: 0xffffffff
DSPCTILEOFF................: 0xffffffff (65535, 65535)
PIPEACONF..................: 0xffffffff (enabled, active, rsvd, rotate 270, invalid bpc)
HTOTAL_A...................: 0xffffffff (65536 active, 65536 total)
HBLANK_A...................: 0xffffffff (65536 start, 65536 end)
HSYNC_A....................: 0xffffffff (65536 start, 65536 end)
VTOTAL_A...................: 0xffffffff (65536 active, 65536 total)
VBLANK_A...................: 0xffffffff (65536 start, 65536 end)
VSYNC_A....................: 0xffffffff (65536 start, 65536 end)
VSYNCSHIFT_A...............: 0xffffffff
PIPEA_DATA_M1..............: 0xffffffff (TU 128, val 0xffffff 16777215)
PIPEA_DATA_N1..............: 0xffffffff (val 0xffffff 16777215)
PIPEA_LINK_M1..............: 0xffffffff (val 0xffffff 16777215)
PIPEA_LINK_N1..............: 0xff7fffff (val 0x7fffff 8388607)
PIPEBCONF..................: 0xffffffff (enabled, active, rsvd, rotate 270, invalid bpc)
HTOTAL_B...................: 0xffffffff (65536 active, 65536 total)
HBLANK_B...................: 0xffffffff (65536 start, 65536 end)
HSYNC_B....................: 0xffffffff (65536 start, 65536 end)
VTOTAL_B...................: 0xffffffff (65536 active, 65536 total)
VBLANK_B...................: 0xffffffff (65536 start, 65536 end)
VSYNC_B....................: 0xffffffff (65536 start, 65536 end)
VSYNCSHIFT_B...............: 0xffffffff
PIPEB_DATA_M1..............: 0xffffffff (TU 128, val 0xffffff 16777215)
PIPEB_DATA_N1..............: 0xffffffff (val 0xffffff 16777215)
PIPEB_LINK_M1..............: 0xffffffff (val 0xffffff 16777215)
PIPEB_LINK_N1..............: 0xdfffffff (val 0xffffff 16777215)
PIPECCONF..................: 0xffffffff (enabled, active, rsvd, rotate 270, invalid bpc)
HTOTAL_C...................: 0xffffffff (65536 active, 65536 total)
HBLANK_C...................: 0xffffffff (65536 start, 65536 end)
HSYNC_C....................: 0xffffffff (65536 start, 65536 end)
VTOTAL_C...................: 0xffffffff (65536 active, 65536 total)
VBLANK_C...................: 0xffffffff (65536 start, 65536 end)
VSYNC_C....................: 0xffffffff (65536 start, 65536 end)
VSYNCSHIFT_C...............: 0xffffffff
PIPEC_DATA_M1..............: 0xffffffff (TU 128, val 0xffffff 16777215)
PIPEC_DATA_N1..............: 0xffffffff (val 0xffffff 16777215)
PIPEC_LINK_M1..............: 0xffffffff (val 0xffffff 16777215)
PIPEC_LINK_N1..............: 0xffffffff (val 0xffffff 16777215)
PIPEEDPCONF................: 0xffffffff (enabled, active, rsvd, rotate 270, invalid bpc)
HTOTAL_EDP.................: 0xffffffff (65536 active, 65536 total)
HBLANK_EDP.................: 0xffffffff (65536 start, 65536 end)
HSYNC_EDP..................: 0xffffffff (65536 start, 65536 end)
VTOTAL_EDP.................: 0xffffffff (65536 active, 65536 total)
VBLANK_EDP.................: 0xffffffff (65536 start, 65536 end)
VSYNC_EDP..................: 0xffffffff (65536 start, 65536 end)
VSYNCSHIFT_EDP.............: 0xffffffff
PIPEEDP_DATA_M1............: 0xffffffff (TU 128, val 0xffffff 16777215)
PIPEEDP_DATA_N1............: 0xffffffff (val 0xffffff 16777215)
PIPEEDP_LINK_M1............: 0xffffffff (val 0xffffff 16777215)
PIPEEDP_LINK_N1............: 0xffffffff (val 0xffffff 16777215)
PFA_CTL_1..................: 0xffffffff (enable, auto_scale no, auto_scale_cal yes, v_filter bypass, vadapt enable, mode most, filter_sel edge_soften,chroma pre-filter enable, vert3tap force, v_inter_invert field 0)
PFA_WIN_POS................: 0xffffffff (8191, 4095)
PFA_WIN_SIZE...............: 0xffffffff (8191, 4095)
PFB_CTL_1..................: 0xffffffff (enable, auto_scale no, auto_scale_cal yes, v_filter bypass, vadapt enable, mode most, filter_sel edge_soften,chroma pre-filter enable, vert3tap force, v_inter_invert field 0)
PFB_WIN_POS................: 0xffffffff (8191, 4095)
PFB_WIN_SIZE...............: 0xffffffff (8191, 4095)
PFC_CTL_1..................: 0xffffffff (enable, auto_scale no, auto_scale_cal yes, v_filter bypass, vadapt enable, mode most, filter_sel edge_soften,chroma pre-filter enable, vert3tap force, v_inter_invert field 0)
PFC_WIN_POS................: 0xffffffff (8191, 4095)
PFC_WIN_SIZE...............: 0xffffefff (8191, 4095)
TRANS_HTOTAL_A.............: 0xffffffff (65536 active, 65536 total)
TRANS_HBLANK_A.............: 0xffffffff (65536 start, 65536 end)
TRANS_HSYNC_A..............: 0xffffffff (65536 start, 65536 end)
TRANS_VTOTAL_A.............: 0xffffffff (65536 active, 65536 total)
TRANS_VBLANK_A.............: 0xffffffff (65536 start, 65536 end)
TRANS_VSYNC_A..............: 0xffffffff (65536 start, 65536 end)
TRANS_VSYNCSHIFT_A.........: 0xffffffff
TRANSACONF.................: 0xffffffff (enable, active, rsvd)
FDI_RXA_MISC...............: 0xffffffff (FDI Delay 8191)
FDI_RXA_TUSIZE1............: 0xffffffff
FDI_RXA_IIR................: 0xfffffff7
FDI_RXA_IMR................: 0xffffffff
BLC_PWM_CPU_CTL2...........: 0xffffffff (enable 1, pipe EDP, blinking 1, granularity 8)
BLC_PWM_CPU_CTL............: 0xffffffff (cycle 65535, freq 65535)
BLC_PWM2_CPU_CTL2..........: 0xffffffff (enable 1, pipe EDP, blinking 1, granularity 8)
BLC_PWM2_CPU_CTL...........: 0xffffffff (cycle 65535, freq 65535)
BLC_MISC_CTL...............: 0xffffffff (PWM1-CPU PWM2-PCH)
BLC_PWM_PCH_CTL1...........: 0xffffffff (enable 1, override 1, inverted polarity 1)
BLC_PWM_PCH_CTL2...........: 0xffffffff (freq 65535, cycle 65535)
UTIL_PIN_CTL...............: 0xffffffff (enable 1, transcoder EDP, mode reserved, data 1 inverted polarity 1)
PCH_PP_STATUS..............: 0xffffbfff (on, ready, sequencing unknown)
PCH_PP_CONTROL.............: 0xffffffff (blacklight enabled, power down on reset, panel on)
PCH_PP_ON_DELAYS...........: 0xffffffff
PCH_PP_OFF_DELAYS..........: 0xffffffff
PCH_PP_DIVISOR.............: 0xffffffff
PIXCLK_GATE................: 0xffffffff
SDEISR.....................: 0xffffffff (port d:1, port c:1, port b:1, crt:1)
RC6_RESIDENCY_TIME.........: 0xffffffff

CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 500 MHz
CPU Maximum non-Turbo Frequency....: 2400 MHz
CPU Maximum Turbo Frequency........: 3000 MHz

IGPU Info:
------------------------------------
IGPU Current Frequency.............:  300 MHz
IGPU Minimum Frequency.............:  300 MHz
IGPU Maximum Non-Turbo Frequency...:  300 MHz
IGPU Maximum Turbo Frequency.......:  950 MHz
IGPU Maximum limit.................: No Limit

CPU P-States [ (14) 24 27 ] iGPU P-States [ (6) ]
CPU C3-Cores [ 0 1 2 3 ]
CPU C6-Cores [ 0 1 2 3 ]
CPU C7-Cores [ 0 1 2 3 ]
CPU P-States [ (13) 14 24 27 ] iGPU P-States [ (6) ]
CPU P-States [ (13) 14 17 24 27 ] iGPU P-States [ (6) ]
CPU P-States [ (13) 14 16 17 24 27 ] iGPU P-States [ (6) ]
CPU P-States [ (13) 14 15 16 17 24 27 ] iGPU P-States [ (6) ]
CPU P-States [ (13) 14 15 16 17 18 24 27 ] iGPU P-States [ (6) ]
CPU P-States [ 13 (14) 15 16 17 18 24 25 27 ] iGPU P-States [ (6) ]
CPU P-States [ 13 (14) 15 16 17 18 20 24 25 27 ] iGPU P-States [ (6) ]
CPU P-States [ 13 (14) 15 16 17 18 20 21 24 25 27 ] iGPU P-States [ (6) ]
CPU P-States [ 13 14 15 16 17 18 20 21 22 (24) 25 27 ] iGPU P-States [ (6) ]
CPU P-States [ 13 14 15 16 17 18 20 21 22 23 24 25 (26) 27 ] iGPU P-States [ (6) ]
CPU P-States [ 13 14 15 16 17 18 20 21 22 23 24 25 26 27 (29) ] iGPU P-States [ (6) ]
CPU P-States [ 13 14 15 16 17 18 20 21 22 23 24 (25) 26 27 28 29 ] iGPU P-States [ (6) ]
CPU P-States [ 13 (14) 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 ] iGPU P-States [ (6) ]
CPU P-States [ 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 (30) ] iGPU P-States [ (6) ]
bash-3.2#

I've also attached new versions of the Clover folder and the IOReg in ZIP format as requested :)
 

Attachments

  • CLOVER.zip
    1.6 MB · Views: 99
  • Dragon's MacBook Pro.ioreg.zip
    740.2 KB · Views: 74
Sure thing! Here's all the new info :). Note: I also changed cpu-type in Clover's config.plist to the suggested one by ssdtPRGen so the output was the same except with that warning removed. I've also noticed that there is more info in the AppleIntelInfo.dat file regarding the C/P states. The result is the same though, black screen:

kextstats:
Code:
MacBook-Pro-de-Dragon:~ dragon$ kextstat|grep -y acpiplat
   13    2 0xffffff7f833e4000 0x60000    0x60000    com.apple.driver.AppleACPIPlatform (5.0) D748FA50-380C-3F0D-BAD9-EB7A15848EA8 <12 11 7 6 5 4 3 1>
MacBook-Pro-de-Dragon:~ dragon$ kextstat|grep -y appleintelcpu
MacBook-Pro-de-Dragon:~ dragon$ kextstat|grep -y applelpc
  115    0 0xffffff7f82b44000 0x3000     0x3000     com.apple.driver.AppleLPC (3.1) F51595F0-F9B1-3B85-A1C3-F984DAD4107E <93 12 5 4 3>
MacBook-Pro-de-Dragon:~ dragon$ kextstat|grep -y applehda
  110    1 0xffffff7f82fcf000 0x1d000    0x1d000    com.apple.driver.AppleHDAController (276.26) D0953002-6091-376F-8E0F-33B65F42CEF9 <109 108 76 12 7 6 5 4 3 1>
  120    0 0xffffff7f83151000 0xb4000    0xb4000    com.apple.driver.AppleHDA (276.26) 7611D43E-12FE-3228-A6D3-9C99A5D030CC <119 110 109 108 86 76 6 5 4 3 1>
  121    0 0xffffff7f82fcb000 0x2000     0x2000     com.apple.driver.AppleHDAHardwareConfigDriver (276.26) D58BD3DA-EEDA-3845-9094-D33CB6E20BCE <4 3>
MacBook-Pro-de-Dragon:~ dragon$

kextcache:
Code:
MacBook-Pro-de-Dragon:~ dragon$ sudo touch /System/Library/Extensions && sudo kextcache -u /
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Trackpad.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Mouse.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Keyboard.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Controller.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Broadcom_WiFi.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmPatchRAM2.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmFirmwareData.kext
kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext AppleHDAHardwareConfigDriver.kext
kext-dev-mode allowing invalid signature -67061 0xFFFFFFFFFFFEFA0B for kext AppleHDA.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext PinConfigs.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext AppleALC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBatteryManager.kext
KernelCache ID: 08E3248AED41AA7B8B647236968329E3
symlink("/System/Library/PrelinkedKernels/prelinkedkernel", "/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache") failed 17 (File exists) <createPrelinkedKernel 2795>
MacBook-Pro-de-Dragon:~ dragon$

AppleIntelInfo.dat:
Code:
bash-3.2# kextload AppleIntelInfo.kext
bash-3.2# cat /tmp/AppleIntelInfo.dat

AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved

Settings:
------------------------------------
logMSRs............................: 1
logIGPU............................: 1
logIntelRegs.......................: 1
logCStates.........................: 1
logIPGStyle........................: 1
InitialTSC.........................: 0xa7beaa5911
MWAIT C-States.....................: 286531872

Model Specific Regiters
------------------------------------
MSR_CORE_THREAD_COUNT......(0x35)  : 0x20004
MSR_PLATFORM_INFO..........(0xCE)  : 0x5053BF3011800
MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x1E008408
MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x51814
IA32_MPERF.................(0xE7)  : 0x38FF2A3344
IA32_APERF.................(0xE8)  : 0x38A236C4B6
MSR_FLEX_RATIO.............(0x194) : 0x0
MSR_IA32_PERF_STATUS.......(0x198) : 0x213D00001B00
MSR_IA32_PERF_CONTROL......(0x199) : 0x1B00
IA32_CLOCK_MODULATION......(0x19A) : 0x0
IA32_THERM_STATUS..........(0x19C) : 0x88310800
IA32_MISC_ENABLES..........(0x1A0) : 0x850089
MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001
MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x1D1D1D1D1D1E
IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x5
MSR_POWER_CTL..............(0x1FC) : 0x4005F
MSR_RAPL_POWER_UNIT........(0x606) : 0xA0E03
MSR_PKG_POWER_LIMIT........(0x610) : 0x804280C800DD8078
MSR_PKG_ENERGY_STATUS......(0x611) : 0x18F4E3E
MSR_PKG_POWER_INFO.........(0x614) : 0x78
MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x4010141400000100
MSR_PP0_POWER_LIMIT........(0x638) : 0x0
MSR_PP0_ENERGY_STATUS......(0x639) : 0x10C6334
MSR_PP0_POLICY.............(0x63a) : 0x0
MSR_PKGC6_IRTL.............(0x60b) : 0x8873
MSR_PKGC7_IRTL.............(0x60c) : 0x8891
MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x2D4DCF4228
MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x398255C40
MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x1715ACACE0
MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0
IA32_TSC_DEADLINE..........(0x6E0) : 0xA7C32681BA
PCH device.................: 0x9CC38086

Intel Register Data
------------------------------------
CPU_VGACNTRL...............: 0xFFFFFFFF
IS_HASWELL(devid) || IS_BROADWELL(devid)
HSW_PWR_WELL_CTL1..........: 0xffffffff
HSW_PWR_WELL_CTL2..........: 0xffffffff
HSW_PWR_WELL_CTL3..........: 0xffffffff
HSW_PWR_WELL_CTL4..........: 0xffffffff
HSW_PWR_WELL_CTL5..........: 0xffffffff
HSW_PWR_WELL_CTL6..........: 0xffffffff
PIPE_DDI_FUNC_CTL_A........: 0xffffffff (enabled, port reserved, mode reserved, bpc reserved, +VSync, +HSync, EDP input reserved, reserved width)
PIPE_DDI_FUNC_CTL_B........: 0xffffffff (enabled, port reserved, mode reserved, bpc reserved, +VSync, +HSync, EDP input reserved, reserved width)
PIPE_DDI_FUNC_CTL_C........: 0xffffffff (enabled, port reserved, mode reserved, bpc reserved, +VSync, +HSync, EDP input reserved, reserved width)
PIPE_DDI_FUNC_CTL_EDP......: 0xffffffff (enabled, port reserved, mode reserved, bpc reserved, +VSync, +HSync, EDP input reserved, reserved width)
DP_TP_CTL_A................: 0xffffffff
DP_TP_CTL_B................: 0xffffffff
DP_TP_CTL_C................: 0xffffffff
DP_TP_CTL_D................: 0xffffffff
DP_TP_CTL_E................: 0x7fffffff
DP_TP_STATUS_A.............: 0xffffffff
DP_TP_STATUS_B.............: 0xffffffff
DP_TP_STATUS_C.............: 0xffffffff
DP_TP_STATUS_D.............: 0xffffffff
DP_TP_STATUS_E.............: 0xffffffff
DDI_BUF_CTL_A..............: 0xffffffff (enabled reversed reserved detected)
DDI_BUF_CTL_B..............: 0xffffffff (enabled reversed reserved detected)
DDI_BUF_CTL_C..............: 0xffffffff (enabled reversed reserved detected)
DDI_BUF_CTL_D..............: 0xffffffff (enabled reversed reserved detected)
DDI_BUF_CTL_E..............: 0xffffffff (enabled reversed reserved detected)
SPLL_CTL...................: 0xffffffff
LCPLL_CTL..................: 0xffffffff
WRPLL_CTL1.................: 0xffffffff
WRPLL_CTL2.................: 0xffffffff
PORT_CLK_SEL_A.............: 0xffffffff (None)
PORT_CLK_SEL_B.............: 0xffffffff (None)
PORT_CLK_SEL_C.............: 0xffffffff (None)
PORT_CLK_SEL_D.............: 0xffffffff (None)
PORT_CLK_SEL_E.............: 0xffffffff (None)
PIPE_CLK_SEL_A.............: 0xffffffff (Reserved)
PIPE_CLK_SEL_B.............: 0xffffffff (Reserved)
PIPE_CLK_SEL_C.............: 0xffffffff (Reserved)
SFUSE_STRAP................: 0xffffffff (display disabled, crt yes, lane reversal yes, port b yes, port c yes, port d yes)
PIPEASRC...................: 0xffffffff (65536, 65536)
DSPACNTR...................: 0xffffffff (enabled)
DSPASTRIDE.................: 0xffffffff (67108863)
DSPASURF...................: 0xffffffff
DSPATILEOFF................: 0xffffffff (65535, 65535)
PIPEBSRC...................: 0xefffffff (61440, 65536)
DSPBCNTR...................: 0xffffffff (enabled)
DSPBSTRIDE.................: 0xffffffff (67108863)
DSPBSURF...................: 0xffffffff
DSPBTILEOFF................: 0xffffffff (65535, 65535)
PIPECSRC...................: 0xffffffff (65536, 65536)
DSPCCNTR...................: 0xfffffffb (enabled)
DSPCSTRIDE.................: 0xffffffff (67108863)
DSPCSURF...................: 0xffffffff
DSPCTILEOFF................: 0xffffffff (65535, 65535)
PIPEACONF..................: 0xffffffff (enabled, active, rsvd, rotate 270, invalid bpc)
HTOTAL_A...................: 0xffffffff (65536 active, 65536 total)
HBLANK_A...................: 0xffffffff (65536 start, 65536 end)
HSYNC_A....................: 0xffffffff (65536 start, 65536 end)
VTOTAL_A...................: 0xffffffff (65536 active, 65536 total)
VBLANK_A...................: 0xffffffff (65536 start, 65536 end)
VSYNC_A....................: 0xffffffff (65536 start, 65536 end)
VSYNCSHIFT_A...............: 0xffffffff
PIPEA_DATA_M1..............: 0xffffffff (TU 128, val 0xffffff 16777215)
PIPEA_DATA_N1..............: 0xffffffff (val 0xffffff 16777215)
PIPEA_LINK_M1..............: 0xffffffff (val 0xffffff 16777215)
PIPEA_LINK_N1..............: 0xff7fffff (val 0x7fffff 8388607)
PIPEBCONF..................: 0xffffffff (enabled, active, rsvd, rotate 270, invalid bpc)
HTOTAL_B...................: 0xffffffff (65536 active, 65536 total)
HBLANK_B...................: 0xffffffff (65536 start, 65536 end)
HSYNC_B....................: 0xffffffff (65536 start, 65536 end)
VTOTAL_B...................: 0xffffffff (65536 active, 65536 total)
VBLANK_B...................: 0xffffffff (65536 start, 65536 end)
VSYNC_B....................: 0xffffffff (65536 start, 65536 end)
VSYNCSHIFT_B...............: 0xffffffff
PIPEB_DATA_M1..............: 0xffffffff (TU 128, val 0xffffff 16777215)
PIPEB_DATA_N1..............: 0xffffffff (val 0xffffff 16777215)
PIPEB_LINK_M1..............: 0xffffffff (val 0xffffff 16777215)
PIPEB_LINK_N1..............: 0xdfffffff (val 0xffffff 16777215)
PIPECCONF..................: 0xffffffff (enabled, active, rsvd, rotate 270, invalid bpc)
HTOTAL_C...................: 0xffffffff (65536 active, 65536 total)
HBLANK_C...................: 0xffffffff (65536 start, 65536 end)
HSYNC_C....................: 0xffffffff (65536 start, 65536 end)
VTOTAL_C...................: 0xffffffff (65536 active, 65536 total)
VBLANK_C...................: 0xffffffff (65536 start, 65536 end)
VSYNC_C....................: 0xffffffff (65536 start, 65536 end)
VSYNCSHIFT_C...............: 0xffffffff
PIPEC_DATA_M1..............: 0xffffffff (TU 128, val 0xffffff 16777215)
PIPEC_DATA_N1..............: 0xffffffff (val 0xffffff 16777215)
PIPEC_LINK_M1..............: 0xffffffff (val 0xffffff 16777215)
PIPEC_LINK_N1..............: 0xffffffff (val 0xffffff 16777215)
PIPEEDPCONF................: 0xffffffff (enabled, active, rsvd, rotate 270, invalid bpc)
HTOTAL_EDP.................: 0xffffffff (65536 active, 65536 total)
HBLANK_EDP.................: 0xffffffff (65536 start, 65536 end)
HSYNC_EDP..................: 0xffffffff (65536 start, 65536 end)
VTOTAL_EDP.................: 0xffffffff (65536 active, 65536 total)
VBLANK_EDP.................: 0xffffffff (65536 start, 65536 end)
VSYNC_EDP..................: 0xffffffff (65536 start, 65536 end)
VSYNCSHIFT_EDP.............: 0xffffffff
PIPEEDP_DATA_M1............: 0xffffffff (TU 128, val 0xffffff 16777215)
PIPEEDP_DATA_N1............: 0xffffffff (val 0xffffff 16777215)
PIPEEDP_LINK_M1............: 0xffffffff (val 0xffffff 16777215)
PIPEEDP_LINK_N1............: 0xffffffff (val 0xffffff 16777215)
PFA_CTL_1..................: 0xffffffff (enable, auto_scale no, auto_scale_cal yes, v_filter bypass, vadapt enable, mode most, filter_sel edge_soften,chroma pre-filter enable, vert3tap force, v_inter_invert field 0)
PFA_WIN_POS................: 0xffffffff (8191, 4095)
PFA_WIN_SIZE...............: 0xffffffff (8191, 4095)
PFB_CTL_1..................: 0xffffffff (enable, auto_scale no, auto_scale_cal yes, v_filter bypass, vadapt enable, mode most, filter_sel edge_soften,chroma pre-filter enable, vert3tap force, v_inter_invert field 0)
PFB_WIN_POS................: 0xffffffff (8191, 4095)
PFB_WIN_SIZE...............: 0xffffffff (8191, 4095)
PFC_CTL_1..................: 0xffffffff (enable, auto_scale no, auto_scale_cal yes, v_filter bypass, vadapt enable, mode most, filter_sel edge_soften,chroma pre-filter enable, vert3tap force, v_inter_invert field 0)
PFC_WIN_POS................: 0xffffffff (8191, 4095)
PFC_WIN_SIZE...............: 0xffffefff (8191, 4095)
TRANS_HTOTAL_A.............: 0xffffffff (65536 active, 65536 total)
TRANS_HBLANK_A.............: 0xffffffff (65536 start, 65536 end)
TRANS_HSYNC_A..............: 0xffffffff (65536 start, 65536 end)
TRANS_VTOTAL_A.............: 0xffffffff (65536 active, 65536 total)
TRANS_VBLANK_A.............: 0xffffffff (65536 start, 65536 end)
TRANS_VSYNC_A..............: 0xffffffff (65536 start, 65536 end)
TRANS_VSYNCSHIFT_A.........: 0xffffffff
TRANSACONF.................: 0xffffffff (enable, active, rsvd)
FDI_RXA_MISC...............: 0xffffffff (FDI Delay 8191)
FDI_RXA_TUSIZE1............: 0xffffffff
FDI_RXA_IIR................: 0xfffffff7
FDI_RXA_IMR................: 0xffffffff
BLC_PWM_CPU_CTL2...........: 0xffffffff (enable 1, pipe EDP, blinking 1, granularity 8)
BLC_PWM_CPU_CTL............: 0xffffffff (cycle 65535, freq 65535)
BLC_PWM2_CPU_CTL2..........: 0xffffffff (enable 1, pipe EDP, blinking 1, granularity 8)
BLC_PWM2_CPU_CTL...........: 0xffffffff (cycle 65535, freq 65535)
BLC_MISC_CTL...............: 0xffffffff (PWM1-CPU PWM2-PCH)
BLC_PWM_PCH_CTL1...........: 0xffffffff (enable 1, override 1, inverted polarity 1)
BLC_PWM_PCH_CTL2...........: 0xffffffff (freq 65535, cycle 65535)
UTIL_PIN_CTL...............: 0xffffffff (enable 1, transcoder EDP, mode reserved, data 1 inverted polarity 1)
PCH_PP_STATUS..............: 0xffffbfff (on, ready, sequencing unknown)
PCH_PP_CONTROL.............: 0xffffffff (blacklight enabled, power down on reset, panel on)
PCH_PP_ON_DELAYS...........: 0xffffffff
PCH_PP_OFF_DELAYS..........: 0xffffffff
PCH_PP_DIVISOR.............: 0xffffffff
PIXCLK_GATE................: 0xffffffff
SDEISR.....................: 0xffffffff (port d:1, port c:1, port b:1, crt:1)
RC6_RESIDENCY_TIME.........: 0xffffffff

CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 500 MHz
CPU Maximum non-Turbo Frequency....: 2400 MHz
CPU Maximum Turbo Frequency........: 3000 MHz

IGPU Info:
------------------------------------
IGPU Current Frequency.............:  300 MHz
IGPU Minimum Frequency.............:  300 MHz
IGPU Maximum Non-Turbo Frequency...:  300 MHz
IGPU Maximum Turbo Frequency.......:  950 MHz
IGPU Maximum limit.................: No Limit

CPU P-States [ (14) 24 27 ] iGPU P-States [ (6) ]
CPU C3-Cores [ 0 1 2 3 ]
CPU C6-Cores [ 0 1 2 3 ]
CPU C7-Cores [ 0 1 2 3 ]
CPU P-States [ (13) 14 24 27 ] iGPU P-States [ (6) ]
CPU P-States [ (13) 14 17 24 27 ] iGPU P-States [ (6) ]
CPU P-States [ (13) 14 16 17 24 27 ] iGPU P-States [ (6) ]
CPU P-States [ (13) 14 15 16 17 24 27 ] iGPU P-States [ (6) ]
CPU P-States [ (13) 14 15 16 17 18 24 27 ] iGPU P-States [ (6) ]
CPU P-States [ 13 (14) 15 16 17 18 24 25 27 ] iGPU P-States [ (6) ]
CPU P-States [ 13 (14) 15 16 17 18 20 24 25 27 ] iGPU P-States [ (6) ]
CPU P-States [ 13 (14) 15 16 17 18 20 21 24 25 27 ] iGPU P-States [ (6) ]
CPU P-States [ 13 14 15 16 17 18 20 21 22 (24) 25 27 ] iGPU P-States [ (6) ]
CPU P-States [ 13 14 15 16 17 18 20 21 22 23 24 25 (26) 27 ] iGPU P-States [ (6) ]
CPU P-States [ 13 14 15 16 17 18 20 21 22 23 24 25 26 27 (29) ] iGPU P-States [ (6) ]
CPU P-States [ 13 14 15 16 17 18 20 21 22 23 24 (25) 26 27 28 29 ] iGPU P-States [ (6) ]
CPU P-States [ 13 (14) 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 ] iGPU P-States [ (6) ]
CPU P-States [ 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 (30) ] iGPU P-States [ (6) ]
bash-3.2#

I've also attached new versions of the Clover folder and the IOReg in ZIP format as requested :)

You didn't press F4 to collect ACPI/origin.
Backlight control is not implemented correctly... see guide: https://www.tonymacx86.com/threads/guide-patching-dsdt-ssdt-for-laptop-backlight-control.152659/
 
You didn't press F4 to collect ACPI/origin.
Backlight control is not implemented correctly... see guide: https://www.tonymacx86.com/threads/guide-patching-dsdt-ssdt-for-laptop-backlight-control.152659/
Actually I did, how else would have I been able to get those files? I pressed both F4 and Fn+F4 just to be sure, waited for about 10 seconds and kept on booting. Unless I'm missing to set/unset some flags in Clover prior to pressing F4?

I implemented the backlight using the PNLF flag in Clover and that way I got the brightness slider working. I will try to follow that guide and will report back, thanks!
 
Status
Not open for further replies.
Back
Top