- Joined
- Apr 22, 2011
- Messages
- 43
- Motherboard
- ASROCK H270 Pro4
- CPU
- i7-3930K
- Graphics
- GTX 670
How can we test?
Searching for AGPM in IOReg will show something like this if you have it working:
And this if you do not:
How can we test?
Upon boot? Which issue? What do you mean by this?
1:30 am.. off to bed sorry..
If I boot with NvidiaFixup kext, I get a black screen upon boot. If I boot without the kext I don't get a black screen at boot, however if the displays sleep or are turned off I will get a black screen. Prior to 10.13.5 this was not an issue.
Been going back and forth with toleda on this in the official thread, so I'll ask here again:
Does anyone using iMacPro1,1 (which should be everyone here, if you are following kgp's guide) have AGPM working with Nvidia?
I have
https://www.asus.com/us/Motherboards/ROG-STRIX-X299-E-GAMING/
where Can I make the bios patch?
Thank you however from the guide there is not super clear when to do it - it is pre installation or post installation, if preistallation - what computer I have to use - win or mac ...Why not? Anyway, you do it at your oen risk.
Thank you however from the guide there is not super clear when to do it - it is pre installation or post installation, if preistallation - what computer I have to use - win or mac ...
Thank you
Does anyone can post a link or a guide of how to correctly find the correct hex codes for the cpu implementation.
In the guide it shows 56 cp## -> pr## codes for the 7980xe.
I only have a 7940X, so I want to do this for my cpu as well, but I noticed I don't know how to, sorry.
I have IOReg. Maybe someone can help? I can post the codes (once generated) if needed.
Thank you.