Help: Mavericks on GA z87m d3h

[superarni]

My system:
GA z87m d3h
Intel 4670k

I created a boot stick via unibeast.

I only get to IOBluetooth.... complete, just before graphics initialization.
I already deleted bluetooth Kexts and so on.
Bios settings are default, except AHCI mode.

does anyone know what to do next?

 

[Hambone]

Sounds like you'll probably need to employ some boot flags to get into the installer.

"If you have trouble reaching the installer, type -x at the Boot screen.

You can type the boot flags GraphicsEnabler=Yes, PCIRootUID=1, PCIRootUID=0, and npci=0x3000 by themselves or together in order to solve boot issues for older graphics cards and machines."

booting in safe mode or using these flags is sufficient to install. Even though you might not have full functionality of all your hardware and peripherals during the install, all you really need is a working keyboard/mouse and graphics to see what you're doing!

Then once you get it installed, keep using safe mode or whichever of these flags works until you get your MultiBeast settings tuned. Then you can boot normally and have everything working again.

 

[BadKarma]

See:

http://www.tonymacx86.com/mavericks-desktop-support/115855-ga-z87m-d3h-mavericks-install-issues.html

 

[Adrian B]

My system:
GA z87m d3h
Intel 4670k

I created a boot stick via unibeast.

I only get to IOBluetooth.... complete, just before graphics initialization.
I already deleted bluetooth Kexts and so on.
Bios settings are default, except AHCI mode.

does anyone know what to do next?

This sounds like a graphics problem. How are you connecting to your monitor, is it A DVI-D or HDMI cable? A VGA cable will not work.

Adrian B

 

[ajid6888]

disable VT-d in bios configuration

 

[Adrian B]

disable VT-d in bios configuration

NOT required with this processor "Intel 4670k"

Adrian B