- Joined
- Dec 21, 2020
- Messages
- 5
- Motherboard
- HP Z440 - M60 v2.43,
- CPU
- E5-2680 v3
- Graphics
- GTX 1070 Ti
- Mac
Hi
Trying to be short here...
I had a working installation from approx. a year ago from Unibeast with Clover 4428. Some random halts during startup, but mostly ok. No backups, and I updated Clover, after which my system doesn't start. I've tried fiddling with Clover, and now OpenCore 0.6.4 for approx. a week pretty much all time I could spare. This has taken too much of my winter holidays .
Following the OC installation guide as pedantically as I could, the install halts with the following:
66:961 00:865 OCSMC: SmcReadValue Key 4D535463 Size 1
67:014 00:052 OCSMC: SmcReadValue Key 4D534163 Size 2
67:075 00:060 OCABC: MMIO devirt start
67:127 00:052 OCABC: MMIO devirt 0xD0000000 (0x10000 pages, 0x8000000000000000) skip 0
67:180 00:052 OCABC: MMIO devirt 0xFED1C000 (0x4 pages, 0x8000000000000001) skip 1
67:242 00:061 OCABC: MMIO devirt end, saved 262144 KB
Last bug I found from my config was to force a specific slide, after which the boot didn't halt to the MscReadValue Key ... 2.
I'm trying to get the OS booting my GTX 1070 in VESA mode, and I'll focus on the web drivers when the system otherwise boots up.
Specs are:
HP Z440 - C612 chipset - M60 v2.43, 06/12/2020 - OpenCore 0.6.4
CPU E5-2680 v3 (Hashwell-EP) - 12 cores - 2.5 GHz
GFX: Nvidia GTX 1070 Ti
I know nvidia is troublesome, however as the system worked for a year quite well, I'm sure it's possible to re-install somehow.
BIOS setup as images in separate zip file.
I would like to get OC working, however I don't mind Clover install either. I would assume an Unibeast with 4428 Clover might do the trick as it worked previously. How to change the clover version in unibeast is however beyond my skills.
EFI.zip includes also my memmap.txt from OpenShell, as well as three debug logs, where I've tried the MmioWhitelist, to which I could've used more information from the install guide page.
All tips and hints are most welcome!
Happy holidays to all!
Trying to be short here...
I had a working installation from approx. a year ago from Unibeast with Clover 4428. Some random halts during startup, but mostly ok. No backups, and I updated Clover, after which my system doesn't start. I've tried fiddling with Clover, and now OpenCore 0.6.4 for approx. a week pretty much all time I could spare. This has taken too much of my winter holidays .
Following the OC installation guide as pedantically as I could, the install halts with the following:
66:961 00:865 OCSMC: SmcReadValue Key 4D535463 Size 1
67:014 00:052 OCSMC: SmcReadValue Key 4D534163 Size 2
67:075 00:060 OCABC: MMIO devirt start
67:127 00:052 OCABC: MMIO devirt 0xD0000000 (0x10000 pages, 0x8000000000000000) skip 0
67:180 00:052 OCABC: MMIO devirt 0xFED1C000 (0x4 pages, 0x8000000000000001) skip 1
67:242 00:061 OCABC: MMIO devirt end, saved 262144 KB
Last bug I found from my config was to force a specific slide, after which the boot didn't halt to the MscReadValue Key ... 2.
I'm trying to get the OS booting my GTX 1070 in VESA mode, and I'll focus on the web drivers when the system otherwise boots up.
Specs are:
HP Z440 - C612 chipset - M60 v2.43, 06/12/2020 - OpenCore 0.6.4
CPU E5-2680 v3 (Hashwell-EP) - 12 cores - 2.5 GHz
GFX: Nvidia GTX 1070 Ti
I know nvidia is troublesome, however as the system worked for a year quite well, I'm sure it's possible to re-install somehow.
BIOS setup as images in separate zip file.
I would like to get OC working, however I don't mind Clover install either. I would assume an Unibeast with 4428 Clover might do the trick as it worked previously. How to change the clover version in unibeast is however beyond my skills.
EFI.zip includes also my memmap.txt from OpenShell, as well as three debug logs, where I've tried the MmioWhitelist, to which I could've used more information from the install guide page.
All tips and hints are most welcome!
Happy holidays to all!