RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,006
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
Ah, that famous @RehabMan charm.
Thanks for taking a look and for the feedback. I re-patched taking all of this on board and also implemented CPUPM. Still having the same issue, although strangely yesterday I managed to start up and shut down/reboot several times without the battery status breaking. I used the ACPIBatteryManager debug kext and found that when the status isn't working, these four values never change:
ACPIBatteryManager: fCurrentRate = 1938
ACPIBatteryManager: fCurrentCapacity = 4448
ACPIBatteryManager: fCurrentVoltage = 7964
ACPIBatteryManager: fAverageRate = 1938
Also, when battery status stops working in macOS, it's also broken when booting into Windows and only resets if you physically recalibrate by holding the power button down whilst plugging in the AC... even then I sometimes have to do it a couple of times before it works.
Any other ideas at all, or might I just have to accept that this is never going to work properly?
Read battery guide, post #1, "Problem Reporting".